Download Avaya Using Technician Interface Software User's Manual
Transcript
Using Syslog Messaging to Monitor Router Events Parameter: Attribute Name: Attribute Number: Fault Map wfSyslogEntFltrFaultMap 12 Default: 3 (CRIT) Options: 1 (EMERG) | 2 (ALERT) | 3 (CRIT) | 4 (ERR) | 5 (WARNING) | 6 (NOTICE) | 7 (INFO) | 8 (DEBUG) Function: Instructions: Command: MIB Object ID: Maps router event messages with a severity level of fault to a UNIX system error level that Syslogd recognizes. Table C-1 describes each of these error levels. We recommend accepting the default UNIX system error level for this severity level. To map this severity level to a different UNIX system error level, set wfSyslogEntFltrFaultMap to the error level you want. set wfSyslogEntFltrEntry.wfSyslogEntFltrFaultMap.<host_IP_address>. <entity_code>.<filter_index> <1 | 2 | 3 | 4 | 5 | 6 | 7 | 8> 1.3.6.1.4.1.18.3.3.2.15.4.1.12 Table C-1. Syslogd Error Levels Error Level Description EMERG A panic condition that syslogd normally broadcasts to all users ALERT A condition that you should correct immediately, such as a corrupted system database CRIT Critical conditions, such as hard device errors ERR Errors WARNING Warning messages NOTICE Conditions that are not errors but may require special handling INFO Informational messages DEBUG Messages that contain information you can use when debugging or troubleshooting your network 308657-14.00 Rev 00 C-43