Download Honeywell DC300K-E User's Manual
Transcript
51-52-03-07 Page 9 General Reference Data Data Isolation (Functional) AC Power : is electrically isolated from all other inputs and outputs to withstand a HIPOT potential of 1900Vdc for 2 seconds per Annex K of EN61010-1. Analog Inputs and Outputs: are isolated from each other and all other circuits at 850Vdc for 2 seconds. Digital Input and Digital Output: are isolated from all other circuits at 850Vdc for 2 seconds. Relay Contacts: with a working of 115/230 Vac, isolated from each other and all other circuits at 345 Vdc for 2 seconds. Surge Withstand Capability (SWC) Immunity: ANSI/IEEE C37.90.1, Surge Withstand Capability (SWC) (Formerly IEEE 472) Mains power input and relay contact outputs: 2.5 kV, Common Mode and Differential Mode. All other circuits: 1.0 kV, Common Mode and Differential Mode. Radio Frequency Immunity: No effect on performance from a 5 W walkie-talkie operated at 27, 151 or 450 MHz, one Interference (RFI) meter from the controller. Model Number Interpretation Key Number Table 1 Table 2 Table 3 Table 4 Table 5 D C 3 0 0 Output #1 C = Current 4 – 20mA without Alarms K = Current 4 – 20mA with Alarm 1 E = Relay, Electromechanical – 5AMP with Alarm 1 A = Relay, Solid State AC – 1AMP with Alarm 1 T = Open Collector Output – 20mA with 1 Alarm Output #2 or Alarm #2 O = None E = Relay, Electromechanical – 5AMP (SPDT) A = Relay, Solid State AC – 1AMP (SPST) T = Open Collector Output – 20mA External Interface O – – = None 1 – – = RS422/485 2 – – = Auxiliary Output 4 – – = DMCS Software Options – O – = None – A – = Accutune – B – = Setpoint Program and Accutune Digital Inputs – – O = None – – 3 = Digital Inputs (2) 0 Options 0 – – – = 90-264Vac Power 1 – – – = 24Vac/dc Power B – – – = Blue Bezel with 90-264Vac Power T – – – = Tan Bezel with 90-264 Vac Power C – – – = Blue Bezel with 24Vac/dc Power D – – – = Tan Bezel with 24Vac/dc Power – 0– – = None – A – – = Approvals CSA,FM,UL – F – – = Approvals - FM, CSA – – 0– = None – – T – = Customer I.D. Tag – – – 0 = None – – – D = DIN Cutout Adapter Optional Input – 0 = None – 1 = 4–20mA or 1–5V – 2 = Slidewire Input for Position Proportional or 3 Position Step with motor position indication PV Input 1 – = T/C, RTD, mV, 1–5V 2 – = T/C, RTD, mV, 1–5V, 4–20mA 3 – = T/C, RTD, mV, 1–5V, 4–20mA,0–10V 22603 Figure 4 - Model Number Interpretation