Transcript
SIN K SPECI FI C AT I ONS BLANCO STEELART BLANCO PRECISION™ MICROEDGE™ 1-3/4 BOWL With Ledge (3 Hole) Model 516198 F E AT U R E D M O D E L 516198 10" bowl depths ADDITIONAL MODELS 516195 516202 1-3/4 Bowl with Ledge (1 Hole) 1-3/4 Bowl F E AT U R E S • • • C O D E / S TA N DA R D S C O M P L I A N C E MODEL 516198 NOMINAL DIMENSIONS BOWL DEPTH MODEL OVERALL LEFT RIGHT 516198 33-1/2 x 20-1/2 10 10 DXF cutout templates available on our web site. ASME 112.19.3-00 IAPMO/UPC listed 40 1-5/8 127 5 202.25 8 223-190 (Lg), 223-189 (Sm) 224387 (Available May 2009) 224390 (Available May 2009) 127 5 82.25 3-1/4 374.25 14-3/4 OPTIONAL ACCESSORIES Sink Grids: Colander: Glass Cutting Board: DRAIN DIAMETER 3-1/2 406 16 WA R R A N T Y 520 20-1/2 • Blanco America’s BLANCO PRECISION MICROEDGE sinks feature a LIMITED LIFETIME WARRANTY to be free of all manufacturing defects under normal use. See our complete warranty for details. While Blanco America endeavors to provide accurate information, all dimensions are nominal, cannot be guaranteed, and are subject to change or cancellation. Blanco America assumes no responsibility for use of superseded or voided specifications. 25 1 31.75 1-1/4 31.75 1-1/4 431.5 17 330 13 P R O D U C T S P E C I F I C AT I O N 849.5 33-1/2 254 10 Inset or Flushmount sink to be 33-1/2" in length and 20-1/2" in front-to-back depth. Each sink is handcrafted from a single panel of 18 gauge, 304 series stainless steel, with 18/10 chrome/ nickel content and satin polished finish. Sink to feature polished "MicroEdge" 1/16" rim with 1/4" corner radius edge and rear drain placement. Sink to be Blanco Model 516198, with both left and right bowl equal depths of 10". J O B I N F O R M AT I O N 374.25 14-3/4 40 1-5/8 Job Name: 127 5 127 5 82.25 3-1/4 • 18 gauge, 304 series stainless steel 18/10 chrome/nickel content Satin polished finish Versatile design with Inset (Similar to Drop-in) or Flushmount installation capabilities Polished "MicroEdge" rim with 1/4" corner radius Stylish drain grooves for improved functionality New design allows for easy installation in standard 25" countertop 254 10 • 31.75 1-1/4 • Contractor: BL A N C O A M E R I C A 8 0 0 . 4 51. 5 7 8 2 w w w. b l a n c o a m e r i c a . c o m © 2008 BLANCO AMERICA 11/08 SPEC-003 520 20-1/2 Specifier: 406 16 Date Specified: 202.25 8 Contact:
