Download Dell Chassis Management Controller Version 4.50 Command Line Reference Guide

cfgADGcSRVLookupEnable (Read or Write)
Description
Determines how the global catalog server is looked up. If using pre‑configured global catalog
servers, then iDRAC uses the values cfgAdGlobalCatalog1, cfgAdGlobalCatalog2 and
cfgAdGlobalCatalog3.
This object is applicable only to iDRAC.
Legal Values
•
•
Default
0
0(FALSE) — use pre‑configured Global Catalog Servers (GCS)
1(TRUE) — use DNS to look up GCS
cfgADGcRootDomain (Read or Write)
Description
The names of the Active Directory root domain used for DNS look up, to locate Global Catalog
servers.
This object is applicable only to iDRAC.
Legal Values
String. Maximum length = 254
Default
Null
cfgLDAP
This group allows you to configure settings related to the Lightweight Directory Access Protocol (LDAP).
Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have the Chassis Configuration Administrator privilege.
NOTE: For CMC, you can configure a setting that does not have the hash sign (#) prefixed in the output. To modify a
configurable object, use the —o option.
The following sections provide information about the objects in the cfgLDAP.
cfgLdapEnable (Read or Write)
Description
Turns on or off LDAP service.
If this property is disabled, local CMC authentication is used for user logins.
NOTE: For CMC, enabling this option turns off cfgADEnable.
Legal Values
•
•
Default
0
1 (TRUE) — Enable
0 (FALSE) — Disable
cfgLdapServer (Read or Write)
Description
192
Configures the address of the LDAP Server. IPv4 and IPv6 are supported.