Download Garmin Software Version 0552.14 Cockpit Reference Guide
Transcript
Procedures Flight Instruments 6) Turn either FMS Knob to select the desired transition. The “Vectors” option assumes vectors will be received to the final course segment of the approach and will provide navigation guidance relative to the final approach course. EIS 7) Press the ENT Key. The cursor moves to the MINIMUMS field. Nav/Com/ XPDR/Audio 8) If desired, the DA/MDA for the selected approach procedure may be entered and displayed on the PFD. Turn the small FMS Knob in the direction of the green arrow to change the display from OFF to BARO. GPS Nav 9) Press the ENT Key. The cursor moves to the altitude field. Turn the small FMS Knob to enter the published DA/MDA for the selected approach procedure. 11) Turn the large FMS Knob to select either ‘LOAD?’ or ‘ACTIVATE?’. 12) Press the ENT Key. Additional Features ACTIVATE AN APPROACH IN THE ACTIVE FLIGHT PLAN Hazard Avoidance Selecting ‘LOAD?’ enters the selected approach procedure into the active flight plan, but is not currently active. Selecting ‘ACTIVATE?’ enters the selected approach procedure into the active flight plan and is immediately activated. Procedures Flight Planning 10) Press the ENT Key. ‘LOAD? or ACTIVATE?’ is now displayed with ‘LOAD?’ highlighted. 1) Press the PROC Key. Abnormal Operation 2) Turn the large FMS Knob to highlight ‘ACTIVATE APPROACH’. 3) Press the ENT Key. Annun/Alerts ACTIVATE A VECTOR TO FINAL APPROACH FIX 1) Press the PROC Key. 2) Turn the large FMS Knob to highlight ‘ACTIVATE VECTOR-TO-FINAL’. Appendix 3) Press the ENT Key. 4) The final approach course becomes the active leg. Index 190-00645-05 Rev. A Garmin G1000 Cockpit Reference Guide for the Quest KODIAK 100 35