1
Download Graco 332918D User's Manual
Transcript
Parts 695 / 795 / 1095 / 1595 / Mark IV / Mark V / Mark X Electric Airless Sprayers 332918D EN For Portable Airless Spraying of Architectural Coatings and Paints. For professional use only. Not approved for use in European explosive atmosphere locations. 3300 psi (227 bar, 22.7 MPa) Maximum Working Pressure Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. Related Manuals: 332916 309495 308491 311861 311254 333028 332922 Standard Hi-Boy Series Standard Lo-Boy Series ProContractor Series IronMan Series ti22882a Models Models 695/795/1095/1595 UltraMax II, Standard, ProContractor, IronMan Models Model Number Model Voltage Standard Hi-Boy 16W892 695 120 ✓ 16W893 695 120 16W894 695 120 826177 695 120 826178 695 120 826179 695 120 16W895 795 120 16W896 795 120 826180 795 120 826181 795 120 16W899 1095 120 16W900 1095 120 16W901 1095 120 826182 1095 120 826183 1095 120 826184 1095 120 16W902 1595 120 16W903 1595 120 16W907 1595 120 16W936 1595 120 16W937 1595 120 16W938 1595 120 826185 1595 120 826186 1595 120 826187 1595 120 826188 1595 120 826189 1595 120 826190 1595 120 Standard Lo-Boy ProContractor IronMan ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Mark IV / Mark V / Mark X Standard, ProContractor, IronMan Models 2 Pro Standard IronMan Voltage Contractor Series Series Series Model Number Model 16W897 Mark IV 120 16W898 Mark IV 120 16W905 Mark V 120 16W906 Mark V 120 16W939 Mark V 120 16W940 Mark V 120 16X947 Mark V 120 16W908 Mark X 230 16X099 Mark X 230 ✓ Flex Plus Gun Blue Texture Gun HD Inline Texture Gun ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ 3/8 in. x 100 ft 1/2 in. x 50 ft + 1/2 in. x 100 ft + 1/4 in. x 3 ft 3/8 in. x 12 ft + 3/8 in. x 12 ft whip whip whip (9.5mm x 30m (12.7mm x 15m (12.7mm x 30m + 6.4mm x + 9.5mm x + 9.5mm x 3.7m whip) 0.9m whip) 3.7m whip) ✓ ✓ ✓ ✓ 3/8 in. x 50ft + 1/4 in. x 3 ft whip (9.5mm x 15m + 6.4mm x 0.9m whip) ✓ ✓ ✓ 332918D Models Table of Contents Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 695 Lo-Boy Standard . . . . . . . . . . . . . . . . . . . . . . . . 4 695 Lo-Boy Standard Parts List . . . . . . . . . . . . . 5 695/795/Mark IV Hi-Boy Standard . . . . . . . . . . . . . . 6 695/795/Mark IV Hi-Boy Standard Parts List . . . . 7 1095/1595/Mark V Hi-Boy Standard . . . . . . . . . . . . 8 1095/1595/Mark V Hi-Boy Standard . . . . . . . . . . 9 Mark X Standard . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Mark X Standard Parts List . . . . . . . . . . . . . . . . 11 695/795/MARK IV ProContractor . . . . . . . . . . . . . 12 695/795/MARK IV ProContractor Parts List . . . 13 1095/1595/MARK V ProContractor . . . . . . . . . . . . 14 1095/1595/MARK V ProContractor Parts List . . 15 332918D Mark X ProContractor . . . . . . . . . . . . . . . . . . . . . . 16 Mark X ProContractor . . . . . . . . . . . . . . . . . . . . 17 1095/1595/Mark V IronMan . . . . . . . . . . . . . . . . . . 18 1095/1595/Mark V IronMan . . . . . . . . . . . . . . . . 19 Hose Reel and Gun . . . . . . . . . . . . . . . . . . . . . . . . 20 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Control Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Graco Standard Warranty . . . . . . . . . . . . . . . . . . . 24 3 695 Lo-Boy Standard 695 Lo-Boy Standard 1 124 58 Ref. 123 72 160 159 36 126 Torque 1 40-45 in-lb (4.5 - 5.0 N•m) 2 9-11 in-lb (1.0 - 1.2 N•m) 3 200-230 in-lb (22.6 - 25.9 N•m) 4 190-210 in-lb (21.4 - 23.7 N•m) 5 22-28 in-lb (2.4 - 3.1 N•m) 6 25-30 ft-lb (33.8 - 40.6 N•m) 7 70-80 ft-lb (94.9 - 108.4 N•m) 8 130-150 in-lb (14.6 - 16.9 N•m) 89 90a 2 127 84 90 4 6 37 3 110 51 28 30 71 28 5 18 31 1 85 44 106 99 11 43 12 8 107 11 14 6 105 94 24 3 8 83 7 56 41 117 108 31 1 91 62 10 22 17 109 138 139 141 93 6 77 140 129 See pages 21 and 22. 154 76 76 48 93 87 ti22891a 4 332918D 695 Lo-Boy Standard 695 Lo-Boy Standard Parts List Ref. 6 8 10 11* 12 14 17 18 22 24 28 30 31 36 37 41 43 44 48 51 Part 15C753 15E891 156306 119420 106115 110141 15C871 109032 116038 111040 114672 114699 118444 116191 100057 196178 176817 176818 189920 24V023 56 58 192723 287281 62 71 24P665 16X364 16X786 72 76 16X365 16X787 248216 77 83 15D000 24V026 84 257185 332918D Description Qty. SCREW, mach, torx, hex 5 CLIP, retaining 2 WASHER, flat 2 WHEEL, pneumatic 2 WASH, lock, spring 4 SCREW, cap, socket hd 4 CAP, leg 2 SCREW, mach, pnh 4 WASHER, wave spring 2 NUT, hex, flanged 4 WASHER, thrust 2 WASHER, thrust 1 SCREW, machine, hex washer hd 6 WASHER, thrust 1 SCREW, cap, hex hd 4 FITTING 1 SPRING, retaining 1 PIN, str, hdls 1 STRAINER, (1-11 1/2 NPSM) 1 COVER, drive, plastic, painted; 1 includes 31 NUT, retaining 1 1 695 SHIELD, motor, painted; includes 123, 124 FRAME, cart 1 LABEL 1 Ultra 695 Ultimate 695 LABEL 1 Ultra 695 Ultimate 695 HOSE, suction; 1 includes 109, 138, 139, 140, 141 CLIP, drain line 1 HOUSING, bearing; 1 includes 12, 14, 31, 108, 117 MOTOR, electric; includes 126, 127 1 Ref. 85 87 89 Part 241008 241920 287289 90 287283 90a 91 93 94 99 105 106 107 108 109 110 117 123 124 126 127 128▲ 129 107089 16Y598 248217 16X904 24A249 276975 15F952 114423 16X770 115099 16X983 187437 276980 119250 15D088 115477 222385 138 139 140 141 154 240794 826079 117559 118505 15C980 15C981 288420 159 160 278075 15Y118 Description ROD, connecting; includes 43 DEFLECTOR, threaded GEAR, combination; includes 28, 30 HOUSING, drive, M1; includes 6, 36, 90a WASHER, race, thrust PUMP, displacement 695/795 HOSE, drain; includes 87 HOSE, coupled, 1/4 x 15.75 HANDLE, cart CUP, drain BRACKET, drain cup SCREW, mach, hex hd SHIELD, pump rod WASHER, garden hose LABEL, Standard Series LABEL, torque GROMMET, cover SCREW, shoulder, hex washer FAN, motor SCREW, mach, torx, pan hd TAG, WARNING (not shown) HOSE, cpld, 1/4 in. x 50 ft Ultra Ultimate O-RING RING, retaining, external NUT, jam WASHER, suction swivel GUN, contractor Manual 311861 BAFFLE LABEL, Made in USA Qty. 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 2 1 1 1 1 2 1 1 1 1 1 1 * 253132 KIT, repair, tube, 11 in. ▲Extra Danger & Warning tags & labels available free. 5 695/795/Mark IV Hi-Boy Standard 695/795/Mark IV Hi-Boy Standard 58 Ref. 72 160 159 124 1 84 123 36 126 2 90a 90 127 4 Torque 1 40-45 in-lb (4.5 - 5.0 N•m) 2 9-11 in-lb (1.0 - 1.2 N•m) 3 200-230 in-lb (22.6 - 25.9 N•m) 4 190-210 in-lb (21.4 - 23.7 N•m) 5 22-28 in-lb (2.4 - 3.1 N•m) 6 25-30 ft-lb (33.8 - 40.6 N•m) 7 70-80 ft-lb (94.9 - 108.4 N•m) 8 130-150 in-lb (14.6 - 16.9 N•m) 6 3 37 51 110 31 1 28 99 71 89 28 106 106 30 85 5 3 24 18 12 117 105 31 1 44 14 83 6 62 77 43 55 7 56 107 108 8 94 31 1 91 41 91 Mark IV 11 109 6 76 24 3 8 93 10 17 22 87 48 154 166 129 154 165 164 See pages 21 and 22. Mark IV 129 163 93 695/795 ti22892a 6 332918D 695/795/Mark IV Hi-Boy Standard 695/795/Mark IV Hi-Boy Standard Parts List Ref. 6 8 10 11* 12 14 17 18 22 24 28 30 31 36 37 41 43 44 48 51 Part 15C753 15E891 156306 119420 106115 110141 15C871 109032 116038 111040 114672 114699 118444 116191 100057 196178 176817 176818 189920 24V023 55 56 58 16C457 192723 62 71 287281 287282 24P666 16X364 16X367 16X786 16X788 16X357 72 76 77 83 16X365 16X366 16X787 16X789 17A135 248214 278204 24V026 84 85 87 257185 257186 241008 241920 332918D Description Qty. SCREW, mach, torx, hex 5 CLIP, retaining 2 WASHER, flat 2 WHEEL, pneumatic 2 WASH, lock, spring 4 SCREW, cap, socket hd 4 CAP, leg 2 SCREW, mach, pnh 4 WASHER, wave spring 2 NUT, hex, flanged 6 WASHER, thrust 2 WASHER, thrust 1 SCREW, machine, hex washer hd 6 WASHER, thrust 1 SCREW, cap, hex hd 4 FITTING 1 SPRING, retaining 1 PIN, str, hdls 1 STRAINER, (1-11 1/2 NPSM) 1 COVER, drive, plastic, painted; 1 includes 31 HANGER, pail 1 NUT, retaining 1 SHIELD, motor, painted; 1 includes 123, 124 695 795/Mark IV FRAME, cart 1 LABEL 1 Ultra 695 Ultra 795 Ultimate 695 Ultimate 795 TexSpray Mark IV LABEL 1 Ultra 695 Ultra 795 Ultimate 695 Ultimate 795 TexSpray Mark IV TUBE, intake; includes 109 1 CLIP, spring 1 HOUSING, bearing; includes 12, 14, 1 24, 31, 55, 77, 108, 117 1 MOTOR, electric; includes 106, 127 695 795/Mark IV ROD, connecting; includes 43 1 DEFLECTOR, threaded 1 Ref. 89 Part Description 287289 GEAR, combination; includes 28, 30 90 HOUSING, drive, M1; includes 6, 36, 90a 287283 695 287284 795/Mark IV 90a 107089 WASHER, race, thrust 91 PUMP, displacement; includes 41, 109 16Y598 695/795 16X428 Mark IV 93 244240 HOSE, coupled; includes 87 94 16X904 HOSE, coupled, 1/4 x 15.75 99 287489 HANDLE, cart 105 16X695 HANGER, stand, cart 106 15C982 CAM, cart 107 114531 SCREW, mach, hex washer 108 16X770 SHIELD, pump rod 109 118494 PACKING, o-ring 110 16X983 LABEL, Standard Series 117 187437 LABEL, torque 123 276980 GROMMET, cover 124 119250 SCREW, shoulder, hex, washer 126 15D088 FAN, motor 127 115477 SCREW, mach, torx, pan, hd 128▲ 222385 TAG, WARNING (not shown) 129 HOSE, cpld 240794 695/795 Ultra 826079 695/795 Ultimate 240797 Mark IV 154 GUN, contractor 288420 695/795 246468 Mark IV 159 278075 BAFFLE 160 15Y118 LABEL, Made in USA 163 241735 HOSE, coupled, 1/4 in. x 3 ft 164 159841 BUSHING, 3/8 in. x 1/4 in. 165 189018 SWIVEL, assembly 166 246215 GUARD, RAC X Qty. 1 1 1 1 1 1 1 1 2 4 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 ▲ Extra Danger and Warning tags and labels available free. * 253132 KIT, repair, tube 7 1095/1595/Mark V Hi-Boy Standard 1095/1595/Mark V Hi-Boy Standard 58 Ref. 72 1 124 123 1 40-45 in-lb (4.5 - 5.0 N•m) 2 9-11 in-lb (1.0 - 1.2 N•m) 3 200-230 in-lb (22.6 - 25.9 N•m) 4 190-210 in-lb (21.4 - 23.7 N•m) 5 22-28 in-lb (2.4 - 3.1 N•m) 6 25-30 ft-lb (33.8 - 40.6 N•m) 7 70-80 ft-lb (94.9 - 108.4 N•m) 8 130-150 in-lb (14.6 - 16.9 N•m) 160 159 84 99 89 36 126 127 2 90a 28 Torque 90 6 4 5 18 8 107 37 110 3 85 30 106 51 28 3 24 1 7 113 105 31 43 1 23 56 31 44 71 83 12 6 14 62 77 108 117 11 1 94 10 31 19 24 3 55 22 41 Mark V 91 91 8 17 109 93 6 76 Mark V 1095/1595 48 87 164 154 129 See pages 21 and 22. 93 129 163 154 165 ti22893a 8 332918D 1095/1595/Mark V Hi-Boy Standard 1095/1595/Mark V Hi-Boy Standard Ref. 6 8 10 11* 12 14 17 18 19 22 23 24 28 30 31 36 37 41 Part 15C753 15E891 156306 119509 106115 114666 276974 108795 102982 116038 117791 111040 114672 114699 118444 116192 100057 43 44 48 51 196178 16X834 119778 183210 189920 24V024 55 56 58 16C457 193031 287282 62 71 24P667 16X368 16X371 16X790 16X792 16X360 72 76 77 83 16X369 16X370 16X791 16X793 16X361 248215 278204 24V027 84 257187 257188 332918D Description Qty. SCREW, mach, torx, hex 5 CLIP, retaining 2 WASHER, flat 2 WHEEL, pneumatic 2 WASH, lock, spring 4 SCREW, cap, socket hd 4 CAP, leg 2 SCREW, mach, pnh 4 PACKING, o-ring (Mark V) 1 WASHER, wave spring 2 SCREW, cap, flng hd 2 NUT, hex, flanged 6 WASHER, thrust 2 WASHER, thrust 1 SCREW, machine, hex washer hd 8 WASHER, thrust 1 SCREW, cap, hex hd 4 FITTING, pump, quick disc 1 1095/1595 Mark V SPRING, retaining 1 PIN, pump 1 STRAINER, (1-11 1/2 NPSM) 1 COVER, drive, plastic, painted; 1 includes 31 HANGER, pail 1 NUT, retaining 1 1 SHIELD, motor, painted; includes 123, 124 FRAME, cart 1095/1595 1 LABEL, UltraMax 1 Ultra 1095 Ultra 1595 Ultimate 1095 Ultimate 1595 TexSpray Mark V LABEL, UltraMax II 1095/1595 1 Ultra 1095 Ultra 1595 Ultimate 1095 Ultimate 1595 TexSpray Mark V TUBE, intake; includes 109 1 CLIP, drain line 1 HOUSING, bearing; includes 12, 1 14, 24, 31, 55, 77, 108, 113, 117 MOTOR, electric; 1 includes 126, 127 1095 1595 Ref. 85 87 89 Part 24V021 241920 287290 90 90a 91 93 94 287294 287295 194173 16Y706 16X429 244240 16X904 24V029 99 24A250 105 16X696 106 15C982 107 114531 108 16X770 109 118494 110 16X983 113 15C762 117 187437 123 276980 124 119250 126 15D088 127 115477 128▲ 222385 129 240794 826079 240797 154 288420 241705 159 278075 160 15Y118 163 241735 164 159841 165 189018 Description ROD, connecting; includes 43, 44 DEFLECTOR, threaded GEAR, combination; includes 28, 30 HOUSING, drive, M1; includes 6, 36, 90a 1095 1595/Mark V WASHER, race, thrust PUMP, displacement; includes 41, 76, 109 1095/1595 Mark V HOSE, drain; includes 87 HOSE, coupled 1095/1595 Mark V; includes 19 HANDLE, cart HANGER, stand, cart CAM, cart SCREW, mach, hex washer PUMP, shield rod PACKING, o-ring LABEL, Standard Series SHIELD, pump rod LABEL, torque GROMMET, cover SCREW, shoulder, hex, washer FAN, motor SCREW, mach, torx, pan, hd TAG, WARNING (not shown) HOSE, cpld Ultra 1095/1595 Ultimate 1095/1595 Mark V GUN, contractor 1095/1595 1095/1595 Mark V BAFFLE LABEL, Made in USA HOSE, cpld, 1/4 in. x 3 ft BUSHING, 3/8 in. x 1/4 in. SWIVEL, assembly Qty. 1 1 1 1 1 1 1 1 1 1 2 4 1 1 1 1 1 2 3 1 1 1 1 1 1 1 1 1 1 ▲ Extra Danger and Warning tags and labels available free. * 253131 KIT, repair, tube 9 Mark X Standard Mark X Standard Ref. 1 124 123 58 72 160 1 40-45 in-lb (4.5 - 5.0 N•m) 2 55-60 in-lb (6.2 - 6.7 N•m) 3 200-230 in-lb (22.6 - 25.9 N•m) 4 190-210 in-lb (21.4 - 23.7 N•m) 5 22-28 in-lb (2.4 - 3.1 N•m) 6 25-30 ft-lb (33.8 - 40.6 N•m) 7 70-80 ft-lb (94.9 - 108.4 N•m) 8 130-150 in-lb (14.6 - 16.9 N•m) 159 127 125 2 126 36 84 5 106 90 90a 37 99 8 Torque 6 4 3 51 18 28 105 85 89 30 107 31 1 28 12 117 83 3 24 3 94 7 56 43 19 41b 41c 31 41f 41d 24 3 41 17 130 1 55 41a 41e 8 14 6 77 62 22 10 71 108 23 11 110 41d 44 93 6 91 87 48 166 163 See pages 21 and 22. 10 164 129 ti22894a 332918D Mark X Standard Mark X Standard Parts List Ref. 6 8 10 11* 12 14 17 18 19 22 23 24 28 30 31 36 37 41 41a 41b 41c Part 15C753 15E891 156306 119509 112600 112599 276974 108795 102982 116038 117791 111040 114672 114699 118444 116192 100057 24U755 16N461 16X837 24M725 41d 41e 41f 43 44 48 51 119677 197443 189920 24V025 55 56 58 16C457 193394 287282 62 71 72 77 24P667 16X362 16X363 278204 332918D Description Qty. SCREW, mach, torx, hex 6 CLIP, retaining 2 WASHER, flat 2 WHEEL, pneumatic 2 WASH, lock, spring 4 SCREW, cap, socket hd 4 CAP, leg 2 SCREW, mach, pnh 4 O-RING 1 WASHER, wave spring 2 SCREW, cap, flng hd 2 NUT, lock 6 WASHER, thrust 2 WASHER, thrust 1 SCREW, machine, hex washer hd 6 WASHER, thrust 1 SCREW, cap, hex hd 4 VALVE, check, quick disc 1 HOUSING, seat, check valve 1 HOUSING, ball, check valve 1 KIT, repair, check valve; 1 includes 41d, 41e, 41f O-RING 2 SEAT 1 BALL 1 SPRING, retaining 1 PIN, pump 1 STRAINER, (1-11 1/2 NPSM) 1 COVER, drive, plastic, painted; 1 includes 31 HANGER, pail 1 NUT, retaining 1 SHIELD, motor, painted; 1 includes 123, 124 FRAME, cart 1 LABEL, Mark X 1 LABEL, Mark X 1 CLIP, drain line 1 Ref. 83 Part Description 24V028 HOUSING, bearing; includes 12, 14, 24, 31, 55, 77, 108, 117 84 258909 MOTOR, electric; includes 125, 126, 127 85 24V022 ROD, connecting; includes 43, 44 87 241920 DEFLECTOR, threaded 89 288035 GEAR, combination; includes 28, 30 90 287990 HOUSING, drive; includes 6, 36, 90a 90a 194173 WASHER, race, thrust 91 16X425 PUMP, displacement 93 244240 HOSE, drain; includes 87 94 24V029 HOSE, coupled; includes 19 99 24A250 HANDLE, cart 105 16X696 HANGER, stand, cart 106 15C982 CAM, cart 107 114531 SCREW, mach, hex washer 108 16X770 SHIELD, pump rod 110 16X983 LABEL, Standard series 117 187437 LABEL, torque 123 276980 GROMMET, cover 124 119250 SCREW, shoulder, hex, washer 125 15G845 SPACER, standoff 126 15V577 FAN, motor 127 122347 SCREW, mach, torx, pan, hd 128▲ 222385 TAG, WARNING (not shown) 129 278499 HOSE, cpld, 1/2 in. x 50 ft 130 245820 GUN, spray, texture 159 278075 BAFFLE 160 15Y118 LABEL, Made in USA 163 191239 HOSE, cpld, 3/8 in. x 3 ft 164 159239 ADAPTER 166 246215 GUARD, RAC X Qty. 1 1 1 1 1 1 1 1 1 1 1 1 2 4 1 1 1 2 3 2 1 1 1 1 1 1 1 1 2 1 ▲ Extra Danger and Warning tags and labels available free. * 253131 KIT, repair, tube 11 695/795/MARK IV ProContractor 695/795/MARK IV ProContractor Ref. 1 40-45 in-lb (4.5 - 5.0 N•m) 2 9-11 in-lb (1.0 - 1.2 N•m) 3 200-230 in-lb (22.6 - 25.9 N•m) 4 190-210 in-lb (21.4 - 23.7 N•m) 5 120-130 in-lb (13.5 - 14.6 N•m) 6 25-30 ft-lb (33.8 - 40.6 N•m) 7 38-42 ft-lb (51.5 - 56.9 N•m) 1 8 130-150 in-lb (14.6 - 16.9 N•m) 124 123 9 30-35 in-lb (3.4 - 4.0 N•m) 58 See page 20. 160 72 159 126 84 2 Torque 90-110 in-lb (10.1 - 12.4 N•m) 10 28 5 18 127 36 90a 90 89 6 4 5 16 3 30 103 51 28 104 83 31 15 7 39 7 117 77 10 105 29 23 107 3 24 56 94 27 1 8 35 71 1 9 106 110 85 37 31 1 12 14 6 25 19 41 108 55 91 11 22 10 62 24 3 109 93 6 8 17 76 91 48 87 ti22904a Mark IV See pages 21 and 22. 12 332918D 695/795/MARK IV ProContractor 695/795/MARK IV ProContractor Parts List Ref. 5 6 7 8 10 11 12 14 15 16 17 18 19 22 23 24 25 27 28 29 30 31 35 36 37 39 41 48 51 55 56 58 62 71 Part 16C975 15C753 105510 15E891 156306 119420 106115 110141 101550 121311 276974 260212 107505 102982 116038 117791 111040 16X833 120583 114672 278083 114699 118444 117633 116191 100057 24V095 16Y579 16X834 189920 24V023 16C457 16X322 287281 287282 24P668 16X364 16X367 16X786 16X788 16X357 72 16X365 16X366 17A135 16X787 16X789 332918D Description PLATE, pivot SCREW, mach, hex wash hd WASHER, lock, spring CLIP, retaining WASHER, flat WHEEL, pneumatic WASHER, lock (hi-collar) SCREW, cap, sch SCREW, cap, sch FITTING, connector CAP, leg SCREW, hex washer hd PACKING, o-ring 695/795 Mark IV WASHER, wave spring SCREW, cap tri lobe NUT, lock, nylon, thin pattern FITTING, QD, 695/795 NUT, hand, 695/795 WASHER, thrust GUIDE, hose, platinum WASHER, thrust SCREW, mach, slot hex wash hd SCREW, slot hex wash hd WASHER, thrust, 1095/795 SCREW, cap, hex hd TUBE, formed, ultra, platinum FITTING 695/795 Mark IV STRAINER, (1-11 1/2 npsm) COVER, drive, plastic, painted; includes 31 HANGER, pail CLAMP, pump SHIELD, motor, painted; includes 123, 124 695 Models 795/Mark IV Models FRAME, platinum, 695/795 LABEL, brand, front 695 Ultra 795 Ultra 695 Ultimate 795 Ultimate Mark IV TexSpray LABEL, brand, side 695 Ultra 795 Ultra Mark IV TexSpray 695 Ultimate 795 Ultimate Qty. 1 5 2 2 2 2 4 4 2 1 2 2 1 2 2 6 1 1 2 1 1 5 2 1 4 1 1 1 1 1 1 1 1 1 Ref. 76 77 83 Part 248214 16X203 24V087 84 85 87 89 257185 257186 24V084 241920 287289 90 90a 91 24V032 24V033 107089 16X414 93 16X418 244240 94 103 104 16X904 24V029 287253 118852 105 106 107 108 109 110 117 123 124 126 127 128▲ 159 160 16X697 15C982 114531 16X228 118494 16X981 187437 276980 119250 15D088 115477 222385 278075 15Y118 Description Qty. TUBE, intake; includes 109 1 CLIP, drain line 1 HOUSING, bearing; includes 7, 12, 1 14, 15, 24, 31, 55, 56, 77, 108, 117 MOTOR, electric 1 695 Models 795 Models ROD, connecting 1 DEFLECTOR, threaded 1 1 GEAR, combination; includes 28, 30 HOUSING, drive, M1; 1 includes 6, 36, 90a 695 Models 795/Mark IV WASHER, race, thrust 1 1 PUMP, displacement, 695/795; includes 41, 109 PUMP, displacement, Mark IV 1 HOSE, drain, ultra hi-boy; includes 87 HOSE, coupled 1 695/795 Mark IV; includes 19 TOOL BOX; includes 104 1 SCREW, thd forming, hex 3 washer hd HANGER, stand 1 CAM, cart 2 SCREW, mach, hex washer hd 4 PLATE, front, 3900 PC11 1 PACKING, o-ring 1 LABEL, ProContractor Series 1 LABEL, torque 1 GROMMET, cover 2 SCREW, shoulder 2 FAN, motor 1 SCREW, mach, torx pan hd 1 TAG, warning (not shown) 1 BRACKET, wire 1 LABEL, Made in the USA 1 ▲ Extra Danger and Warning tags and labels available free. 1 13 1095/1595/MARK V ProContractor 1095/1595/MARK V ProContractor Ref. 58 1 40-45 in-lb (4.5 - 5.0 N•m) 2 9-11 in-lb (1.0 - 1.2 N•m) 3 200-230 in-lb (22.6 - 25.9 N•m) 4 190-210 in-lb (21.4 - 23.7 N•m) 5 120-130 in-lb (13.5 - 14.6 N•m) 6 25-30 ft-lb (33.8 - 40.6 N•m) 124 1 7 38-42 ft-lb (51.5 - 56.9 N•m) 123 8 130-150 in-lb (14.6 - 16.9 N•m) 9 30-35 in-lb (3.4 - 4.0 N•m) 72 160 See page 20. 126 159 84 28 2 127 36 3 90-110 in-lb (10.1 - 12.4 N•m) 10 90a 89 5 Torque 90 6 4 37 9 30 18 16 7 28 103 104 110 85 51 62 71 39 10 15 106 83 7 12 105 11 8 107 3 29 35 1 10 22 117 3 24 56 23 14 6 Mark V 108 55 24 3 8 31 1 77 91 91 19 41 17 94 6 93 27 25 109 76 87 48 ti22912a See pages 21 and 22. 14 332918D 1095/1595/MARK V ProContractor 1095/1595/MARK V ProContractor Parts List Ref. 5 6 7 8 10 11 12 14 15 16 17 18 19 22 23 24 25 27 28 29 30 31 35 36 37 39 41 Part 16C975 15C753 105510 15E891 156306 119509 106115 114666 101550 121311 276974 260212 107505 102982 116038 117791 111040 16X833 120583 114672 278083 114699 118444 117633 116192 100057 24J081 48 51 16Y579 16X834 189920 24V024 55 56 58 16C457 16X324 287282 62 71 24P669 16X368 16X371 16X360 16X790 16X792 72 16X369 16X370 16X361 16X791 332918D Description PLATE, pivot SCREW, mach, hex wash hd WASHER, lock CLIP, retaining WASHER, flat WHEEL, pneumatic WASHER, lock (hi-collar) SCREW, cap, socket head SCREW, cap, sch FITTING, connector CAP, leg SCREW, hex washer hd PACKING, o-ring 1095/1595 Mark V WASHER, wave spring SCREW, cap tri lobe NUT, lock, insert FITTING, quick disconnect, (1095/1595 only) NUT, hand (1095/1595 only) WASHER, thrust GUIDE, hose, ultra platinum WASHER, thrust SCREW, mach, slot hex wash hd SCREW, slot hex wash hd WASHER, thrust, 1595 SCREW, cap, hex hd TUBE, formed, ultra, platinum FITTING, pump, QD 1095/1595 Mark V STRAINER, (1-11 1/2 npsm) COVER, drive, plastic, painted; includes 31 HANGER, pail CLAMP, pump, large SHIELD, motor, painted; includes 123, 124 FRAME, platinum, 1095/MARK V LABEL, brand, front 1095 Ultra 1595 Ultra Mark V TexSpray 1095 Ultimate 1595 Ultimate LABEL, brand, side 1095 Ultra 1595 Ultra Mark V TexSpray 1095 Ultimate Qty. 1 5 2 2 2 2 4 4 2 1 2 2 1 2 2 6 1 1 2 1 1 5 2 1 4 1 1 1 1 1 1 1 1 1 Ref. 76 77 83 Part 16X793 248215 16X203 24V088 84 85 87 89 257187 257188 24V085 241920 287290 90 90a 91 93 94 287294 287295 194173 16X419 16X421 244240 16X904 24V029 103 287253 104 118852 105 16X698 106 15C982 107 114531 108 16X385 109 118494 110 16X981 117 187437 123 276980 124 119250 126 15D088 127 115477 128▲ 222385 159 278075 160 15Y118 Description Qty. 1595 Ultimate TUBE, intake; includes 109 1 CLIP, drain line 1 HOUSING, bearing; includes 7, 12, 1 14, 15, 24, 31, 55, 56, 77, 108, 117 MOTOR, electric; includes 126, 127 1 1095 Models 1595/Mark V Models ROD, connecting 1 DEFLECTOR, threaded 1 GEAR, combination; 1 includes 28, 30 HOUSING, drive, M1; 1 includes 6, 36, 90a 1095 Models 1595/Mark V Models WASHER, race, thrust 1 PUMP, displacement; 1 includes 41, 76, 109 1095/1595 Models Mark V Models 1 HOSE, drain; includes 87 HOSE, coupled 1 1095/1595 Mark V; includes 19 TOOL BOX; includes 104 1 SCREW, thd forming, hex washer hd 3 HANGER, stand, cart 1 CAM, cart 2 SCREW, mach, hex washer hd 4 PLATE, front, 5900 PCII PACKING, o-ring 1 LABEL, ProContractor Series 1 LABEL, torque 1 GROMMET, cover 2 SCREW, shoulder 3 FAN, motor 1 SCREW, mach, torx pan hd 1 TAG, warning (not shown) BRACKET, wire 1 LABEL, Made in the USA 1 ▲ Extra Danger and Warning tags and labels available free. 1 15 Mark X ProContractor Mark X ProContractor Ref. 1 124 123 58 72 160 See page 20. Torque 1 40-45 in-lb (4.5 - 5.0 N•m) 2 55-60 in-lb (6.2 - 6.7 N•m) 3 200-230 in-lb (22.6 - 25.9 N•m) 4 190-210 in-lb (21.4 - 23.7 N•m) 5 120-130 in-lb (13.5 - 14.6 N•m) 6 25-30 ft-lb (33.8 - 40.6 N•m) 7 38-42 ft-lb (51.5 - 56.9 N•m) 8 130-150 in-lb (14.6 - 16.9 N•m) 9 30-35 in-lb (3.4 - 4.0 N•m) 159 127 2 125 28 84 36 126 5 90-110 in-lb (10.1 - 12.4 3 N•m) 10 89 90a 3 37 28 5 18 90 6 4 6 9 104 4 103 85 30 16 106 10 15 7 7 39 3 180 29 56 8 107 11 1 23 3 35 110 77 62 105 1 31 71 117 12 83 108 31 1 14 6 55 24 3 10 22 91 41b 41d 41a 94 19 17 8 41f 41e 41c 93 6 87 41 48 ti23015a See pages 21 and 22. 16 332918D Mark X ProContractor Mark X ProContractor Ref. 5 6 7 8 10 11 12 14 15 16 17 18 19 22 23 24 28 29 30 31 35 36 37 39 41 41a 41b 41c Part 16C975 15C753 105510 15E891 156306 119509 112600 112599 101550 121311 276974 260212 102982 116038 117791 111040 114672 24M197 114699 118444 117633 116192 100057 16M441 24U755 16N461 16X837 24M725 41d 41e 41f 48 51 189920 24V025 55 56 58 16C457 16X324 287282 62 24P669 332918D Description PLATE, pivot SCREW, mach, hex wash hd WASHER, lock, spring CLIP, retaining WASHER, flat WHEEL, pneumatic WASHER, lock (hi-collar) SCREW, cap, socket head SCREW, cap, sch FITTING, connector CAP, leg SCREW, hex washer, hd O-RING WASHER, wave spring SCREW, cap, tri lobe NUT, lock, insert WASHER, thrust GUIDE, hose, ultra platinum WASHER, thrust SCREW, mach, slot hex wash hd SCREW, slot hex wash hd WASHER, thrust, 1595 SCREW, cap, hex hd TUBE, formed, ultra, platinum FITTING HOUSING, seat, check valve HOUSING, ball, check valve KIT, repair, check valve; includes 41d, 41e, 41f O-RING SEAT BALL STRAINER, (1-11 1/2 npsm) COVER, drive, plastic, painted; includes 31 PACKING, o-ring CLAMP, pump, large SHIELD, motor, painted; includes 123, 124 FRAME, platinum, 1095/MARK V Qty. 1 6 2 2 2 2 4 4 2 1 2 2 1 2 2 4 2 1 1 5 2 1 4 1 1 1 1 1 1 1 1 1 1 1 1 1 Ref. 71 72 77 83 Part 16X362 16X363 16X203 24V089 84 258909 85 87 89 24V086 241920 288035 90 287990 90a 91 93 94 103 104 105 106 107 108 110 117 123 124 125 126 127 128▲ 159 160 180 194173 16X427 244240 24V029 287253 118852 16X698 15C982 114531 16X209 16X981 187437 276980 119250 15G845 15V577 122347 222385 278075 15Y118 112746 Description Qty. LABEL, front 1 LABEL, right side 1 CLIP, drain line 1 HOUSING, bearing; 1 includes 7, 12, 14, 15, 31, 55, 56, 77, 108, 117, 180 MOTOR, electric; includes 125, 1 126, 127 ROD, connecting 1 DEFLECTOR, threaded 1 1 GEAR, combination; includes 28, 30 1 HOUSING, drive; includes 6, 36, 90a WASHER, race, thrust 1 PUMP, displacement 1 1 HOSE, drain; includes 87 KIT, hose, cpld, 1/2 in.; includes 19 1 TOOL BOX; includes 104 1 SCREW, thd forming, hex washer hd 3 HANGER, stand, cart 1 CAM, cart 2 SCREW, mach, hex washer hd 4 PLATE, front, PCII, 7900 1 LABEL, ProContractor Series 1 LABEL, torque 1 GROMMET, cover 2 SCREW, shoulder 3 SPACER, standoff 2 FAN, motor 1 RING, retaining 1 TAG, warning (not shown) BRACKET, wire 1 LABEL, Made in the USA 1 NUT, lock, thin pattern 2 ▲ Extra Danger and Warning tags and labels available free. 1 17 1095/1595/Mark V IronMan 1095/1595/Mark V IronMan 58 Ref. 72 160 84 159 124 126 2 1 123 89 127 36 90a Torque 1 40-45 in-lb (4.5 - 5.0 N•m) 2 9-11 in-lb (1.0 - 1.2 N•m) 3 200-230 in-lb (22.6 - 25.9 N•m) 4 190-210 in-lb (21.4 - 23.7 N•m) 5 90-110 in-lb (10.1 - 12.4 N•m) 6 25-30 ft-lb (33.8 - 40.6 N•m) 90 6 3 4 37 85 117 83 28 30 12 31 28 1 51 5 77 15 7 62 3 23 6 24 108 94 91 55 1 31 Mark V 27 10 11 71 56 25 22 19 24 3 91 41 93 109 ti22929a 110 14 6 76 87 8 17 48 163 154 129 154 164 130 165 See pages 21 and 22. 130 163 1095/1595 18 164 Mark V 332918D 1095/1595/Mark V IronMan 1095/1595/Mark V IronMan Ref. 6 7 8 10 11 12 14 15 17 19 22 23 24 25 27 28 30 31 36 37 41 Part 15C753 105510 120211 156306 122267 106115 114666 101550 15C871 107505 102982 116038 117791 111040 16X833 120583 114672 114699 118444 116192 100057 48 51 16Y579 16X834 15V573 24V024 55 56 58 16C457 16X324 287282 62 71 16X711 16X368 16X371 16X790 16X792 16X360 72 76 77 83 16X369 16X370 16X791 16X793 16X361 248215 16X203 24V088 84 257187 257188 332918D Description Qty. SCREW, mach, torx, hex 5 WASHER, lock, spring 2 CLIP, retaining 2 WASHER, flat 2 WHEEL, foam 2 WASH, lock, spring 4 SCREW, cap, socket hd 4 SCREW, cap, sch 2 CAP, leg 2 PACKING, o-ring 1 1095/1595 Mark V WASHER, wave spring 2 SCREW, cap, flng hd 2 NUT, lock, insert 6 FITTING, QD, 3/8 npsm, 1 1095/1595 NUT, hand, 1095/1595 6 WASHER, thrust 2 WASHER, thrust 1 SCREW, machine, hex washer hd 5 WASHER, thrust 1 SCREW, cap, hex hd 4 FITTING, pump, QD 1 1095/1595 Mark V STRAINER, (1-11 1/2 NPSM) 1 COVER, drive, plastic, painted; 1 includes 31 HANGER, pail 1 CLAMP, pump, large 1 1 SHIELD, motor, painted; includes 123, 124 FRAME, cart, 1095/1595 1 LABEL, UltraMax 1 Ultra 1095 Ultra 1595 Ultimate 1095 Ultimate 1595 TexSpray/Mark V LABEL, UltraMax II, 1095/1595 1 Ultra 1095 Ultra 1595 Ultimate 1095 Ultimate 1595 TexSpray Mark V TUBE, intake; includes 109 1 CLIP, drain line 1 HOUSING, bearing; includes 7, 12, 1 14, 15, 24, 31, 55, 56, 77, 108, 117 MOTOR, electric; includes 126, 127 1 1095 1595/Mark V Ref. 85 87 89 Part 24V085 241920 287290 90 90a 91 93 94 287294 287295 194173 16X420 16Y599 244240 16X904 24V029 108 16X385 109 118494 110 16X982 117 187437 123 276980 124 119250 126 15D088 127 115477 128▲ 222385 129 240794 826079 130 240797 240797 826080 154 246240 241705 159 278075 160 15Y118 163 277322 241735 164 164672 159841 165 189018 Description ROD, connecting DEFLECTOR, threaded GEAR, combination; includes 28, 30 HOUSING, drive, M1; includes 6, 36, 90a 1095 1595/Mark V WASHER, race, thrust PUMP, displacement 1095/1595; includes 41, 109 Mark V HOSE, drain; includes 87 HOSE, coupled 1595/1595 Mark V; includes 19 PLATE, front, 5900, PCII PACKING, o-ring LABEL, IronMan series LABEL, torque GROMMET, cover SCREW, shoulder, hex, washer FAN, motor SCREW, mach, torx, pan, hd TAG, WARNING (not shown) HOSE, cpld, 1/4 in. x 50 ft 1095/1595 Ultra 1095/1595 Ultimate HOSE, cpld, 3/8 in. x 50 ft 1095/1595/Ultra Mark V 1095/1595 Ultimate GUN 1095/1595 Mark V BRACKET, wire LABEL, Made in USA HOSE, coupled 1095/1595 Mark V FITTING 1095/1595 Mark V SWIVEL, assembly Qty. 1 1 1 1 1 1 1 1 1 1 1 2 3 1 1 1 1 1 2 1 1 1 1 1 1 ▲ Extra Danger and Warning tags and labels available free. 19 Hose Reel and Gun Hose Reel and Gun 2 168 Ref. 172 180 170 99 173 1 130-150 in-lb (14.6 - 16.9 N•m) 2 25-35 ft-lb (33.8 - 47.4 N•m) 3 120-130 in-lb (13.5 - 14.6 N•m) 4 38-42 ft-lb (51.5 - 56.9 N•m) 171 1 Torque 183 164 163 42 169 174 201 167 5 ti14917b 16 18 39 129 154 156 154 178 4 154 156 129 179 695/795/1095/1595 3 156 179 219 155 129 155 Mark IV / Mark V Mark X Parts List Ref. 5 16 18 39 Part 16C975 121311 260212 24V095 24J081 16M441 42 99 129 164672 196178 159239 24B691 240794 826079 245225 278499 154 288420 826085 241705 246468 245820 20 Description PLATE, Pivot Mount FITTING, Connector, NPT x JIC SCREW, Hex Washer HD TUBE, Formed, Ultra, Platinum 695/795 Models 1095/Mark V Models Mark X ADAPTER 695/795/1095/1595 Mark IV/Mark V Mark X REEL, hose, ultra HOSE, coupled 695/795/1095/1595 Ultra 695/795/1095/1595 Ultimate Mark IV/Mark V Mark X GUN, spray 695/795/1095/1595 Ultra 695/795/1095/1595 Ultimate Mark V Models Mark IV Models Mark X Qty. 1 1 2 1 Ref. 155 1 163 164 167 168 169 170 171 172 173 174 178 179 1 2 2 2 2 1 1 1 1 1 Part 241735 191239 156 180 183 201 162453 196178 158491 24B248 122347 122534 24E400 122524 278085 122518 15X618 122542 122607 189018 159841 159239 122669 122787 24E016 Description HOSE, whip Mark IV, Mark V Mark X ADAPTER 695/795/1095/1595 Mark IV/Mark V Mark X CAP, swivel, complete RING, retaining, external SPRING, wave PIN, pop, lock out RING, retaining, external HANDLE, swivel PIN NUT, pin SPRING WASHER, flat SWIVEL BUSHING Mark IV/Mark V Mark X WASHER CAP TUBE, Hose Reel, Pivot Qty. 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1 332918D Control Box Control Box Ref. Torque 1 10-15 in-lb (1.1 - 1.7 N•m) 2 40-45 in-lb (4.5 - 5.0 N•m) 3 22-28 in-lb (2.4 - 3.1 N•m) 4 200-230 in-lb (22.6 - 25.9 N•m) 5 30-35 in-lb (3.3 - 3.9 N•m) 6 15-20 in-lb (1.7 - 2.2 N•m) 7 2-3 in-lb (0.2 - 0.4 N•m) 59 131 131 2 26 7 65 60 32 3 142 45 52 96 23 52 38 144 2 49 68 4 143 150 82 63 5 6 148 33 70 75 73 ti22914a 177 1 34 115 Parts List Ref. Part Description 23 26 32 117791 114391 115522 33 34 38 45 15C979 15D527 116167 16V095 119541 49 195428 SCREW, cap, flange head SCREW, grounding SCREW, mach, pnh (ProContractor/IronMan series) SWITCH, rocker SWITCH, rocker, Mark X KNOB, potentiometer SCREW, #10, taptite phil SWITCH, toggle, (ProContractor/IronMan series) BOOT, toggle (ProContractor/IronMan series) CONTROL, board; includes 23, 26, 60, 131, 142, 144 120V Models 240V Models LABEL, warning, domestic JUMPER WIRE LABEL, LCD, GMAX (ProContractor/IronMan series) LABEL, control box cover, ultra (Standard series) LABEL, control box cover, ultra (ProContractor/IronMan series) LABEL, control (ProContractor/IronMan series) LABEL, control (Standard series) SWITCH, reed (ProContractor/IronMan series) 52 24P847 24P848 59▲ 16T784 60 16T541 63 16X796 16Y785 65 16X797 68 16Y789 16Y786 70 122507 332918D Qty. Ref. Part 2 1 3 73 75 1 1 1 4 1 82 96 1 1 1 24V062 115 131 142 143 144 1 1 1 15H064 15H065 15R876 15H066 256219 24V061 1 1 16Z019 100187 148 150 177 15C973 16T482 16T483 120059 15G935 16T547 116171 24V030 16U215 16Y791 16Y790 16Y788 Description Qty. LIGHT, ProGuard (Standard series) NUT CORD, power 120V Models 695, 795, 1095, Mark IV 120V Models 1595, Mark V Mark X 120V CSA Models 1595, Mark V POTENTIOMETR, assembly COVER, control ProContractor/IronMan series; includes 32, 38, 63, 65, 68 Standard series; includes 38, 63, 68 GASKET RIVET, snap SWITCH/PLUG 695/795/1095/Mark IV/Mark X 1595/Mark V CONNECTOR, electrical (1595/Mark V) STRAIN RELIEF 695/795/1095/Mark IV 1595/Mark V/Mark X KIT, repair, coil; includes 150 SCREW, machine, flat head LABEL, blank, elec, std (Standard) ProContractor/IronMan Mark X ProContractor 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 ▲ Extra Danger and Warning tags and labels available free. 21 Filter Filter Ref. 1 2 35-45 ft-lb (47.4 - 61.0 N•m) 3 190-210 in-lb (21.4 - 23.7 N•m) 4 100-120 in-lb (11.2 - 13.5 N•m) 5 38-42 ft-lb (51.5 - 56.9 N•m) 6 15-25 in-lb (1.6 - 2.8 N•m) 7 365-385 in-lb (41.2 - 43.5 N•m) 66 9 1 74 5 39 67 2 Torque 90-110 in-lb (10.1 - 12.4 N•m) 118 114 Mark X 86 92 173 7 40 172 80 42 20 6 81 81 50 21 50 13 13 4 174 189 ti22913a 80 21 3 Parts List Ref. 9 13 20 21 Part 117285 16U013 111457 15C972 116424 39 40 42 24V095 24J081 16M441 121889 122533 125926 164672 196178 183285 50 66 22 24E233 24E234 15G563 15C765 Description PACKING, o-ring SCREW, cap, socket head PACKING, o-ring PIN, grooved NUT, Mark X TUBE, formed 695/795 Models 1095/Mark V Models Mark X GROMMET, transducer FITTING 1095/1595/Mark V (ProContractor series) 695/795/Mark IV/Mark X (ProContractor series) 695/795/1095/1595 (Standard series) Mark IV/Mark V (Standard series) 1095/1595/Mark V (IronMan series) Mark X (Standard series) KIT, handle; includes 21, 81 ProContractor/IronMan Series Standard Series Mark X CAP, filter Qty. 1 3 1 1 1 1 Ref. 67 74 80 81 86 1 1 1 Part 16T543 15C766 24B156 287879 24A382 24D286 114708 243222 92 114 118 172 173 174 189 244071 244067 244068 244069 104813 125926 193709 193710 245103 Description BASE, filter TUBE, diffusion VALVE, prime, HD VALVE, prime, Mark X BASE, valve Standard series ProContractor/IronMan Mark X TRANSDUCER, pressure control; includes 20 FILTER, fluid 30 mesh 60 mesh, original equipment 100 mesh 200 mesh PLUG, pipe FITTING, elbow SEAT, valve SEAL, seat, valve KIT, repair, valve, Mark X; includes 21, 50, 80, 81, 172, 173 Qty. 1 1 1 1 1 1 1 1 1 1 1 1 17A197 GUARD, base, filter (ProContractor/IronMan Series) 1 332918D Notes Notes 332918D 23 Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written recommendations. This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco. This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation. THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale. GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties. In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise. FOR GRACO CANADA CUSTOMERS The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés, à la suite de ou en rapport, directement ou indirectement, avec les procédures concernées. Graco Information For the latest information about Graco products, visit www.graco.com. For patent information, see www.graco.com/patents. TO PLACE AN ORDER, contact your Graco distributor or call 1-800-690-2894 to identify the nearest distributor. All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. Original instructions. This manual contains English. MM 332918 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA Copyright 2014, Graco Inc. All Graco manufacturing locations are registered to ISO 9001. www.graco.com Revision D - April, 2014
