Download Garmin Part 23 AML STC Pilot's Guide

TOC
Cover
3.1.6Panning
Sec 1
System
Sec 2
PFD
Information is
related to the tip
of the pointer
Foreword
The Panning Map Page function allows you to move the map beyond its
current limits without adjusting the map scale and to examine information at
the pointer location. When you select the panning function — by pressing the
small MFD knob — a target pointer flashes on the map display. A window also
appears at the top of the map display showing the latitude/longitude position of
the pointer, the ETE from your present position to the pointer, elevation at the
pointer, and bearing and distance to the pointer from your present position.
Sec 3
MFD
Sec 4
Hazard
Avoidance
Map Pointer
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Present Position
Figure 3-6 Navigation Map Pointer Location Information
Sec 7
Symbols
1) While viewing a Map, press the small MFD knob. A flashing pointer will appear
in the tip of the ownship symbol. The measured information is referenced to the
tip of the arrow.
Sec 8
Glossary
Figure 3-7 Navigation Map Initial Pointer Location
190-00601-02 Rev. H
Garmin G500/600 Pilot’s Guide
3-7
Appendix B
Index
3) Press the small MFD knob again to cancel panning. The display will return to
the previous map view.
Appendix A
2) Turn the large MFD knob to move the cursor horizontally. Turn the small MFD
knob to move the cursor vertically.