Transcript
TW-25S & TW-35S Installation Guide Flush Mount Assembly Flush Mount Complete assembly Flush Mount Installation Push assembled tweeter through cut out hole Cut diameter: TW-25S=2” (50.8mm), TW-35S=3” (76.20mm) Top Ring Make sure that the top ring and bottom cup snap when pushed together Twist on nut until the tweeter is secured Bottom Cup Angle Mount Assembly & Installation Earthquake has provided two (2) mounting screws to be used in the Angle and Surface options Fasten the panel clamp down from behind the panel. Panel Surface Mount Assembly & Installation Top Ring Top Ring Mounting screws Panel Bottom Cup Bottom Cup Panel www.earthquakesound.com Panel Clamp
