Download American Standard Town Square Pressure Balance Bath/Shower Fitting 555.652 User's Manual
Transcript
TOWN SQUARE® PRESSURE BALANCE BATH/SHOWER FITTING WITH BUILT-IN DIVERTER MODEL NUMBER: 2555.602 Pressure Balance Bath/Shower Built-in diverter. “Rain” showerhead. Brass tub spout. For wall mount installation. 2555.652 Pressure Balance Bath/Shower Built-in diverter. “Rain” showerhead. Brass tub spout. For deck mount installation. 41mm to 83mm (1-5/8" to 3-1/4") FINISHED WALL 25mm (1") 2555.602 2555.652 1/2" I.P.S. 51mm (2") REF. OPTIONAL TO FINISHED FLOOR USUALLY BETWEEN 1651mm to 1981mm (65'' AND 78'') GENERAL DESCRIPTION: Cast brass valve body. Washerless 47mm ceramic disc valve cartridge cycles from “Off” to “Cold” to “Hot”. Hot limit safety stop. Pressure balancing cartridge maintains constant output temperature in response to changes in relative hot and cold supply pressures. 1/2" NPT threaded inlets/outlets with screwdriver stops. 4-1/2" easy clean "Rain" showerhead has 2.5gpm/9.5L/min. flow restrictor. Cast brass shower arm. Integral diverter. Durable brass wall escutcheon. Metal lever handle. Rough-in plaster guard designed for use as thin-wall mounting adaptor. Brass tub spout. 203mm (8") REF. 1880mm (74") FOR HEAD CLEARANCE SHW "SEE ILLUSTRATION" 191mm (7-1/2") OUTLETS 1/2" NPT TUB 457mm (18" ) OPTIONAL PRODUCT FEATURES: 44mm (1-3/4") 143mm (5-5/8") 184mm (7-1/4") REF. Solid Brass Construction: Durable, ideal material for prolonged contact with water. Ceramic Disc Valve Cartridge: Assures a lifetime of 102mm (4") drip-free performance. Pressure Balancing Valve: Maintains output temperature in response to changes in relative hot and cold supply pressure. Diaphragm system engineered to eliminate cross flow and spool “thumping”. Avoids failure due to mineral deposits - ideal for use with hard water. BOTTOM OF TUB 210mm (8-1/4") and includes positive shut-off. Allows spout and showerhead in any desired installation location. Adjustable Hot Limit Safety Stop: 78mm (3-11/16") Integral Plaster Guard and Mounting Plate: Plaster guard designed to protect valve during installation and to serve as a mounting plate for thin wall installations. 143mm (5-5/8") THREADED INLETS (STOPS) TOP OF TUB RIM Built-in Diverter: Easy to use, integrated in valve body Limits the amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding. 1/2" NPT 25mm INLETS (1") 1/2" NPT 38mm (1-1/2") MAX. OR 76mm (3") SPOUT MTG. SURFACE 1/2" NPT BOTTOM OF TUB 1/2" NPT SUGGESTED SPECIFICATION: Bath/shower fitting shall be cast brass construction with all brass spout and showerhead. Shall also feature washerless ceramic disc valve cartridge which allows user to control water temperature. Fitting shall be equipped with a pressure balancing mechanism and hot limit safety stop. Fitting shall be American Standard Model # 2555.____.____. PRESSURE BALANCE BATH/SHOWER © 2008 AS America Inc. B17 TOWN SQUARE® PRESSURE BALANCE BATH/SHOWER FITTING WITH BUILT-IN DIVERTER CODES AND STANDARDS FLOW RATE* Spout Shower 8 GALLONS PER MINUTE These products meet or exceed the following codes and standards: ANSI A117.1 ASME A112.18.1 CSA B 125 ASSE 1016 6 4 2 0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. Finish Options Product Number 2555.602 PVD Polished Blackened Chrome Bronze Description 002 Pressure Balance Bath/Shower w/built-in diverter. "Rain" showerhead. Brass tub spout for wall mount installation. 2555.652 Pressure Balance Bath/Shower w/built-in diverter. "Rain" showerhead. Brass tub spout for deck mount installation.. Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged. © 2008 AS America Inc. B18 068 PVD Satin Nickel 295