Transcript
Lytespan® Track Lighting System dr2c Page 1 of 1 Director® Sequencing Laser Remote Control 5 11/16” (145) 2 3/16” (55) Ordering Information Catalog No. Finishes Luminaire Compatibility dr2c Compatible with all Lytespan, ProSpec and Monopoint Director Remote Controlled luminaires. Silver Description Hand-held controller equipped with a laser and infrared transmitters that is used to aim and change light levels of Director luminaires from a remote location. The visible laser selects the unit and allows it to receive movement and dimming commands by infrared. The laser signal accuracy allows a single unit to be easily selected, however any number of Director luminaires can be controlled by a single controller. The controller allows the user to remotely aim the unit, set the light level and set up timed sequences of moves. Electrical Uses (3) AAA batteries (provided). Features 1.LCD Display 2. Tilt Up 3. Select: Activates laser. 4. Tilt Down 5. Step: Allows stepping through a sequence one position at a time. 6. Edit: For editing a position. 7. Go: Starts a sequence 8.Record: For recording a sequence. 9. Global Command Buttons: Allows recording and recalling of a sequence for a group of Directors without the need to select them first with the laser. 10.Pan Right 11.Pan Left 12.Dim Up (low voltage Directors only) 13.Dim Down (low voltage Directors only) 14.Cancel Job Information Type: Job Name: Cat. No.: Lamp(s): Notes: Lightolier a Genlyte company www.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. © 2006 Genlyte Group LLC • B1107
