Download GE Spacemaker JVM64 User's Manual
Transcript
we Touch Control Panel I 1 “PROBE” Appears On Readout: When YOU Plug in the Oven Probe has been forgotten when Auto Roast or Temp Cook functions are being used. @ Probe is not securelv. seated in oven wall rece~tacle. ● The readout panel displays five 8’s and 18 POWER on the upper portion and all of the oven functions .. . .. . . .... .. . on tne lower portion. Atter 15 seconds, all Ilghts disappear and “RESET” comes on in the upper portion. Touch the CLEAR/OFF pad and oven is ready for use. If power is disrupted at any time, the above sequence reoccurs, and you must reset CLOCK after touching CLEAR/OFF. Manual Defrost. Gentle, more uniform thawing at automatic Power Level 3, or change power level after /entering time. (See page 9.) Hold/Timer. This feature uses no microwave energy while it functions as both a kitchen timer or as a holding period between defrost and time or temperature cooking. (See page 11.) / Start. Must touch this pad for oven to begin any functions. / Min Pad. Use with number minutes. / pads to enter whole Clear/Off. When touched, it stops the oven and erases all settings except time of day. / Auto Roast. Insert probe, touch this pad, and desired number pad for Code to slow-cook or temperature cook meat with automatic preset program. (See pages 14 and 15.) Z Auto Defrost. Touch this pad, then Code number, food weight and the oven automatically sets Power Levels and defrosting time. (See page 16.) ~ AUTOMATIC FAN FEATURE Cooking appliances installed under the oven might, under some heavy usage conditions, cause temperatures high enough to overheat some internal parts of the microwave oven. To prevent overheating from taking place, the vent fan is designed to automatically turn on at low speed if excessive temperatures occur. Should this happen, the fan cannot be manually turned off, but it will automatically turn off when the internal parts have cooled. The fan may stay on up to approximately 30 minutes after the range and microwave oven controls have been turned off. 7