Transcript
Technical Manual SUB135P JBL Cinema ProPack™ 600II ACOUSTIC & ELECTRICAL SPECIFICATIONS: AURAL SWEEP TEST SPECIFICATIONS: • Nominal Impedance • Max Amp Power • Frequency Response • System Aural Sweep Test 4 ohms 100 watts* 35Hz – 2.5kHz (–10dB) PHYSICAL SPECIFICATIONS: SYSTEM COMPONENTS: • Cabinet SUB135P (not for sale) • Low-Frequency Transducer 8" (203mm) cone (20MF10DAG-DW03) DC Resistance 3.4 ohms ±10% • Enclosure Dimensions (H x W x D) 15" x 13" x 14" 381mm x 330mm x 356mm • Weight 30 lb/13.6kg WARRANTY: EXPLODED VIEW 1 6.0V Input 35Hz to 2.5kHz • Refer to Warranty Statement packed with each product. 7 * The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks. We do not recommend sustained operation at these maximum power levels. 10 4 8 3 SUB135P JBL Cinema ProPack™ 600II SUB135P Schematic +IN RED 205 + INPUT 7 5 Item 1 2 3 4 5 6 7 8 9 10 11 –IN L.F. BLACK 205 – 6 Part No. Description Not for Sale Not for Sale 20MF10DAG-DW03 700bp-x wi5447 wi5448 06-t4205012 06-t5345005 wp5266 t5015 ai5193 Cabinet Port tube 8" Woofer Plastic terminal black Main plastic foot Rubber pad for foot Screw black t4*20 Screw t5*34 Foam for SUB135P Binding post (set) Owner’s manual Pcs. Woofer and terminal cup Feet JBL Cinema ProPack 600II 1 1 1 1 4 4 14 4 1pr. 1 Note: Package is not shown because it is part of the JBL Cinema ProPack 600II system. JBL Consumer Products, 250 Crossways Park Drive, Woodbury, New York 11797 09/02