1
Download Fujitsu F2 User's Manual
Transcript
CHAPTER 2 DEPENDENCE FUNCTIONS Figure 2.3-1 Operation of Sequencer Program execution start Level1 NO Event1 occurs YES YES Event4 occurs NO Level2 Event3 occurs YES YES NO Event4 occurs NO Level3 Event2 occurs YES NO Break ■ Setting Sequencer The sequencer can be set by the dialog or the command. ● Setting by dialog Select [Debug] - [Sequence] menu. For details, refer to "4.6.6 Sequence" in "SOFTUNE Workbench Operation Manual". ● Setting by Command 1. The event is set according to the SET EVENT command. 2. The event set by the SET SEQUENCE command is set as a sequence. For details, refer to "3.22 SET EVENT (type 2)" or "3.28 SET SEQUENCE (type2)" in "SOFTUNE Workbench Command Reference Manual". 166
