Transcript
Part Number Update Bulletin No: PNU-206 Effective Date: January 30, 2015 Cancels: NA Page: 1 of 1 Subject: Bendix Announces New Part Numbers for Bendix® TABS-6™ Standard Controller for Tank- or Frame-mounted Units Trailer ABS systems are designated by the number of wheel speed sensors and pressure modulator valves used; for example, a 2S/1M system uses two wheel speed sensors and one modulator. Trailer System Old OE Part Number Old AM Part Number CrackPressure New OE Part Number Order New AM Part Number Two (2) Sensors, One (1) Modulator (2S/1M) Axle Systems Only 5014015 801855 3.0 ± 0.5 psi K109807 K109808 Two (2) Sensors, One (1) Modulator (2S/1M) Dolly Axle Systems Only 5014112 801990 3.0 ± 0.5 psi K109809 K109812 Part Number Label (Includes Wheel Speed Sensor Harness Installation Reference) Bendix® TABS-6™ Standard Controller (shown without connector cover installed) Log-on and Learn from the Best On-line training that's available when you are Visit www.brake-school.com. 24/7/365. ©2015 Bendix Commercial Vehicle Systems LLC, a member of the Knorr-Bremse Group • 01/15 • All Rights Reserved. New Controller Crack‑Pressure 4.5 ± 0.5 psi For improved brake balance performance. Additionally, Bendix® brand air disc brake applications no longer require a 3.3 psi crack-pressure quick-release valve.