Download Dell Lifecycle Controller 1.5 Practices Guide

LC Integration Best Practices Specification

Create a NIC job
o Set all iSCSI boot configuration attributes
 Wait for both jobs to complete
 Wait for CSIOR to complete
o Since boot source changes only occur after reboot, they get
detected only after CSIOR and refresh
6. iSCSI configuration settings
o For Broadcom
 IscsiViaDHCP = Disabled
 TcpViaDHCP = Disabled
 ConnectFirstTgt = Enabled
 IscsiInitiatorIpAddr = <IP of initiator>
 IscsiInitiatorSubnet = <Subnet mask for initiator>
 IscsiInitiatorGateway = <Gateway for initiator>
 IscsiInitiatorName = <Initiator name>
 IscsiTgtBoot = Enabled
 FirstHddTarget = Disabled
 FirstTgtIpAddress = <IP of target>
 FirstTgtIscsiName = <Target name>
 FirstTgtBootLun = <Target LUN>
7. System should boot into iSCSI as needed
153