Download American Standard Town Square Pressure Balance Bath/Shower Fitting 555.652 User's Manual

TOWN SQUARE®
PRESSURE BALANCE BATH/SHOWER FITTING
WITH BUILT-IN DIVERTER
MODEL NUMBER:
2555.602 Pressure Balance Bath/Shower
Built-in diverter. “Rain” showerhead. Brass tub spout.
For wall mount installation.
2555.652 Pressure Balance Bath/Shower
Built-in diverter. “Rain” showerhead. Brass tub spout.
For deck mount installation.
41mm to 83mm
(1-5/8" to 3-1/4")
FINISHED WALL
25mm
(1")
2555.602
2555.652
1/2" I.P.S.
51mm
(2") REF.
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
1651mm to 1981mm
(65'' AND 78'')
GENERAL DESCRIPTION:
Cast brass valve body. Washerless 47mm ceramic disc
valve cartridge cycles from “Off” to “Cold” to “Hot”. Hot
limit safety stop. Pressure balancing cartridge maintains
constant output temperature in response to changes in
relative hot and cold supply pressures. 1/2" NPT threaded
inlets/outlets with screwdriver stops. 4-1/2" easy clean
"Rain" showerhead has 2.5gpm/9.5L/min. flow restrictor.
Cast brass shower arm. Integral diverter. Durable brass
wall escutcheon. Metal lever handle. Rough-in plaster
guard designed for use as thin-wall mounting adaptor.
Brass tub spout.
203mm
(8") REF.
1880mm
(74") FOR
HEAD CLEARANCE
SHW
"SEE ILLUSTRATION"
191mm
(7-1/2")
OUTLETS 1/2" NPT
TUB
457mm
(18" )
OPTIONAL
PRODUCT FEATURES:
44mm
(1-3/4")
143mm
(5-5/8")
184mm
(7-1/4") REF.
Solid Brass Construction: Durable, ideal material for
prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of
102mm
(4")
drip-free performance.
Pressure Balancing Valve:
Maintains output
temperature in response to changes in relative hot and
cold supply pressure. Diaphragm system engineered to
eliminate cross flow and spool “thumping”. Avoids failure
due to mineral deposits - ideal for use with hard water.
BOTTOM OF
TUB
210mm
(8-1/4")
and includes positive shut-off. Allows spout and
showerhead in any desired installation location.
Adjustable Hot Limit Safety Stop:
78mm
(3-11/16")
Integral Plaster Guard and Mounting Plate:
Plaster guard designed to protect valve during installation
and to serve as a mounting plate for thin wall installations.
143mm
(5-5/8")
THREADED INLETS (STOPS)
TOP OF
TUB RIM
Built-in Diverter: Easy to use, integrated in valve body
Limits the
amount of hot water allowed to mix with cold. Reduces
the risk of accidental scalding.
1/2" NPT
25mm INLETS
(1")
1/2" NPT
38mm
(1-1/2")
MAX.
OR
76mm
(3")
SPOUT MTG.
SURFACE
1/2" NPT
BOTTOM OF
TUB
1/2" NPT
SUGGESTED SPECIFICATION:
Bath/shower fitting shall be cast brass construction with all brass spout and showerhead. Shall also feature washerless
ceramic disc valve cartridge which allows user to control water temperature. Fitting shall be equipped with a pressure balancing
mechanism and hot limit safety stop. Fitting shall be American Standard Model # 2555.____.____.
PRESSURE BALANCE BATH/SHOWER
© 2008 AS America Inc.
B17
TOWN SQUARE®
PRESSURE BALANCE BATH/SHOWER FITTING
WITH BUILT-IN DIVERTER
CODES AND STANDARDS
FLOW RATE*
Spout
Shower
8
GALLONS PER MINUTE
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
ASSE 1016
6
4
2
0
20
40
60
80
100
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
Finish Options
Product
Number
2555.602
PVD
Polished Blackened
Chrome Bronze
Description
002
Pressure Balance Bath/Shower w/built-in diverter.
"Rain" showerhead. Brass tub spout for wall mount installation.
2555.652 Pressure Balance Bath/Shower w/built-in diverter.
"Rain" showerhead. Brass tub spout for deck mount installation..
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
© 2008 AS America Inc.
B18
068
PVD
Satin
Nickel
295