1
Download Graco 333347F User's Manual
Transcript
Troubleshooting Problem Cause Solution Static shock when touching shaker or adhesive bin. Ground wire not in place on shaker assembly. Some adhesives, flow rates, and ambient conditions can cause excessive static buildup on the shaker tube. Attach a ground wire from the shaft of the shaker unit to a true earth ground. Order shaker grounding kit 24R708. Adhesive not dispensing at the correct time. Dispense modules opening at the wrong time. InvisiPac system does not control the opening and closing of the applicators. The separate controller needs to be adjusted. Consult pattern control manufacturer or qualified electrician. Pump and vacuum feed system cycle on and off before temperature setpoint is achieved. Solenoid connector is installed into the light tower plug on the MZLP daughter board Move solenoid connector from J12 (light tower) to J13 (solenoid valves) on the daughter board on the MZLP. 333347F 53
