Download Fantom Vacuum FM765MC User's Manual

FM765MC_31_IB_E_100510_paths.indd 1-1
10-05-10 10:57 AM
2
TOLL FREE: 1-800-798-7395
FM765MC_31_IB_E_100510_paths.indd 2-3
www.fantom.com
3
10-05-10 10:57 AM
4
TOLL FREE: 1-800-798-7395
FM765MC_31_IB_E_100510_paths.indd 4-5
www.fantom.com
5
10-05-10 10:57 AM
6
TOLL FREE: 1-800-798-7395
FM765MC_31_IB_E_100510_paths.indd 6-7
www.fantom.com
7
10-05-10 10:57 AM
a
b
c
d
f
8
e
g
TOLL FREE: 1-800-798-7395
FM765MC_31_IB_E_100510_paths.indd 8-9
h
i
www.fantom.com
9
10-05-10 10:57 AM
10
TOLL FREE: 1-800-798-7395
FM765MC_31_IB_E_100510_paths.indd 10-11
www.fantom.com
11
10-05-10 10:57 AM
12
TOLL FREE: 1-800-798-7395
FM765MC_31_IB_E_100510_paths.indd 12-13
www.fantom.com
13
10-05-10 10:57 AM
14
TOLL FREE: 1-800-798-7395
FM765MC_31_IB_E_100510_paths.indd 14-15
www.fantom.com
15
10-05-10 10:57 AM
16
TOLL FREE: 1-800-798-7395
FM765MC_31_IB_E_100510_paths.indd 16-17
www.fantom.com
17
10-05-10 10:57 AM
PROBLEM
SUGGESTED ACTION
Reset Motor Thermostat:
1. Push the On/Off pedal once.
Vacuum Shut
Off Due to
Overheating
(motor protective
thermostat
automatically
turned off unit)
2. Unplug the unit.
3.Check the source of the overheating problem (i.e. clogged hose
or filter, full bag). Unclog the hose, change bag and clean the
filters if necessary.
4. Wait at least 45 minutes before attempting to reuse the
vacuum. After the unit has cooled down for 45 minutes, plug in
the vacuum cleaner and step on the On/Off pedal. The vacuum
should start again.
5. If the vacuum still does not start, contact customer service at
1-800-798-7395.
1. Plug in firmly.
Vacuum Won’t
Run
2. Reset circuit breaker or replace fuse.
3. Step on On/Off pedal to turn on.
4. Reset motor thermostat.
1. Put in a new HEPA dust bag.
2. Adjust carpet height setting.
Vacuum Won’t
Pick Up
3. Remove obstruction from air path.
4. Replace belt if broken.
5.Push telescopic tube and flexible hose in securely.
6. Push floor attachment or accessory in securely.
7. Clean/change filters.
Vacuum Picks Up
Moveable Rugs
Or Pushes Too
Hard
Rotating Brush
Does Not Turn
Air Flow
Restricted With
Attachment,
Sound of Vacuum
Changes
Cord Does Not
Rewind
18
TOLL FREE: 1-800-798-7395
FM765MC_31_IB_E_100510_paths.indd 18-19
1. Adjust carpet height setting.
1. Replace belt.
2. Check belt changing instructions.
1.Open the manual suction control on the handle of the flexible
hose.
2. Remove obstruction in air path.
1.Straighten or un-knot the cord.
www.fantom.com
19
10-05-10 10:57 AM
20
TOLL FREE: 1-800-798-7395
FM765MC_31_IB_E_100510_paths.indd 20-21
www.fantom.com
21
10-05-10 10:57 AM