Transcript
Technical Specifications TH-PT8 Projector | Suspended Ceiling Tile 8" General Features 24” x 8” above existing ceiling tile, suitable for most suspended tile grids including 600 x 600mm or 1200 x 600mm. Maximum weight capacity 50lbs (22.7kg) Hardware 6.1m (20ft) Ø1.2mm (16-gauge) support wire 3m (10ft) of stainless steel safet y cable Turnbuckles allow for easy installation Fixing hardware for solid concrete and wooden joist Projector Mount Compatibility 1.5” NPT pipe adaptor Telehook Projector Mounts TH-WH-PJ-C M and TH-WH-PJ-FM Finish White gloss powder coat Cable Management 2 ‘push out’ panels for electrical sockets and cabling Warranty 10 years limited Dimensions 618.84mm (24.36”) Ø7mm (0.28”) 70mm (2.75”) 84mm (3.30”) 58mm 111.70mm (2.28”) (4.40”) 203.20mm (8”) 228.60mm (9”) 342.60mm (13.48”) Ø6.50mm (0.25”) 25.30mm (1”) 595.24mm (23.44”) No portion of this document or any artwork contained herein should be reproduced in anyway without the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 01.04.11©