Download Avaya Bay Command Console User's Manual

Using the Bay Command Console (BCC)
Note: The BCC displays the same output as show config -all when you enter
show config -recursive at root level in configuration mode.
Displaying the Path to Every Configured Object
To display by BCC instance identifier the path to every object configured at the
next subcontext level, enter the lso -recursive (lso -r) command from your
current context.
Note that lso -r intially lists all objects configured at the next subcontext level, and
then displays the detailed path to each of those objects in standard BCC
configuration syntax.
Example (from root level, BLN router):
box# lso
board/1
board/2
board/3
-r
box; board/1;
box; board/2;
.
.
.
.
box; snmp;
community/public
board/4
board/5
console/1
dns
ethernet/2/1
ftp
ip
snmp
syslog
telnet
tftp
.
.
box; snmp; community/public;
manager/public/0.0.0.0
manager/public/192.32.241.36
box; snmp; community/public; manager/public/0.0.0.0;
box; snmp; community/public; manager/public/192.32.241.36;
.
.
.
.
.
.
.
.
.
Example (from an IP interface on ethernet/2/1):
ip/192.168.125.34/255.255.255.224# lso -r
arp/192.168.125.34/1
rip/192.168.125.34
box; ethernet/2/1; ip/192.168.125.34/255.255.255.224; arp/192.168.125.34/1;
box; ethernet/2/1; ip/192.168.125.34/255.255.255.224; rip/192.168.125.34;
2-14
117383-C Rev. 00