Transcript
ANTIQUITY™ ROUND FRONT TOILET VITREOUS CHINA ANTIQUITY™ ROUND FRONT TOILET ❑ 2264.017 •Vitreous china •Low-consumption (6.0 Lpf/1.6 gpf) •Round front siphon action bowl •Close-coupled tank •Turn-of-the-Century detailing on tank and bowl •Side-mounted antique chrome trip lever with ceramic handle insert •2 bolt caps •Internal trapway area fully glazed •100% factory flush tested • Design-matched to Antiquity Lavatories ❑ 3093.013 Bowl ❑ 4094.015 Tank Nominal Dimensions: 718 x 470 x 762mm (28-1/4" x 18-1/2" x 30") FINISHED WALL Fixture only, seat and supply by others 470mm (18-1/2) 216mm (8-1/2) C/L OF SEAT POST HOLES (140mm CENTERS) (5-1/2) Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2M for Vitreous China Fixtures includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions C/L 419mm (16-1/2) 406mm (16) SUPPLY AS REQUIRED 89mm (3-1/2) To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black ❏ Seat: American Standard #5322.011 “Rise and Shine” solid plastic closed front seat with cover. ❏ Alternate Seat: American Standard #5308.014 “Laurel” molded closed front seat with cover. ❏ Supply with stop: 718mm (28-1/4) 25mm ± 6mm (1 ± 1/4) 381mm (15) ? 13mm (1/2) 330mm (13) *152mm (6) 762mm (30) *203mm (8) FINISHED FLOOR 241mm (9-1/2) 159mm (6-1/4) 305mm (12) NOTES: THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED. *SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. © 2008 AS America Inc. K50 Revised 2/08