Transcript
L900 Outlet Box Cover Can be used at any electrical feed connection point (Live, Straight, L, T or X). Size: 5” sq. Screws included. L911 Live End Connector To start a run. Finishes: White (P), Black (MB) Finishes: White (P), Black (MB) L913 Straight Connector To connect two track sections end-to-end. May be used as feed point. Finishes: White (P), Black (MB) L914R L Connector TRACK LIGHTING Raceway HALO® To connect two track sections at a right-hand 90° angle. Inside ground. May be used as feed point. Finishes: White (P), Black (MB) L914L L Connector L915R T Connector To connect two track sections at left-hand 90° angle. Outside ground. May be used as feed point. To connect three track sections into a right-hand T configuration. Grounds matched to L915L for grid system. May be used as feed point. Finishes: White (P), Black (MB) Finishes: White (P), Black (MB) L915L L916 T Connector To connect three track sections into a left-hand T configuration. Grounds matched to L915R for grid system. May be used as feed point. X Connector To connect four track sections into a cross configuration. May be used as feed point. Finishes: White (P), Black (MB) Finishes: White (P), Black (MB) L981 Conduit Adapter Designed to accept standard 1/2” trade size conduit fitting (not supplied). Use when feeding to surface mount Raceway trac through surface conduit system. L984 T- B a r A t t a c h m e n t C l i p Allows surface mount Raceway Trac to be attached to inverted tee ceiling. Order as follows: 2 kits for 2’ Trac; 2 kits for 4’ Trac; 3 kits for 8’ Trac and 4 kits for 12’ Trac. Finishes: White (P), Black (MB) L994 45° Pendant Adapter For installing pendant mounted Power-Trac on sloped ceiling. For use with L992 and L993. Finishes: White (P), Black (MB) L993 Pendant Kit Assembly To suspend track from ceiling. Order as follows: 2 kits for 2’ Trac; 2 kits for 4’ Trac; 3 kits for 8’ Trac; and 4 kits for 12’ Trac. Includes one 18” threaded steel stem, canopy and mounting hardware. Finishes: White (P), Black (MB) L48 48” Steel Stem L993 can be field cut and threaded. Finishes: White (P), Black (MB) DE611 Dead End Replacement Dead Ends for Raceway Track (6 included) Finishes: White (P), Black (MB) COOPER LIGHTING 315