Download Avaya Bogen Paging Control System Expansion Assembly Model PCMAAD User's Manual

PEC CODE: 5323-107
COM CODE: 408186021
MODEL: LUPCMADD
Paging Control System Expansion
Assembly Model PCMADD
Package Contents
Your carton contains:
* LUPCMADD Paging Control System Assembly
* Pair of Rack Brackets
* Power Supply
* Installation Manual
* Male-to-Male RCA Cable
* Male-to-Female “Y” Adapter
* Mounting Screws
Description
The LUPCMADD Paging Control System Expansion Assembly can only be used with a LUPCMALL Paging Control System or
another LUPCMADD to add more paging zones to your paging system.The LUPCMADD will add three additional paging zones
to your system when the LUPCMALL or LUPCMADD already includes three zone paging modules.
Before You Start...
Verify that there is a standard electrical outlet available for the power supply (not controlled by a wall switch).
Verify that there is at least 12” of open wall or rack space below the existing LUPCMALL or LUPCMADD.
Installation
STEP 1 - If there are Zone Paging Modules to add to the PCMADD, please do so before you mount it.
STEP 2 - Mount the LUPCMADD approximately 4” below the existing LUPCMALL or any additional LUPCMADDs.
STEP 3 - Disconnect power from the entire PCM system.
STEP 4 - Follow the wiring diagram (see Figure 2) to connect the
CPU modules together.
STEP 5 - Use the chart on the right (Figure 1) to set the CPU
module switches.
STEP 6 - Verify connections and settings, then power up the system.
NOTE: Refer to the LUPCMALL manual for speaker connections and
operation of system.
Figure 1: CPU Module Switches
LUPCMADD Switch
Set to On
Module
1
2
3
4
5
6
7
8
9
10
1
2
2,
3
3,
3,
3,
4
4,
4,
1
1
2
2, 1
1
2
Physical
Zones
10-18
19-27
28-36
37-45
46-54
55-63
64-72
73-81
82-90
91-99
* All of the switches are off left.
Page 1 of 2
Issue 1, October 1999
Specifications subject to change without notice.
© 1999 Bogen Communications Inc. All rights reserved.
Part No. 54-2010-01 Printed in Korea 9910
Select Code: 701-000-110
Figure 2: Wire Connections
PC
M
TIM
PC
M
CP
U
PC
M
TB
M
PC
M
ZP
M
PC
M
ZP
M
PC
M
ZP
M
RCA JACK
X1
X2
IN
RT LPB
X3
GM
X4
IN
RT HPB
GM
EM/S
C
GN
D
AU
X
GN
D
+ 12
VDC
- 1.5
A
PC
M
CP
U
PC
M
ZP
M
Wiring Connections
X1
FROM
PCMALL
X1
X2
X3
X4
TO
PCMADD
X1
X2
X3
X4
X2
IN
RT LPB
X3
GM
X4
IN
RT HPB
GM
EM/S
C
GN
D
AU
X
GN
D
+ 12
VDC
- 1.5
A
USE PROVIDED “Y”
ADAPTER FOR MULTIPLE
LUPCMADDs
IMPORTANT
-If using Hi-Power background music, also connect
HPBGM (IN & RT) terminals of the units together.
-If using Lo-Power background music, also connect LPBGM
(IN & RT) terminals of the units together.
Page 2 of 2