Download Garmin Software Version 0719.00 Cockpit Reference Guide

Transcript
SECTION 12 – ABNORMAL
OPERATION
SECTION 12: ABNORMAL
OPERATION
3) PFD2 – By pressing the DISPLAY BACKUP
button on the right audio panel.
12.2 ABNORMAL COM OPERATION
12.1 REVERSIONARY MODE
When a COM tuning failure is detected by the system,
the emergency frequency (121.500 MHz) is automatically
loaded into the active frequency field of the COM radio
for which the tuning failure was detected. In the event of
a dual display failure, the emergency frequency (121.500
MHz) automatically becomes the active frequency to the
pilot through the pilot headset.
Reversionary Mode is a mode of operation in which all
important flight information is presented on at least one of
the remaining displays. Flight parameters are presented
in the same format as in normal mode.
Reversionary display mode is manually activated by:
1) PFD1 – By pressing the DISPLAY BACKUP
button on the left audio panel.
2) MFD – By pressing the DISPLAY BACKUP
button on the left or the right audio panel.
PFD1
PFD2
MFD
Normal Operation
Figure 12-1 G1000 Reversionary Mode: Failed PFD1
190-00708-00 Rev. A
Garmin G1000 Cockpit Reference Guide for the Socata TBM 850
12-1