Download JVC LPT0345-002B User's Manual

4 WATCH A RECORDED PROGRAM
* You can use both the buttons on the Remote and on the VCR.
1 Load a cassette with the label facing out and the window facing up.
2 Press REW or FF to find program start point.
3 Press PLAY to start playback.
FF (Fast-Forward)
PLAY
REW (Rewind)
CH 䊱䊲
POWER
VIDEO
(MONO)L–AUDIO–R
CH
SP/EP
TV/VCR
2
3
4
5
6
DBS
DAILY(M-F)
WEEKLY
7
8
9
C. RESET
AUX
CANCEL
0
START
STOP
REC
STOP/EJECT
TIMER
4
CH
DATE
P
TU
A
E
S
SY
MONO/Hi-Fi/SUPER VHS
VIDEO CASSETTE RECORDERS
* Please refer to the HR-VP68U’s instruction manual for more
detailed information.
A
OE
T
The Path To
Enjoyment
Starts Here.
REC
PAUSE
STOP/EJECT
Number
*
T
R E
A
ST ND US
AG
PAUSE
POWER
2
PLAY
SP/EP
POWER
1
1
2
CHECK
PACKAGE
CONTENTS
SITUATE AND
CONNECT
VCR
3
4
5
SET CLOCK
AND
TUNER
PLAY BACK
A
TAPE
RECORD
A
PROGRAM
CH +/–
EXPRESS PROGRAMMING
PROG
CHECK
PROG
REW (Rewind)
SP/EP
SKIP SEARCH
PLAY
FF
REW
REC
REC
STOP
P AU S
SP/EP
FF (Fast-Forward)
1
MAKE SURE THAT YOUR PACKAGE
CONTAINS:
E
RF CABLE (F-TYPE)
ENTER
/OSD
MENU
TV CH +
3 OK
PAUSE
STOP
VIDEO CASSETTE
RECORDER
SHUTTLE
PLUS
L
–
TV
1
2
3
4
5
6
7
8
9
2
0
4
1
CONTROLLER
O
VO
L
INFRARED
REMOTE
CONTROL
UNIT
“AA” BATTERY x 2
+
TV
1 Press REC to start recording.
2 Press REC to engage ITR. “0:30” appears on the front panel display.
3 To extend duration in increments of 30 minutes, press REC as many times as necessary.
MBR SET
A/B
TV/VCR A. MONITOR DISPLAY
1
* You can perform ITR only using the button on the VCR.
CABLE/
DBS
TV
* You can use both the buttons on the Remote and on the VCR.
b–INSTANT TIMER RECORDING
E
D
I
U
SP EP
VCR
a–BASIC RECORDING
To stop recording temporarily, press PAUSE. To resume recording, press PLAY.
To stop play, press STOP (Remote) or STOP/EJECT (VCR).
To eject the cassette, press STOP/EJECT (VCR) after stopping recording.
FF
MENU
5 RECORD A PROGRAM
Remote: Press CH + /– or press the appropriate Number keys.
VCR:
Press CH 5∞.
3 Press SP/EP to set the recording speed.
4 Start recording.
Remote: Press REC and PLAY together.
VCR:
Press REC.
I
U
Q
PLAY
OK
1 Load a cassette as above.
2 Select the recording channel.
CK
POWER
REW
To stop play, press STOP (Remote) or STOP/EJECT (VCR)
To eject the cassette, press STOP/EJECT (VCR) after stopping play.
Dear Customer,
Thank you for purchasing
this JVC Video Cassette
Recorder.
V
TV CH –
SP EP
VCR
3
SP
VCR
MULTI BRAND
REMOTE CONTROL UNIT
U
Printed in Malaysia
1199 IYV MW PJ
*
*
COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD.
LPT0345-002B
2
SITUATE AND CONNECT YOUR
NEW VCR
a–BASIC ANTENNA/CABLE CONNECTION
● If you’re using a Cable Box, . . .
. . . go to 2b (CATV CONVERTER
CONNECTION) .
● If you’re using an AV connection, . . .
. . . go to 2c (AUDIO/VIDEO
CONNECTIONS).
● If you’re using an RF connection only, . . .
. . . go directly to 3 (PLUG & PLAY).
surface.
2 Disconnect your antenna or cable line
from your TV.
3 Connect your antenna to your VCR.
4 Connect your VCR to your TV.
RF CONNECTION
COMBINED VHF/UHF
OUT
IN
Cable
Box
Back of VCR (example only)
Back of TV (example only)
ANT. IN
RF OUT
VHF/UHF
SEPARATE VHF/UHF
SET YOUR VCR'S CLOCK AND
TUNER
CATV Input
CATV Input
To TV
PLUG & PLAY
ANT. IN
TV
RF OUT
VCR
5 After completing the basic connections:
1 Place the VCR on a stable, horizontal
3
b–CATV CONVERTER CONNECTION
TV
ANT. IN
From
Cable
Box
The VCR’s clock and tuner channels are set automatically when the VCR is plugged into the AC
outlet.
If you use a cable box, Plug & Play will not function; set the clock and tuner channels separately.
(墌 pg.10 – 14 of the HR-VP68U’s instruction manual)
From VCR
RF OUT
To TV
VCR
With this connection you can view/record any
cable channel including scrambled channels to
which you have subscribed.
OUT
IN
Cable
Box
With this connection, you can view one
scrambled cable channel while recording
another unscrambled channel.
1
To watch TV with this type of connection
To watch TV with this type of connection
1 Press TV/VCR on the Remote so that the VCR
1 Press CH 5∞ (+/–) or Number keys to select
mode indicator lights on the front display
panel.
2 Tune TV to VCR output channel
(3, 4 or AV mode).
3 Tune VCR to Cable Box output channel.
4 Select desired channel on Cable Box.
•You can only view the channel you are
recording.
Plug the VCR into the
AC outlet.
desired channel for recording.
2 Press TV/VCR so that the VCR mode indicator
goes off from the front display panel.
3 Tune TV to Cable Box output channel.
4 Select desired channel on Cable Box.
2
• You cannot record scrambled channels.
• To play back a tape, you must tune the
Cable Box to the VCR output channel.
4
During Auto Channel Set, the channel numbers
are displayed as they are scanned and set.
Receivable channels are automatically stored
in memory in the order of their frequencies,
and non-receivable channels are skipped.
5
VHF ONLY
VHF
Do not press any buttons on the VCR or on the
Remote during Auto Setup.
c–AUDIO/VIDEO CONNECTIONS
UHF
UHF ONLY
VHF
UHF
CABLE TV LINE
Note:
Exact connector positions and names may differ.
● CONNECTORS WHICH ARE OR MAY BE REQUIRED:
䡲 RF Cable
䡲 Antenna Splitter
䡲 300-75 ohm Matching
Transformer
䡲 VHF/UHF Antenna Mixer
䡲 Antenna Splitter
AV connection methods differ from one type
of VCR to another. First, for any TV and VCR,
connect your VCR to your TV using RF
connection. Then make AV connections
following one of the methods illustrated here.
After making the connections, go to 3 (PLUG
& PLAY).
3
Hi-Fi VHS VCR 佡 AV STEREO TV
VIDEO OUT
VIDEO IN
L
AUDIO OUT
R
L
AUDIO IN
R
SUPER VHS VCR 佡 AV STEREO TV WITH S-VIDEO
INPUT TERMINALS
MONAURAL VHS VCR 佡 AV TV
S-VIDEO OUT
S-VIDEO IN
VIDEO OUT
VIDEO IN
VIDEO OUT
VIDEO IN
AUDIO OUT
AUDIO IN
L
AUDIO OUT
R
L
AUDIO IN
R
To Listen To VCR Sound Through A
Component Stereo Audio System,
Connect As Shown
VCR
VIDEO OUT
L
AUDIO OUT
R
TV
Monaural deck owners:
Connect to VCR's AUDIO
OUT
AMP
When setting is complete, the VCR displays the
current clock time. You can now use your
VCR.
“AUTO” blinks while the VCR automatically
sets the clock using information provided by
the local PBS channel.
NOTES:
● If the clock time displayed in 5 is incorrect, perform the Semiauto or Manual Clock Set
procedure (refer to page 11 or 12 of the HR-VP68U’s instruction manual). Auto Channel Set has
already taken place, and is not affected.
● There are some PBS channels that do not transmit clock setting data. If your antenna cable is
properly connected and “– – : – –” is displayed, perform the Manual Clock Set procedure (refer
to page 12 of the HR-VP68U’s instruction manual). Auto channel setting has not yet taken place,
so perform the Auto Channel Set procedure (refer to page 13 of the HR-VP68U’s instruction
manual).