Download Kapsys SmartVision Lite User Guide

The virtual keypad
To enter text into the input field, you can use the real keypad but also the virtual
keypad.
To access the virtual keypad, move your finger until you touch the input field, then
press "OK" key without removing your finger from the screen.
The virtual keypad appearance changes from numeric to alphabet to suit the content
of SmartVision’s input field.
Select the character to be entered by sliding your finger on the bottom virtual keypad,
and confirm the character by pressing the keypad "OK" key without removing your
finger from the screen.
If you want to enter a digit while only alphabetical characters are available, press the
“Symbol” key
at the bottom left of the virtual keypad, then to switch back to the
alphabet, press the “ABC” key
.
Pressing "Back"
will close the virtual keypad.
Please note: use the "C" key on the physical keypad to erase a typing mistake at
anytime.
SmartVision & SmartVision LITE – User Guide (Rev. 2.5 – version SW 1454)
21