Download Icom IC-F3061S User's Manual

SECTION 3
DISASSEMBLY INSTRUCTIONS
• REMOVING THE CHASSIS UNIT
1 Unscrew 1 nut A, and remove 2 knobs B and C.
2 Unscrew 2 screws D.
3 Take off the chassis unit in the direction of the arrow.
4 Disconnect the flat cable E form J501.
5 Remove the seal F.
6 Unscrew 2 nuts G and remove the plate H.
chassis.
B
RF unit
D
F
Chassis unit
• REMOVING THE RF UNIT
1 Unsolder 3 points A.
2 Unscrew 4 screws B and remove the RF unit from the
A
G
A
H
A
B
C
J501
E
• REMOVING THE MAIN UNIT
1 Unsolder 1 point A.
2 Unscrew 1 screw B and remove the VR unit.
3 Unsolder 5 points C and remove the shield plate D.
4 Unsolder 10 points E.
5 Unscrew 7 screws F and remove the MAIN unit from the
• REMOVING THE FRONT UNIT
1 Disconnect the flat cable A from J503.
2 Unsolder 2 points B.
3 Unscrew 6 screws C and remove the plate D and FRONT
unit.
chassis.
B
B
VR unit
C
A
5
C
A
C
D
J503
FRONT unit
F
F
E
10
MAIN unit
F
C
C
D
3-1