Download JVC IYV*MW*BJ User's Manual

4 WATCH A RECORDED PROGRAM
* You can use both the buttons on the Remote and on the VCR.
1 Load a cassette with the label facing out and the window facing up.
2 Press REW or FF to find program start point.
3 Press PLAY to start playback.
To stop play, press STOP (Remote) or STOP/EJECT (VCR)
To eject the cassette, press STOP/EJECT (VCR) after stopping play.
FF (Fast-Forward)
PLAY
REW (Rewind)
CH 䊱䊲
POWER
AUDIO
To stop recording temporarily, press PAUSE. To resume recording, press PLAY.
To stop play, press STOP (Remote) or STOP/EJECT (VCR).
To eject the cassette, press STOP/EJECT (VCR) after stopping recording.
CH
SP/EP
SP/EP
REC
STOP/EJECT
REC
PAUSE
P
TU
A
E
S
SY
A
OE
T
AG
The Path To
Enjoyment
Starts Here.
PAUSE
TV operation n Press and hold
TV button, then press POWER,
TV CH+s–, VOO+ / –VTV / VCR
POWER
POWER
TV/VCR A. MONITOR DISPLAY
TV/VCR
1
2
4
PLAY
3
2
Number
5
6
DAILY(M-F)
WEEKLY
7
8
9
C. RESET
AUX
CANCEL
0
START
STOP
TIMER
DATE
CH
4
MONO/Hi-Fi/SUPER VHS
VIDEO CASSETTE RECORDERS
* Please refer to the HR-VP48U’s instruction manual for more
detailed information.
STOP/EJECT
CHECK
PACKAGE
CONTENTS
1
2
SITUATE AND
CONNECT
VCR
3
4
5
SET CLOCK
AND
TUNER
PLAY BACK
A
TAPE
RECORD
A
PROGRAM
CH +/–
EXPRESS PROGRAMMING
1
PROG.
PROG.
CHECK
REW (Rewind)
SP/EP
SKIP
SEARCH
PLAY
FF
REW
b–INSTANT TIMER RECORDING
E
D
I
U
SP EP
VCR
OK
TV
Remote: Press CH + /– or press the appropriate Number keys then press ENTER.
VCR:
Press CH 5∞.
3 Press SP/EP to set the recording speed.
4 Start recording.
Remote: Press REC and PLAY together.
VCR:
Press REC.
FF
MENU
VIDEO
a–BASIC RECORDING
1 Load a cassette as above.
2 Select the recording channel.
I
U
Q
POWER
5 RECORD A PROGRAM
* You can use both the buttons on the Remote and on the VCR.
CK
PLAY
REW
*
T
R E
A
ST ND US
Dear Customer,
Thank you for purchasing
this JVC Video Cassette
Recorder.
REC
STOP
REC
SP/EP
FF (Fast-Forward)
MAKE SURE THAT YOUR PACKAGE
CONTAINS:
1
PAUS
E
INFRARED
REMOTE
CONTROL
UNIT
ENTER
/OSD
PAUSE
TV CH +
ENTER
VIDEO CASSETTE
RECORDER
L
VO
L
+
SHUTTLE
PLUS
TV
1 Press REC to start recording.
2 Press REC to engage ITR. “0:30” appears on the front panel display.
3 To extend duration in increments of 30 minutes, press REC as many times as necessary.
STOP
RF CABLE (F-TYPE)
O
* You can perform ITR only using the button on the VCR.
3 OK
MENU
–
TV C H –
TV
V
“AA” BATTERY x 2
PLAY
1
2
3
4
5
6
7
8
9
0
2
4
1
3
POWER
REW
FF
MENU
LP20878-001
VIDEO
AUDIO
SP EP
VCR
CH
OK
SP/EP
REC
STOP/EJECT
PAUSE
VCR/TV
SP
VCR
U
Printed in China
1199 IYV MW BJ
*
*
COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD.
LPT0340-002A
2
SITUATE AND CONNECT YOUR
NEW VCR
a–BASIC ANTENNA/CABLE CONNECTION
● If you’re using a Cable Box, . . .
. . . go to 2b (CATV CONVERTER
CONNECTION) .
● If you’re using an AV connection, . . .
. . . go to 2c (AUDIO/VIDEO
CONNECTIONS).
● If you’re using an RF connection only, . . .
. . . go directly to 3 (PLUG & PLAY).
surface.
2 Disconnect your antenna or cable line
from your TV.
3 Connect your antenna to your VCR.
4 Connect your VCR to your TV.
RF CONNECTION
COMBINED VHF/UHF
OUT
IN
Cable
Box
Back of VCR (example only)
Back of TV (example only)
ANT. IN
RF OUT
VHF/UHF
SEPARATE VHF/UHF
SET YOUR VCR'S CLOCK AND
TUNER
CATV Input
CATV Input
To TV
PLUG & PLAY
ANT. IN
TV
RF OUT
VCR
5 After completing the basic connections:
1 Place the VCR on a stable, horizontal
3
b–CATV CONVERTER CONNECTION
TV
ANT. IN
From
Cable
Box
The VCR’s clock and tuner channels are set automatically when the VCR is plugged into the AC
outlet.
If you use a cable box, Plug & Play will not function; set the clock and tuner channels separately.
(墌 pg.10 – 14 of the HR-VP48U’s instruction manual)
From VCR
RF OUT
To TV
VCR
With this connection you can view/record any
cable channel including scrambled channels to
which you have subscribed.
OUT
IN
Cable
Box
With this connection, you can view one
scrambled cable channel while recording
another unscrambled channel.
1
To watch TV with this type of connection
To watch TV with this type of connection
1 Press TV/VCR on the Remote so that the VCR
1 Press CH 5∞ (+/–) or Number keys to select
mode indicator lights on the front display
panel.
2 Tune TV to VCR output channel
(3, 4 or AV mode).
3 Tune VCR to Cable Box output channel.
4 Select desired channel on Cable Box.
•You can only view the channel you are
recording.
Plug the VCR into the
AC outlet.
desired channel for recording.
2 Press TV/VCR so that the VCR mode indicator
goes off from the front display panel.
3 Tune TV to Cable Box output channel.
4 Select desired channel on Cable Box.
2
• You cannot record scrambled channels.
• To play back a tape, you must tune the
Cable Box to the VCR output channel.
4
During Auto Channel Set, the channel numbers
are displayed as they are scanned and set.
Receivable channels are automatically stored
in memory in the order of their frequencies,
and non-receivable channels are skipped.
5
VHF ONLY
VHF
Do not press any buttons on the VCR or on the
Remote during Auto Setup.
c–AUDIO/VIDEO CONNECTIONS
UHF
UHF ONLY
VHF
UHF
CABLE TV LINE
Note:
Exact connector positions and names may differ.
● CONNECTORS WHICH ARE OR MAY BE REQUIRED:
䡲 RF Cable
䡲 Antenna Splitter
䡲 300-75 ohm Matching
Transformer
䡲 VHF/UHF Antenna Mixer
䡲 Antenna Splitter
AV connection methods differ from one type
of VCR to another. First, for any TV and VCR,
connect your VCR to your TV using RF
connection. Then make AV connections
following one of the methods illustrated here.
After making the connections, go to 3 (PLUG
& PLAY).
3
Hi-Fi VHS VCR 佡 AV STEREO TV
VIDEO OUT
VIDEO IN
L
AUDIO OUT
R
L
AUDIO IN
R
SUPER VHS VCR 佡 AV STEREO TV WITH S-VIDEO
INPUT TERMINALS
MONAURAL VHS VCR 佡 AV TV
S-VIDEO OUT
S-VIDEO IN
VIDEO OUT
VIDEO IN
VIDEO OUT
VIDEO IN
AUDIO OUT
AUDIO IN
L
AUDIO OUT
R
L
AUDIO IN
R
To Listen To VCR Sound Through A
Component Stereo Audio System,
Connect As Shown
VCR
VIDEO OUT
L
AUDIO OUT
R
TV
Monaural deck owners:
Connect to VCR's AUDIO
OUT
AMP
When setting is complete, the VCR displays the
current clock time. You can now use your
VCR.
“AUTO” blinks while the VCR automatically
sets the clock using information provided by
the local PBS channel.
NOTES:
● If the clock time displayed in 5 is incorrect, perform the Semiauto or Manual Clock Set
procedure (refer to page 11 or 12 of the HR-VP48U’s instruction manual). Auto Channel Set has
already taken place, and is not affected.
● There are some PBS channels that do not transmit clock setting data. If your antenna cable is
properly connected and “– – : – –” is displayed, perform the Manual Clock Set procedure (refer
to page 12 of the HR-VP48U’s instruction manual). Auto channel setting has not yet taken place,
so perform the Auto Channel Set procedure (refer to page 13 of the HR-VP48U’s instruction
manual).