Download Ariens RM1332 User's Manual
Transcript
Rear-Engine Riders Parts Manual Models 927046 - RM1028 927053 - RM9028 927054 - RM9030 927055 - RM1332 927056 - RM1330 927306 - RM9028 927307 - RM1328 927308 - RM1332 927310 - RM1028 02758600B 11/01 Supercedes 02758600,A Printed in USA THE MANUAL PRODUCT REGISTRATION Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance. For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals. A warranty registration card must be filled out, signed, and returned at time of purchase. This card activates the warranty. Claims meeting requirements during limited warranty period will be honored. Hardware descriptions are given in decimals. Decimals to Fractions .063 1/16 .563 9/16 .125 1/8 .625 5/8 .188 3/16 .688 11/16 .250 1/4 .750 3/4 .313 5/16 .813 13/16 .375 3/8 .875 7/8 .438 7/16 .938 15/16 .500 1/2 1.00 1 SERVICE AND REPLACEMENT PARTS When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit and engine. Numbers are located on the product registration card in the unit literature package. They are printed on a serial number label, located on the frame of your unit. • Record Unit Model and Serial numbers here: • Record Engine Model and Serial numbers here: UNAUTHORIZED REPLACEMENT PARTS Use only Ariens replacement parts. The replacement of any part on this vehicle with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. Ariens disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts. YOUR SATISFACTION IS IMPORTANT Questions? Please follow these helpful steps: 1. Refer to the manuals supplied with your unit. They will guide you through safe and proper operation and maintenance. They contain specifications on your unit. If your questions are not answered in these manuals, go to step number two. 2. Contact Your Dealer. Our dealers will be happy to supply any service or advice required to keep your unit operating at peak efficiency. A factory trained staff is available to support your equipment needs. They stock genuine Ariens parts and lubricants manufactured with the same precision and skill as the original. If your questions are not resolved by the support staff, ask for the manager or owner. When contacting your Dealer supply your model and serial numbers. TO SPEED PARTS ORDERING: 1. 2. 3. 4. Know the model and serial numbers of your unit. Know the part number required. Know the quantity required. Know the part description. Contents Models Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Frame and Seat . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Speed Selector . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Brake and Clutch . . . . . . . . . . . . . . . . . . . . . . . . .10 Engine and Belts . . . . . . . . . . . . . . . . . . . . . . . . .12 Rear Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Solenoid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Gear Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Mower Height Linkage . . . . . . . . . . . . . . . . . . . . .18 Mower Engagement Linkage . . . . . . . . . . . . . . . .20 Mower Pan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Mower Spindle . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Model 927046 (RM1028e) - 10.0 HP Briggs & Stratton w/28” Mower Serial No. 000101 and up Model 927053 (RM9028) - 9.0 HP Briggs & Stratton w/28” Mower Serial No. 000101 and up Model 927054 (RM9030) -9.0 HP Briggs & Stratton w/30” Mower Serial No. 000101 and up Model 927055 (RM1332) - 13.0 HP Briggs & Stratton w/32” Mower Serial No. 000101 and up Model 927056 (RM1330) - 13.0 HP Briggs & Stratton w/30” Mower Serial No. 000101 and up Model 927306 (RM9028) - 9.0 HP Briggs & Stratton w/28” Mower Serial No. 000101 and up Model 927307 (RM1328) - 13.0 HP Briggs & Stratton w/28” Mower Serial No. 000101 and up Model 927308 (RM1332) - 13.0 HP Briggs & Stratton w/32” Mower Serial No. 000101 and up Model 927310 (RM1028) - 10.0 HP Briggs & Stratton w/28” Mower Serial No. 000101 and up Reference Table Hardware descriptions are given in decimals. Decimals to Fractions .063 .125 .188 .250 .313 .375 .438 .500 1/16 1/8 3/16 1/4 5/16 3/8 7/16 1/2 .563 .625 .688 .750 .813 .875 .938 1.00 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 © 1999, 2001 Ariens Company - All Rights Reserved 1 Decals Models 927046,053,054,055,056,306,307,308,310 1 6 5 4 3 2 1 N R 2 M ow er Cl u tch In Out Speed Selector Located on right hand side of driver's seat High M ow er H eight Lo w 3 4 WIDTH OF CUT 5 PA0220 FLEX-N LOAT -F 5 5 71A 0787 5 DANGER/DANGER/PELIGRO ITEM NO. 1 2 3 4 5 PART NO. 07732700 05225000 07855500 07855200 07855400 63611400 DESCRIPTION QTY. Decal Set - RM Dash (053, 054, 306, 307) Decal Set - RM Dash (046, 055, 056, 308, 310) Mower Clutch Decal Decal - Speed Selector Mower Height Decal Decal Set - Mower Deck 2 1 1 1 1 1 1 Decals Models 927046,053,054,055,056,306,307,308,310 CAUTION Cast Iron Bore 077976 Before starting engine be sure machine is in neutral and mower clutch is disengaged. 1 3 9 (927053,306) 4 9 (927054) 078558 (927307) 2 (927055, 308) 5 (927056) (927046,310) 7 PA0220 MULCH MOW BAG VAC 077017 6 ITEM NO. PART NO. DESCRIPTION QTY. 1 07797600 2 3 4 07855800 07733200 07732700 Decal - Cast Iron Bore (054,055,056,307,308) Caution Decal - Eng. Starting Decal - 9028 (053, 306) Decal Set - RM Dash (054, 307) ITEM NO. PART NO. DESCRIPTION Decal Set - RM Dash (046,055,056,308,310) Decal - Mulch-Mow-Bag-Vac (054,055,306,307,308) Operating Instructions Decal (053,054,055,056) 1 5 05225000 1 1 1 6 07701700 7 07859800 3 QTY. 1 1 1 Frame and Seat Models 927046,053,054,055,056,306,307,308,310 1 14 15 3 25 2 22 4 6 10 5 16 11 12 7 8 13 12 9 11 24 17 18 26 7 22 23 25 28 27 42 7 35 56 12 20 37 38 36 43 39 22 22 29 19 30 7 44 40 31 32 33 34 45 41 28 46 21 20 47 48 12 54 7 7 55 48 49 12 48 52 50 7 51 53 PA0102 4 Frame and Seat Models 927046,053,054,055,056,306,307,308,310 ITEM NO. 1 PART NO. DESCRIPTION 02756800 Seat V-1400 (055,056,307,308) Seat V-1300 (046,053,054,306,310) Seat Bracket Baffle (306,310) Nut-Hex 10-24 Pin-Hair Internal .09 x .188 x 2.00 Washer-Locking-External .200x.402x.022 Nut-Locking-Center .31-18 Washer-Lock Internal .313 x .030 Seat Leg Assembly Washer-Flat-Steel .38 x .875 x .083 Washer-Lock .312 x .097 Bolt-Hex .31-18 x .75 Grade 5 Washer-Flat-Steel .328 x .875 x .062 Muffler Guard (307,308) Screw (307,308) Battery Strap Standup Tube Bolt-Hex .31-18 x 1.50 Gr. 5 Service Bar Brace Screw-Tapping .31-18 x .50 Back Cover Bolt-Hex .25-20 x .50 Gr. 5 Bolt-Hex .25-20x.50 Gr.5 (306,310) Bolt-Round Head Square Neck .312-18 x .62 Brace Nut-Locking-Center .25-20 Nut-Locking-Center .25-20 (306,310) 02755200 2 3 4 5 02743500 02735100 06536600 06713700 6 06310400 7 8 06529800 06301800 9 10 02739100 06435700 11 12 06307400 05947000 13 06439400 14 15 16 17 18 19 20 21 22 02755500 02755600 07507500 02701200 05952400 02722700 07411500 02701100 05947900 05947900 23 24 25 06212200 02700400 06529700 06529700 QTY. 1 1 1 1 2 2 1 18 2 1 4 4 11 2 1 3 1 1 4 2 2 1 3 5 1 1 2 4 5 ITEM NO. PART NO. DESCRIPTION QTY. 26 27 28 29 30 31 32 33 34 06116900 05947200 07412000 01035800 52700200 02460900 07517700 06517300 06306900 35 36 37 38 39 40 41 42 43 44 45 46 47 48 02736400 07501900 07406400 07414900 07507600 06912700 02734500 02530700 02742300 03640900 02708000 02739500 02718600 06436700 49 06215700 50 51 52 53 02718700 02705200 06530400 06212200 54 07415300 55 56 02717700 07009300 Screw-Machine 10-24 x .62 Bolt-Hex .31-18 x .50 Screw-Tapping .25-20 x .50 Spacer Bushing Frame with Decals Key Set Cap-Ignition Switch Nut-Panel .625-32 Washer-Lock Internal .625 x .045 Seat Pivot Bracket Knob Screw-Tapping 10-12 x .50 Screw-Tapping 10-24 x .375 Plastic Grommet Throttle Control Dash Panel - RM Rubber Pad Battery Tray Hook Cowl Grille Insert & Shell Assembly Left Hand Fender Brace Washer-Flat-Steel .323 x .625 x .062 Bolt-Round Head Square Neck .31-18 x .75 Right Hand Fender Brace Frame Brace Nut-Locking-Flange .312-18 Bolt-Round Head Square Neck .31-18 x .62 Screw-Tapping .312-18 x 1.50 Frame Brace Nut-Retainer .25-20 2 4 4 2 1 1 1 1 2 1 1 6 2 6 1 1 1 1 2 1 1 1 4 2 1 1 4 4 1 1 3 Steering Models 927046,053,054,055,056,306,307,308,310 1 3 2 4 5 6 10 7 18 19 11 20 6 8 6 12 9 21 22 13 23 15 14 24 16 29 32 30 17 31 28 27 38 26 34 34 25 35 8 37 36 8 39 33 36 39 42 40 41 22 8 43 47 44 45 48 44 8 41 33 49 46 50 52 51 50 49 6 PA0141 Steering Models 927046,053,054,055,056,306,307,308,310 ITEM NO. PART NO. DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 02753700 05803700 02749100 07503700 02753800 07411500 02707600 01212800 02707400 05801600 06215500 12 05505300 Steering Wheel 13 Inch Pin-Roll .250 x 1.75 Steering Shaft Plug Tube Screw-Tapping .31-18 x .50 Brace Flange Bushing Steering Support Pin-Roll .188 x 1.00 Bolt-Round Head Square Neck .38-16 x 1.0 Bushing-Flange .625 x 1.156 x .375 Steering Bracket Spacer .380 x .750 x .236 Washer-Flat-Steel .630 x 1.250 x .062 Washer-Flat-Steel .380 x 1.500 x .125 Nut-Locking-Jam .38-16 Washer-Hardened-Steel-Thr .515 x .97 x .062 Screw-Tapping 10-24 x .25 Retaining Plate Screw-Tapping 10-24x.25 Nut-Locking-Nylon .375-24 Steering Gear Pinion Bolt-Serrated Round Head Slotted .31-18 x .75 Washer-Lock .38 x .094 Nut-Locking-Flange .312-18 Nut-Locking-Center .50-13 Axle Bracket 13 14 15 02705300 02506200 06445100 16 06443400 17 18 06537200 06418100 19 20 21 22 23 24 25 07415500 01310000 07411500 06538800 02506100 02705400 07005300 26 27 28 29 06308800 06530400 06536300 02706600 QTY. 1 1 1 1 1 11 1 5 1 2 1 1 1 1 1 1 1 1 4 1 1 2 1 1 4 4 4 1 1 7 ITEM NO. PART NO. DESCRIPTION 30 07126400 07108000 05505800 Tire/Wheel Assembly Tire 4.10/3.50 - 4 Bushing-Flange .750 x 1.380 x .750 x 1.557 Wheel-Compression Spindle Cup Hub Cap Pin-Cotter .12 x 1.0 Bushing-Sleeve .500 x .750 x 1.560 Pin-Cotter .09 x .75 Washer-Flat-Steel .505 x .880 x .072 Washer-Flat-Steel .755 x 1.375 x .062 Bolt-Hex .50-13 x 4.00 Gr. 5 Pin-Groove .250 x 1.25 Spindle Washer R.H. Wheel Spindle L.H. Wheel Spindle Arm Hanger Pin Washer-Flat-Steel .505 x .875 x .024 Bushing-Flange .500 x .625 x .312 x .750 Pin-Cotter .12 x 1.25 Axle Tie Rod Ball Joint Nut-Jam .375-24 Steering Link Washer-Flat-Steel .406 x .812 x .065 31 32 33 34 07123100 01238200 00337700 06707100 05516400 35 36 06706900 06436600 37 06441500 38 39 40 41 42 43 44 05961900 05804000 02512000 02735300 02735400 02706300 02508600 06436000 45 05503700 46 47 48 49 50 51 52 06712600 02729200 02706400 02917100 06534700 02705800 06436200 QTY. 2 2 4 2 2 2 4 2 1 2 1 1 1 2 1 1 1 1 4 2 3 1 1 2 2 1 1 Speed Selector Models 927046,053,054,055,056,306,307,308,310 60 23 24 25 5 19 28 11 44 22 20 26 30 29 1 12 13 14 6 7 11 32 21 16 33 17 8 2 31 20 19 18 13 9 36 15 10 34 35 3 37 11 38 27 15 4 40 41 40 39 42 27 43 46 47 54 53 49 51 50 5 48 55 52 15 45 PA0111 8 Speed Selector Models 927046,053,054,055,056,306,307,308,310 ITEM NO. 1 2 3 4 5 6 7 8 PART NO. DESCRIPTION 05921500 07534300 02756700 02712900 06529200 05503600 Bolt-Hex .31-18 x 1.50 Knob, 1.4 Dia. .50-13 Shift Lever Shoulder Bolt Nut-Hex .31-18 Bushing-Flange .372 x .500 x .312 x .625 Bell Crank Washer-Flat-Steel .531 x 1.06 x .095 Washer-Flat-Steel .38 x .626 x .033 Spring-Tension .92 x 69 x 1.75 Pin-Cotter .09 x .75 Bolt-Hex .31-18 x .75 Grade 5 Washer-Flat-Steel .344 x 1.375 x .075 Spacer Bushing .5 x .32 x .21 Nut-Locking-Center .31-18 Shift Rod Nut-Jam .375-24 Ball Joint-Snap In Flange Bushing Bushing-Sleeve .625 x .750 x .500 Bearing Ball .625 x 1.375 x .44 Shift Link Nut-Locking-Center .50-20 Washer-Hardened-Steel-Thr .515 x .97 x .062 Bearing Housing Carrier Assembly Pin-Cotter .12 x 1.0 Transfer Shaft Carrier Yoke 02700700 06441900 9 06407800 10 08309900 11 12 13 06706900 05947000 06439700 14 15 16 17 18 19 20 00607100 06529800 02700800 06537400 03645500 01212900 05504700 21 05403900 22 23 24 02701700 06530000 06418100 25 26 27 28 29 02716100 52709000 06707100 02701900 02750900 QTY. 1 1 1 1 3 1 1 1 ITEM NO. PART NO. DESCRIPTION 30 31 32 07411500 02735200 07414400 Screw Tapping .31-18 x .50 Neutral Stop Screw-Tapping .31-18 x .75 33 05512800 34 05412000 35 36 07412000 06413400 37 38 39 40 41 42 43 44 02716000 02715900 02528400 52709100 01212800 02703800 06537000 02703900 057019 45 46 47 48 49 50 07412000 06700300 06529700 06908300 02754200 06436700 51 52 53 01035800 02707000 06221800 54 55 02704000 05947900 Bushing-Sleeve .634 x 1.000 x .465 Bearing-Ball .750 x 1.781 x .61 Screw-Tapping .250-20 x .50 Washer-Hardened-Thrust .758 x 1.23 x .031 Disc Adapter Spindle Bolt Disc Drive Carrier Assembly Flange Bushing Shift Arm Nut-Locking-Center .31-24 Indicator Rod Ring-Retaining-Extention .625 x .035 Screw-Tapping .25-20 x .50 Pin-Cotter .06 x .50 Nut-Locking-Center .25-20 Clip Bracket-Neutral Washer-Flat-Steel .323 x .625 x .062 Spacer Bushing Quadrant Bolt-Round Head Square Neck .31-18 x 1.0 Indicator Bolt-Hex .25-20 x .50 Gr. 5 1 1 3 1 2 1 3 1 1 1 2 2 1 1 1 1 1 1 2 1 1 9 QTY. 5 1 4 1 1 4 1 1 1 1 1 2 1 1 1 2 2 1 4 1 1 1 1 1 1 1 6 Brake and Clutch Models 927046,053,054,055,056,306,307,308,310 3 2 4 3 8 2 20 3 6 7 9 10 1 5 19 16 11 28 12 15 8 13 14 17 12 10 9 8 27 26 18 23 21 22 4 24 10 35 33 2 29 25 4 32 31 30 34 36 38 39 30 2 37 31 PA0121 10 Brake and Clutch Models 927046,053,054,055,056,306,307,308,310 ITEM NO. PART NO. DESCRIPTION 1 2 3 4 5 6 02701300 02505500 06707100 06529800 02503300 06439600 7 8 9 10 02703500 06529200 06706900 06436700 11 12 13 14 02702700 06707300 02702800 06301800 15 08309000 16 17 18 02702200 02703700 08325200 19 20 02703600 07005300 Clutch, Shaft Flange Bushing Pin-Cotter .12 x 1.0 Nut-Locking-Center .31-18 Brake Band Washer-Flat-Steel .520 x .810 x .033 Clutch Bracket Nut-Hex .31-18 Pin-Cotter .09 x .75 Washer-Flat-Steel .323 x .625 x .062 Brake Lever Pin-Cotter .12 x .75 Clevis Pin .368/.373 x 3-1/4 Washer-Lock Internal .313 x .030 Spring-Compression .105 x .585 x .75 Brake Bracket Brake Rod Spring-Tension .051 x .60 x 2.25 Clutch Rod Bolt-Serrated Round Head Slotted .31-18 x .75 QTY. 1 4 3 3 1 1 1 5 6 4 1 2 1 2 1 1 1 1 1 ITEM NO. PART NO. DESCRIPTION 21 06439400 22 23 01035800 08317900 24 25 26 05947000 02519400 06435700 27 28 29 30 31 32 33 34 35 05946900 02703200 02713800 02740000 06700300 02703300 06529900 06117800 02519500 36 37 38 39 06537200 02703400 02706900 06211800 Washer-Flat-Steel .328 x .875 x .062 Spacer Bushing Spring-Torsion .125 x 1.0 x 1.75 Bolt-Hex .31-18 x .75 Gr. 5 Brake Latch Washer-Flat-Steel .38 x .875 x .083 Bolt-Hex .31-18 x 1.00 Gr. 5 Clutch Pedal Arm Clutch Arm Clevis Pin .184/.186 x 1 Pin-Cotter .06 x .50 Brake Arm Nut-Hex 8-32 Screw-Machine 8-32 x 1.00 Spacer Shoulder .344 x .500 x .469 x .750 Nut-Locking-Jam .38-16 Brake Pedal Arm Pedal Bolt-Round Head Square Neck .38-16 x .75 2 11 QTY. 1 1 1 1 1 1 1 1 1 2 2 1 2 1 1 2 1 2 2 Engine and Belts Models 927046,053,054,055,056,306,307,308,310 1 11 12 2 3 7 4 5 7 8 6 9 10 13 14 15 16 17 18 20 19 21 22 24 23 7 26 25 3 27 28 3 29 PA0150 12 Engine and Belts Models 927046,053,054,055,056,306,307,308,310 ITEM NO. 1 PART NO. DESCRIPTION 08251600 Engine - 9.0 HP B & S I/C (053,054,306) Engine - 13 HP B & S I/C (055,056,307,308) Engine - 10 HP B & S non I/C (046,310) Pre-Guard-Rewind (306,307, 308,310) Nut-Locking-Center .31-18 Nipple Pipe Cap Bolt-Hex .31-18 x 1.50 Gr. 5 Washer-Flat-Steel .328 x .875 x .062 Key-Straight .25 x 2.0 x .25 Engine Sheave V-Belt 3L-Section 35-1/2 x 27/64 Guard (306,310) Screw-Tapping 10-24 x .375 (306,310) Washer-Flat-Steel .505 x 1.140 x .250 Washer-Lock .438 x .133 08251700 08260300 2 02755400 3 4 5 6 7 06529800 02749600 03563600 05952400 06439400 8 9 10 06602100 02701000 07211200 11 12 02755700 07412100 13 06408300 14 06310700 QTY. 1 ITEM NO. PART NO. DESCRIPTION 15 16 05964800 07216900 Bolt-Hex .44-20 x 1.25 Gr 5 V-Belt HA 64.56 x .516 1 (046,053,054,056,306,307,310) 1 07215500 1 5 1 1 4 9 1 1 1 1 1 17 18 19 20 06529600 02714000 02700600 06212100 21 22 00325400 06436000 23 24 25 26 06706900 07321600 05947000 08319200 27 28 29 02509200 06530400 02504400 1 1 13 QTY. V-Belt 4L-Section 64-3/4 x 17/32 (055,308) Nut-Locking-Center .375-16 Shoulder Stud Idler Arm Bolt-Round Head Square Neck .31-18 x 1.50 Wave Washer Washer-Flat-Steel .505 x .875 x .024 Pin-Cotter .09 x .75 Idler-Flat 2.75 x .31 Bolt-Hex .31-18 x .75 Gr. 5 Spring-Tension .062 x .72 x 6.65 Belt Finger Brace Nut-Flange .312-18 Belt Finger 1 1 1 1 1 1 1 1 1 1 1 1 3 1 Rear Axle Models 927046,053,054,055,056,306,307,308,310 1 2 3 4 9 8 7 6 3 11 5 10 12 13 16 14 17 15 18 20 19 21 1 ITEM NO. 22 PA0160 PART NO. DESCRIPTION QTY. 1 2 3 00337700 03516900 05511900 4 5 6 7 8 9 52709200 07012600 06307000 07412000 05607100 07415300 10 11 12 01014200 06530100 06403600 13 06707100 Hub Cap Spindle Cap Bushing-Sleave .690 x .814 x 1.000 L.H. Axle Assembly Fitting-Lube .25-2 x .256 Washer-Lock .250 x .047 Screw-Tapping .25-20 x .50 Seal 1.125 x 2.496 x .38 Screw-Tapping .312-18 x 1.50 Bearing Flange Nut-Locking-Flange .250-20 Washer-Flat-Steel .880 x 1.380 x .062 Pin-Cotter .12 x 1.0 2 1 2 1 1 1 3 1 2 1 3 ITEM NO. PART NO. DESCRIPTION 14 15 16 17 18 02718100 05800300 05409300 00301700 52708600 19 07115200 20 21 22 07102100 07107700 07412200 01238200 01036600 Right Hand Axle Pin-Roll .188 x 1.25 Bearing Ball .75 x .880 x .50 Bearing Flange Gear Case Assembly (See Next page for detail) Tire/Wheel Assembly #35-16 x 6.50-8 Tire 8 x 6.50 Wheel Indus: #213435493 Screw-Tapping .500-20 x .62 Spindle Cup Pushnut 1 1 14 QTY. 1 1 1 1 1 2 2 2 8 1 1 Solenoid Models 927046,055,056,308,310 Models 927053,054,306,307 6 7 5 2 1 1 2 2 5 4 3 3 4 5 4 6 2 7 ITEM NO. PART NO. DESCRIPTION 1 2 06536700 06306800 3 4 06536800 06310400 5 6 06531000 06220600 Nut-Jam .31-24 Washer-Lock-External .262 x .502 x .026 Nut 10-32 Washer-Lock-External .200 x .402 x .022 Nut-Locking-Nylon .250-20 Bolt-Round Head Square Neck .25-20 x .50 Solenoid 7 03057700 QTY. ITEM NO. PART NO. DESCRIPTION 1 2 06531000 06306800 3 4 03057700 06220600 1 2 5 06310400 2 1 6 7 06536800 06536700 Nut-Locking-Nylon .250-20 Washer-Lock External .262 x .502 x .026 Solenoid Bolt-Round Head Square Neck .25-20 x .50 Washer-Lock External .200 x .402 x .022 Nut 10-32 Nut-Jam .31-24 2 4 1 15 QTY. 2 4 1 2 1 1 2 Gear Case Models 927046,053,054,055,056,306,307,308,310 26 25 27 1 2 24 3 23 4 5 19 10 9 7 6 19 18 20 18 22 21 17 16 8 14 15 11 14 12 ITEM NO. 13 PART NO. DESCRIPTION 1 2 3 4 02503400 00300300 02520600 06306900 5 6 7 06530300 05947200 06301800 8 05511800 9 10 52704200 06600100 11 12 05605100 06408900 13 14 52708500 05403900 Friction Disc Hub Friction Disc Guard Washer-Lock Internal .625 x .045 Nut-Locking Nylon .625-18 Bolt-Hex .31-18 x .50 Gr. 5 Washer-Lock Internal .313 x .030 Bushing Sleeve .875 x 1.125 x 1.046 Differential Assembly Key-Woodruff .188 x .875 x .38 Seal .875 x 1.125 x .125 Washer-Flat-Steel .627 x .990 x .032 Service Gear Case Bearing-Ball .625 x 1.375 x .44 PA0170 QTY. 1 1 1 1 1 5 ITEM NO. PART NO. DESCRIPTION 15 16 17 18 02523400 05803400 02702300 06436000 19 05409000 20 02737000 21 52502700 22 23 24 25 26 02737100 52700500 07415200 00200900 05409100 27 00929100 Pinion Shaft Pin-Roll .125 x .75 Idler Shaft Washer-Flat-Steel .505 x .875 x .024 Bearing-Needle .50 x .688 x .625 Spacer-Cut .640 x .688 x .625 Pinion & Gear w/ Bearing Assembly Gasket Gear Case Cover Assembly Screw-Tapping 10-24 x 1.0 Breather Bearing-Ball 1.125 x 2.50 x .63 Grease Sten Mix 5 1 2 1 1 1 1 2 16 QTY. 1 1 1 2 2 1 1 1 1 4 1 1 1 Electrical Models 927046,053,054,055,056,306,307,308,310 3 1 Regulator Yellow Red Alternator Black 2 Engine Green Red Black Start Electronic Ignition 4 + 5 6 Red Brown S B G M Pink Yellow Pink 7 8 Yellow Yellow Red Red Red Neutral Yellow 10,13 9 Brown Blue Clutch 11 White Black Seat Green Plug PA0130 12 ITEM NO. PART NO. DESCRIPTION 01238500 02759300 Regulator Starter Cable 18” (046,055, 056,308,310) Starter Cable 16” (053,054, 306,307) Battery Ground Cable Starter Cable 13” Solenoid QTY. ITEM NO. 7 1 2 02727900 3 4 5 6 02749400 02518900 02727200 03057700 PART NO. DESCRIPTION 02753600 Wire Harness RM B & S Engines 1 Switch Assembly Switch-Snap Mounting N.O. Module,Interlock, Recoil Adapter - Seat Switch Switch Seat Harness Adapter 1 2 1 1 1 1 1 1 1 1 1 2 1 8 9 10 11 12 13 17 52709300 02754100 08885700 02739700 03171600 02755800 QTY. Mower Height Linkage Models 927046,053,054,055,056,306,307,308,310 1 3 6 2 4 5 7 4 11 8 10 12 14 7 13 9 15 10 20 17 16 18 14 34 33 36 21 7 19 23 24 22 7 37 27 26 38 25 35 31 41 28 30 7 39 16 28 29 10 32 40 44 42 43 32 PA0181 18 Mower Height Linkage Models 927046,053,054,055,056,306,307,308,310 ITEM NO. 1 PART NO. DESCRIPTION 05920900 Screw-Socket Head .31-18 x .75 Washer-Flat-Steel .328 x .875 x .062 Spacer Bushing .5 x .32 x .21 Nut-Locking-Jam .38-16 Rod Pivot Link-Rear Lift Nut-Locking-Center .31-18 Rod-Rear Lift Pin-Cotter .09 x 1.0 Flange Bushing Rear Mower Hanger Bolt-Hex .38-16 x 1.50 Gr.5 Bolt-Round Head Square Neck .38-16 x .75 Positioning Arm (055,308) Adjustment Strap Nut-Locking-Center .38-16 Washer-Lock .375 x .115 Bolt-Hex .38-16 x .75 Gr. 5 Lift Strap Spacer-Shoulder .344 x .500 x .469 x .750 Bolt-Hex .31-18 x 1.25 Gr. 5 Spacer Bushing Washer-Flat-Steel .323 x .625 x .062 2 06439400 3 00607100 4 5 6 7 8 9 10 11 12 13 06537200 09267300 02728800 06529800 02729000 06707000 01212800 02717600 05957900 06211800 14 15 16 17 18 19 20 02719400 02722300 06529600 06306500 05959400 02722200 02519500 21 22 23 05947500 01035800 06436700 QTY. ITEM NO. PART NO. DESCRIPTION 24 25 26 27 28 29 30 05800300 05947000 02715600 02705100 06706900 02728900 06515500 31 32 02737800 06441100 33 34 35 36 37 38 39 40 41 42 07534300 07411900 02758251 07411500 07411600 02754300 06713800 02712900 02748800 06701000 43 44 02508600 02718800 Pin-Roll .188 x 1.25 Bolt-Hex .31-18 x .75 Gr. 5 Mower Lift Arm Strap Pin-Cotter .09 x .75 Link-Front Lift Nut-Cuplg Right Hand & Left Hand Thread .37-16 Link-Front Lift Washer-Flat-Steel .520 x .827 x .062 Knob, 1.4 Dia. .50-13 Screw-Tapping 12-14 x .50 Mower Height Lever Screw-Tapping .31-18 x .50 Screw-Tapping .250-20 x .37 Reinforcement Stop Pin-Cotter .15 x 1.50 Shoulder Bolt Quadrant Pin-Hair Internal .08 x .38 x 1.42 Hanger Pin Front Lift Arm 2 2 2 4 2 2 7 1 4 3 1 1 1 2 1 2 1 1 1 1 1 2 02719700 1 19 QTY. 1 1 1 1 2 1 1 1 4 1 3 1 2 2 1 1 1 1 (046,053,054,056,306,307,310) 2 1 1 1 Front Lift Arm (055,308) 1 Mower Engagement Linkage Models 927046,053,054,055,056,306,307,308,310 35 1 2 3 36 4 17 5 31 32 6 7 8 7 37 33 19 20 18 9 38 39 21 22 23 34 1 1 12 11 13 14 11 40 25 28 45 41 42 24 1 16 41 14 19 16 10 43 44 19 46 1 27 26 30 15 29 28 1 52 17 28 48 47 54 53 1 16 49 28 13 55 19 1 56 57 50 18 51 58 PA0190 20 30 Mower Engagement Linkage Models 927046,053,054,055,056,306,307,308,310 ITEM NO. PART NO. DESCRIPTION 1 2 06529800 06436700 3 4 5 6 7 00325400 00607100 06529600 02720600 06435700 8 08319100 9 10 11 02727100 02721000 06439400 12 06437200 Nut-Locking-Center .31-18 11 Washer-Flat-Steel .323 x .625 x .062 1 Wave Washer (055,308) 1 Spacer Bushing .5 x .32 x .21 1 Nut-Locking-Center .38-16 1 Rod Pivot (051,305) 1 Washer-Flat-Steel .38 x .875 x .083 2 Spring-Compression .148 x .68 x 6.5 (055,308) 1 Clutch Rod (055,308) 1 Arm (055,308) 1 Washer-Flat-Steel .328 x .875 x .062 2 Washer-Flat-Steel .344 x .688 x .065 (55,308) 1 Screw-Tapping .31-18 x .50 3 Bolt-Hex .31-18 x .875 2 Deck Pivot Bracket (055,308) 1 Spacer Bushing 1 Spring-Tension .072 x .51 x 5.31 1 Pin-Cotter .12 x .75 1 Pin-Cotter .09 x .75 3 Clutch Rod Right Hand (055,308) 1 Nut-Jam .38-16 1 Nut-Cuplg Right Hand & Left Hand Thread .37-16 (055,308) 1 Nut Left Hand Thread Gr. 2 .375-16 (055,308) 1 Clutch Rod Left Hand (055,308) 1 Nut .50-13 (055,308) 1 Washer-Lock .500 x .151 (055,308) 1 Front Anchor (055,308) 1 Bolt-Hex .31-18 x .75 Gr. 5 7 Mower Adjustment Bracket 1 Cap Screw (046,053,054,056, 306,308,310) 1 Bolt-Hex .50-13 x 1.25 (055,308) 1 Clutch Rod Service Assembly (055,308) 1 13 14 15 16 17 07411500 05947800 02720400 01035800 08301000 18 19 20 06707300 06706900 02751100 21 22 06529400 06515500 23 06539000 24 02751200 25 26 06537300 06306600 27 28 29 30 02719500 05947000 02709700 02507400 05958900 31 52709500 QTY. ITEM NO. PART NO. DESCRIPTION 32 08309900 33 34 35 36 37 38 39 40 02712900 02715700 07534300 02758351 02704400 01212800 02706800 02705700 Spring-Tension .92 x 69 x 1.75 Shoulder Bolt Shaft Knob, 1.4 Dia. .50-13 Mower Clutch Lever Clutch Arm Flange Bushing Link Clutch Link 41 42 43 02719600 07412000 05801600 02716300 44 06439200 45 02507200 46 47 48 49 07412100 01206300 06437500 02708800 50 51 02705500 02709400 52 53 02509400 06801600 54 02708900 QTY. 1 1 1 1 1 1 1 1 1 (046,053,054,056,306,307,310) Clutch Link (055,308) Screw-Tapping .25-20 x .50 Pin-Roll .188 x 1.00 Adjustment Yoke (046,053,054,056,306,307,310) Washer-Flat-Steel .505 x 1.000 x .062 Lock Spring (046,053,054,056,306,307,310) Screw-Tapping 10-24 x .375 Blade Brake Washer .328 x 1.0 x .094 Brake Bracket 1 2 1 1 1 1 1 1 2 1 1 1 (046,053,054,056,306,307,310) Pivot Bracket (054,056) Mower Engagement Link 1 1 (046,053,054,056,306,307,310) Brake Clip (054,056) Rivet .25 x .50 1 1 (046,053,054,056,306,307,310) Mower Brake Lever 1 (046,053,054,056,306,307,310) 55 02709300 Clevis Pin .306/.311 x 3-1/2 1 (046,053,054,056,306,307,310) 56 02709200 Mower Engaging Arm (046,053,054,056,306,307,310) 57 02709100 Mower Brake Link (046,053,054,056,306,307,310) 52708900 Mower Brake Link Service Assembly 1 1 1 1 1 (046,053,054,056,306,307,310) 58 21 06701000 Pin-Hair Internal .08 x .38 x 1.42 1 Mower Pan Models 927046,053,054,055,056,306,307,308,310 1 2 2 7 8 3 4 6 5 11 9 13 10 12 14 15 16 17 15 18 18 19 26 20 12 24 18 21 27 28 29 25 22 32 31 23 30 PA0201 22 Mower Pan Models 927046,053,054,055,056,306,307,308,310 ITEM NO. 1 2 3 4 5 6 PART NO. DESCRIPTION 06529700 02709500 02202900 06537100 Nut-Locking-Center .250-20 Hinge Plate Bushing (054,056) Nut-Nylon-LockingWing .312-18 Washer-Flat-Steel .328 x .875 x .062 Spring-Tension .095 x .50 x 1.0 (054,056) Spring-Tension .090 x .37 x .63 (046,053,306,307,310) Spring-Tension .090 x .37 x .63 (055,308) Ring-Retaining-External .313 x .025 Pin Rear Mounting Bracket (054,056) Screw-Tapping .31-18 x .50 (54,56) Clevis Pin 3/8 x 2 Pin-Hair Internal .08 x .38 x 1.42 Swivel Bracket Pan Head Chute Extension (054,056) 28” Deflector with Decals (046,053,306,307,310) 32” Deflector with Decals (055,308) Bolt Round Head Square Neck .25-20 x .75 Gr. 5 Bolt Round Head Square Neck .25-20 x 1.00 28” Mower Pan Head with Deflector & Decals (046,053,306,307,310) 06439400 08307200 08318500 08314500 7 05706300 8 9 03624200 02509700 10 07411500 11 12 00212300 06701000 13 14 02708300 02520400 52707000 53508200 15 06219900 16 06219800 17 52708700 QTY. ITEM NO. 4 2 1 PART NO. DESCRIPTION 52708800 28” Mower Pan Head Service Assembly (046,053,306, 307,310) 30” Mower Pan Head with Deflector & Decals (054,056) 30” Mower Pan Head Assembly (054,056) 32” Mower Pan Head with Deflector & Decals (055,308) 32” Mower Pan Head Assembly Retrofit (055,308) Bolt-Round Head Square Neck .31-18 x .62 Nut-Locking-Center .31-18 Nut-Flange .312-18 Pin-Hair .088 x .18 x 1.18 Clevis Pin .368 x .373 x 3.25 Bushing-Flange .372 x .500 x .312 x .750 Roller Clevis (046,053,055 306,307,308,310) Roller (046,053,055,306, 307,308,310) Screw-Tapping .38-16 x .50 Bolt-Hex .38-16 x 1.25 Gr. 5 Nut-Hex-Jam .375-16 Nut-Locking-Center .38-16 Bolt-Hex .38-16 x 1.00 Gr. 5 Adjusting Arm Front Bracket 30” (054,056) 52702200 1 1 52709400 1 52709600 1 52709700 1 1 1 2 4 1 1 1 18 06212200 19 20 21 22 23 06529800 06530400 06713500 02747500 05503600 24 02747600 25 02745400 26 27 28 29 30 31 32 07412900 05958000 06535900 06529600 05948700 02736600 02736800 1 1 1 4 1 1 23 QTY. 1 1 1 1 1 7 2 4 4 4 8 4 4 3 1 1 1 1 1 1 Mower Spindle Models 927046,053,054,055,056,306,307,308,310 1 1 2 2 3 3 4 5 6 7 12 13 14 17 16 20 21 20 29 10 18 19 17 25 22 30 24 23 8 9 11 15 21 24 4 27 26 31 28 32 34 33 30 35 37 21 36 38 39 40 42 43 44 41 PA0210 24 Mower Spindle Models 927046,053,054,055,056,306,307,308,310 ITEM NO. 1 2 3 4 PART NO. DESCRIPTION 06539900 Nut-Center-Locking-Jam .75-16 Washer-Lock .750 x .188 Mower Sheave (054,056) Mower Sheave (046,053, 306,307,310) Mower Sheave (055,308) Mower Belt Finger (046,053,054,306,310) Belt-Finger (055,308) Nut-Flange .312-18 Fastener (055,308) Brake Band (055,308) Spring-Compression .072 x .687 x .75 Washer-Flat-Steel .344 x .688 x .065 Nut-Hex .31-18 Washer-Flat-Steel .630 x 1.005 x .062 Nut-Locking-Center .31-18 Nut-Hex .38-16 Washer-Lock .38 x .094 Washer-Flat-Steel .390 x .750 x .125 Idler 3.06 x .38 (055,308) Washer-Flat-Steel .38 x .875 x .083 Idler (055,308) Bearing Spacer (055,308) Belt Finger (055,308) Nut-Locking-Center .375-16 Bolt-Hex .31-18 x 1.50 Gr. 5 Bolt-Hex .38-16 x 1.75 Gr. 5 Washer-Flat-Steel .406 x .812 x .065 Washer-Flat-Steel .406 x 1.000 x 1.88 Idler Arm (055,308) 06310300 02719000 02750200 02747800 01206100 5 6 7 8 02721100 06530400 01019900 02740300 08312000 9 06437200 10 11 06529200 06436100 12 13 14 15 06529800 06529400 06308800 06444300 16 17 07310900 06435700 18 19 01213200 01213100 20 21 22 23 24 02720700 06529600 05952400 05958500 06436200 0644400 25 02740400 QTY. ITEM NO. PART NO. DESCRIPTION Washer-Flat-Steel .382 x .812 x .062 Pin (055,308) Pin Roll .125 x .63 (055,308) Plate (054,056) Bearing Ball .750 x 1.78 x .61 Spindle Housing 26 06437100 1 1 1 27 28 02752900 05804800 1 1 29 30 02527600 05412000 1 1 2 1 1 31 02746700 (046,053,055,306,307,308,310) 00317200 32 33 05948700 03526700 02746800 34 35 36 37 38 06600300 05960700 06534700 00341900 00316900 02746900 39 00317000 02747100 40 02749300 1 1 2 1 1 1 1 1 1 3 1 1 2 5 1 1 QTY. 02728700 41 42 02747000 05948700 06408300 43 44 06310700 05967500 4 2 1 25 Spindle Housing (054,056) Bolt-Hex .38-16 x 1.00 Gr. 5 Spindle Shaft (054,056) Spindle Shaft (046,053, 055,306,307,308,310) Key Woodruff .188 x .75 Bolt-Hex .38-24 x 1.25 Gr. 5 Nut-Jam .375-24 Bearing Slinger Retainer Hub (054,056) Hub (046,053,055,306, 307,308,310) Blade Tray (054,056) Blade Tray Weldment (046, 053 ,055,306,307,308,310) 28” Mower Blade (046,053,306,307,310) Mower Blade 30 Inches (054,056) 32” Blade (055,308) Bolt-Hex .38-16 x 1.00 Gr. 5 Washer-Flat-Steel .505 x 1.140 x .250 Washer-Lock .438 x .133 Bolt-Hex .44-20 x 1.75 Gr. 5 1 1 1 2 1 1 6 1 1 2 2 2 1 1 1 1 1 1 1 1 2 1 1 1 GRAVELY A Division of Ariens Company 655 West Ryan Street P.O. Box 157 Brillion, WI 54110-0157 920-756-2141 Fax 920-756-2407 www.gravely.com