Transcript
Part Number Update Bulletin No: PNU-193 Effective Date: July 22, 2014 Cancels: NA Page: 1 of 1 Subject: New Bendix® TABS-6™ Trailer ABS Kits Featuring Trailer Roll Stability (TRSP™) Effective immediately, the following kits are available to provide trailer roll stability for trailers. New Trailer ABS Installations: Trailer Type Use This Kit Kit Includes Single Axle Semi-Trailer • Bendix® WS-24™ Wheel Speed Sensors or Tandem Axle Short-Spread Semi-Trailer • • • • 9" Power Pigtail 9" Power Cable Trailer Label Bendix® SR-5™ Spring Brake Valve, and • Full Installation Instructions K098097 Retrofit Trailer Kits: Trailer Type Single Axle Semi-Trailer Does the Trailer ® Already Have Bendix Brand Wheel Speed Sensors Installed? Does the Trailer Already Have a ® Bendix SR-5™ Spring Brake Valve Installed? Use Kit Part Number Yes K098095 Yes K098097 No or Tandem Axle Short-Spread Semi-Trailer (Includes Bendix® SR-5™ Spring Brake Valve) Yes K098096 No K098097 No (Includes Bendix® SR-5™ Spring Brake Valve) During the installation, Bendix® ACom® Diagnostics PC Software — version 6.7 or above — will be required to configure the Bendix® TABS-6™ ECU. Bendix ACom Diagnostics is available for free download from www.bendix.com. Log-on and Learn from the Best On-line training that's available when you are Visit www.brake-school.com. 24/7/365. ©2014 Bendix Commercial Vehicle Systems LLC, a member of the Knorr-Bremse Group • 07/14 • All Rights Reserved.