Download American Standard Skyline Champion 2112.014 User's Manual

SKYLINE CHAMPION® 4
ROUND FRONT TOILET
VITREOUS CHINA
SKYLINE CHAMPION ® 4
ROUND FRONT TOILET
❏ 2112.014
• Vitreous china
•EverClean® surface inhibits the growth of stain
and odor causing bacteria, mold and mildew on
the surface
•Low-consumption (6.0 Lpf/1.6 gpf)
• Features Champion® 4 Flushing System
performance platform
•4" non-adjustable, piston action Accelerator™
flush valve
• Round Front siphon action jetted bowl
• 2-3/8" fully-glazed trapway
• Speed Connect ® tank/bowl coupling system
• Chrome-plated trip lever
• Sweeping pier on bowl
• 100% factory flush tested
• 2 bolt caps
• 10 year warranty
FINISHED WALL
721mm
(28-3/8)
❏ 3110.016 Round Front Bowl
❏ 4077.014 Tank
32mm ± 6mm
(1-1/4 ± 1/4)
Nominal Dimensions:
28-3/8" x 19-5/8" x 33-1/8"
(721 x 498 x 841mm)
To Be Specified:
❏ Color: 020 White
❏ Seat: (please specify color)
❏ Champion ® Slow Close
Round Front #5330.010
❏ Rise & Shine Round Front #5322.011
❏ Laurel Round Front #5308.014
❏ Supply with stop:
© 2008 AS America Inc.
419mm
(16-1/2)
356mm
(14)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
841mm
(33-1/8)
SUPPLY
AS
REQ'D
83mm
(3-1/4)
Fixture only, seat and supply by others
Compliance Certifications Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
- includes Flush Performance, Ball Pass
Diameter, Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for NonAdjustability - July, 2003 revision
498mm
(19-5/8)
235mm
(9-1/4)
387mm
(15-1/4)
254mm
(10)
152mm
(6)
16mm
(5/8)
264mm
(10-3/8)
305mm
(12)
362mm
(14-1/4)
FINISHED
FLOOR
254mm
(10)
C/L OF OUTLET
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided page
K31
Revised 2/08
© 2008 AS America Inc.
K32
Revised 2/08