Download HP NAS 8000 Non-Clustered Solution Command Reference Guide

Storage Settings
Storage settings allow you to control Direct Access Storage Devices (DASDs) connected to the HP
NAS 8000 solution. DASDs include disk drives and storage arrays.
getStorageDasdList
Returns a list of Direct Access Storage Devices attached to the HP NAS 8000 system.
■
outParam[0:N] = DASD name list
getStorageDasdType
Returns the DASD type of the specified device.
■
inParam[0] = DASD name
■
outParam[0] = DASD type
Where DASD type can be one of:
■
Va71xx = HP VA71xx storage array
■
Va74xx = HP VA74xx storage array
■
GenericScsi = Any other SCSI disk or array
getStorageDasdSerialNumber
Returns the serial number of the specified storage device.
■
inParam[0] = DASD name
■
outParam[0] = DASD serial number
getStorageDasdVendor
Returns the vendor name of the specified DASD (as returned by SCSI inquiry).
■
inParam[0] = DASD name
■
outParam[0] = DASD vendor
getStorageDasdProduct
Returns the product IS of the specified DASD (as returned by SCSI inquiry).
■
inParam[0] = DASD name
■
outParam[0] = DASD product
getStorageDasdSerialNumber
Returns the serial number of the specified DASD.
■
inParam[0] = DASD name
■
outParam[0] = DASD serial number
Command Reference
19