Transcript
TNT - T693 Specifications and Installation CUSTOM SPEAKER INSTALLATION FEATURES ! ! ! ! 86mm - 3-6/16” ! body that delivers precision sound quality High flow ventilation stamped steel basket design Large butyl rubber surround for more accurate bass NOMEX / ROMEX spider assembly for linear cone travel and durability Shallow mount design for American or foreign cars and trucks 2” (66mm) mylar mid-range and over 1” (30mm) mylar super tweeter both of which deliver an exceptionally high frequency for all ranges of music. 95mm - 3-3/4” ! Low mass poly injection cone NOTE: Hand tighten the screws in a crisscross pattern to avoid bending the speaker basket or stripping screws. 108mm - 4-1/4” 220mm x 151mm - 5-19/20" x 8-7/10" 236mm - 9-3/10” FACTORY REPLACEMENT INSTALLATION SPECIFICATIONS 4 SCREWS PER SPEAKER Model Diameter (inches) Diameter (mm) Description Impedance Frequency Response Sensitivity Power Handling SPEAKER FACTORY CUTOUT MOUNTING CLIPS T693 6" x 9” 152.4mm x 228.6mm 3-Way 4-Ohm 20Hz - 22kHz 90dB 600 Watts INSTALLATION Grilles Yes Mounting Diameter (inches) Mounting Diameter (mm) 5-19/20" x 8-7/10" 151mm x 220mm Mounting Depth (inches) Mounting Depth (mm) 3-6/16" 86mm NOTE: Hand tighten the screws in a crisscross pattern to avoid bending the speaker basket or stripping screws. www.earthquakesound.com Sound That Will Move You SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.