Transcript
REMINISCENCE™ ELONGATED TOILET VITREOUS CHINA REMINISCENCE™ ELONGATED TOILET ❑ 2011.026 •Vitreous china •Low-consumption (6.0 Lpf/1.6 gpf) •Elongated siphon action jetted bowl with 2" trapway •AquaForce flushing technology •Bowl rim height at 381mm (15") •Vintage detailing on bowl and tank–design matched to pedestal and countertop lavatories •Side-mounted antique styled chrome trip lever with ceramic handle insert •2 bolt caps •Internal trapway area fully glazed •100% factory flush tested ❑ 3311.028 Bowl ❑ 4111.016 Tank Shown with 5311.012 “Laurel” seat Nominal Dimensions: 768 x 508 x 826mm (30-1/4" x 20" x 32-1/2") FINISHED WALL 768mm (30-1/4) 25mm ± 6mm (1 ± 1/4) Fixture only, seat and supply by others 508mm (20) 229mm (9) Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions C/L OF SEAT POST HOLES (140mm CENTERS) (5-1/2) C/L 476mm (18-3/4) 406mm (16) SUPPLY AS REQUIRED 381mm (15) 76mm (3) To Be Specified: ❏ Color: ❏ Seat: American Standard #5324.019 “Rise and Shine” solid plastic closed front seat with cover. ❏ Alternate Seat: American Standard #5311.012 “Laurel” molded closed front seat with cover. ❏ Supply with stop: 13mm (1/2) 305mm (12) 363mm (14-1/2) 159mm (6-1/4) 826mm (32-1/2) *(8-3/4) 222mm *140mm (5-1/2) FINISHED FLOOR 279mm (11) C/L OF OUTLET NOTES: THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED. *SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. © 2008 AS America Inc. K42 Revised 2/08
