1
Download HP Big Data Getting Started Guide
Transcript
Figure 3 IP addresses NOTE: There are two HP 40GbE QSFP+ ports per switch. Each 40 GbE QSFP+ port is convertible to 10GbE SFP+ with an adapter. Two adapters are provided with each rack. In addition, there are thirty 1GbE/10GbE RJ45 ports per switch. There are two Ethernet switches, each switch with fourteen available ports, for a total of fifty-six available 10Gb/1Gb ports on both switches. There are also two 40Gb ports on each switch. TIP: HP recommends assigning Ethernet ports beginning at port 44 and working backward, ending at port 17. Available ports are shown in “Ethernet ports” (page 8). Figure 4 Ethernet ports 8 The HP CS300 Vertica appliance
