Download Hunter Engineering Model PE Brochure
Transcript
Pit Racks For Passenger Cars and Light Trucks 4 “Walk-around” pit layout saves time spent raising and lowering a lift 4 Wide coverage with 18,000-lb. (8165 kg) capacity and 22 1/2” (572 mm) runway width 4 Two available runway lengths: 223- and 255-inch Specifications Model Length Description P441-IS P441J P444-IS P444J 223” ( 5664 mm) 223” ( 5664 mm) 255” ( 6477 mm) 255” ( 6477 mm) w/ Inflation Station and (2) 9,000 lb. swing jacks w/ (2) 9,000 lb. jacks w/ Inflation Station and (2) 9,000 lb. swing jacks w/ (2) 9,000 lb. jacks All models have 50 mm turnplate pockets and 4-wheel align WB 88”–158” Standard Optional Swing Air-Jack, 133–83–1 9,000 lb. (4082 kg) Capacity Integrated Inflation Reels (-IS models) Automatically fills or bleeds each tire. Air Line Kit Provides an air source at the front and rear for jacks and air tools. Stainless Steel Turnplate, 25–129–1 14”, 356 mm (2 required) 20-2076-1 PowerSlide turnplates 20-2114-1 50 mm stainless 20-2113-1 50 mm low friction stainless Site Requirements* 331” (8407 mm) or 364” (9245 mm) For complete site requirements see 6114-T Inside Pit Minimum Recommended For P441 blueprint order 6120-T WORK AREA Walkaround 183” (4648 mm) Inside Pit Minimum Recommended * 36” Deep (914 mm) or 30” Deep (762 mm) or 24” Deep (610 mm) For P444 blueprint order 6121-T Center Pit 63”– 66” Deep (1600 mm – 1676 mm) 85” (2159 mm) 40” (1016 mm) * When ordering, 36” deep work area is standard. See blueprint for parts to order when selecting 24” or 30” work area. 223” (5664 mm) or 255” (6477 mm) w w w. h u n t e r. c o m 0910CHE Copyright © 2010, Hunter Engineering Company Form 4802-T, 09/10 Supersedes Form 4802-T, 09/06