Download HP mt40 Deployment Guide

Using the Management Application
Configuration option
Description
Burst Loss Protection
Set BLP to protect against correlated loss in the network.
Configuration
Available values are:
• Off: Disables BLP for correlated loss.
• On: Enables BLP for correlated loss.
• Auto: Allows HP Velocity to determine if BLP is required and
automatically turn the feature on if required. Auto is the default value.
NOTE: BLP might degrade performance for highly latency-sensitive
applications.
BLP Buffer
Set the amount of packet buffering in milliseconds that HP Velocity is
allowed to use when protecting against bursty or correlated loss.
Available values range from 10 to 100 ms in increments of 10 ms. The
default value is 20 ms.
Configuring LiveTCP - Latency Mitigation
HP Velocity LiveTCP - Latency Mitigation optimizes TCP throughput and provides latency
mitigation for RDP, RGS, and ICA protocols. Table 23 describes the configurable latency
mitigation parameters.
Figure 31. LiveTCP - Latency Mitigation configuration dialog
HP Velocity Server Side Deployment Guide
69