Download Garmin Software Version 0530.04 Cockpit Reference Guide
Transcript
SECTION 2 FLIGHT INSTRUMENTS 2.7 BAROMETRIC ALTITUDE MINIMUMS The desired barometric altitude minimums can be set in the Timer/References Window. The altitude ranges from 0 to 16,000 feet in 10-foot increments. The minimums are reset anytime the power is cycled. Figure 2-16 Barometric Minimum Descent Altitude Settings Set the barometric altitude minimums: 1) Press the TMR/REF Softkey. 2) Turn the large FMS Knob to highlight the ‘Minimums’ field (Figure 2-16). 3) Turn the small FMS Knob to select BARO. OFF is selected by default. Press the ENT Key or turn the large FMS Knob to highlight the next field. 4) Use the small FMS Knob to enter the desired altitude (from zero to 16,000 feet). 5) To remove the window, press the CLR Key or the TMR/REF Softkey. The desired barometric minimum descent altitude (MDA, or Decision Height, DH) can be set in the Timer/ References Window. Visual annunciations alert the pilot when approaching the MDA: Alerting is inhibited while the aircraft is on the ground. If the aircraft climbs after having reached the MDA, once it reaches 50 feet above the MDA, alerting is disabled. Within 2500 ft Within 100 ft Barometric Minimum Bug Barometric Minimum Box Altitude Reached Figure 2-17 Barometric Minimum Descent Altitude Alerting Visual Annunciations • When the aircraft altitude descends to within 2500 feet of the MDA setting, the Barometric Minimum Box appears with the altitude in light blue text. The bug appears on the tape in light blue once in range. • When the aircraft descends through 100 feet of the MDA, the bug and text turn white. • Once the aircraft descends past the MDA, the bug and text turn yellow and the aural alert, “Minimums Minimums”, is generated. 2-8 Garmin G1000 Cockpit Reference Guide for the Cessna 350/400 190-00567-01 Rev. B