Download Garmin Software Version 0530.04 Cockpit Reference Guide

SECTION 7 – NAVIGATION
3) Turn the small FMS Knob to the right to display the
‘NRST’ airports to the aircraft’s current position as
shown in Figure 7-9.
4) Turn the large FMS Knob to select the desired
airport.
5) Press the ENT Key. The cursor is now displayed on
‘ACTIVATE?’.
6) Press ENT again to activate a Direct-to.
Select a Direct-to Destination to a Recently
Entered Identifier
1) Press the Direct-to (
) Key.
2) Turn the small FMS Knob to the left. Initially, a
flight plan waypoint list is displayed as in Figure
7-8. The list is only populated when navigating a
flight plan.
3) Turn the small FMS Knob to the right to display the
‘RECENT’ waypoints as shown in Figure 7-10.
Figure 7-10 Recently Entered Waypoints List (PFD)
4) Turn the large FMS Knob to select the desired
airport.
5) Press the ENT Key. The cursor is now displayed on
‘ACTIVATE?’.
6) Press ENT again to activate a Direct-to.
Cancelling Direct-to Navigation
1) Press the Direct-to (
) Key.
2) Press the MENU Key to display the Options Window.
The cursor will be flashing on ‘Cancel Direct-to
NAV’.
3) Press the ENT Key to cancel the direct-to.
7.3
NAVIGATING AN EXAMPLE FLIGHT
PLAN
NOTE: The following example flight plan is
for instructional purposes only. All database
information depicted should be considered not
current.
The following discussion is an example of navigating a
flight plan with the WAAS capable GPS system while the
G1000 provides vertical guidance through descents. A
lateral flight plan (LNAV) would be navigated in much the
same way, but would not include vertical guidance when
the final approach course is active.
The example is a flight plan from KMKC to KCOS filed
using the TIFTO2 departure, various Victor Airways, and
the DBRY1 arrival with the transition at TBE. Enroute
altitude will be 12,000 feet. An LPV (WAAS) approach
will be selected for runway 35R. A missed approach will
be executed at the Missed Approach Point (MAP). A few
enroute changes are demonstrated.
NOTE: If the loaded arrival procedure has
published altitudes contained in the navigation
database, these are for turbojet aircraft only.
Accept or change these values as desired to meet
the requirements of the clearance.
1) Prior to departure, the TIFTO2 departure, the
airways, and the DBRY1 arrival at KCOS are loaded.
190-00567-01 Rev. B
Garmin G1000 Cockpit Reference Guide for the Cessna 350/400
7-5