Download American Standard Neolo Elongated Flush Valve Toilet 2531.016 User's Manual

NEOLO™
ELONGATED FLUSH VALVE TOILET
VITREOUS CHINA
NEOLO™ ELONGATED FV TOILET
• Elongated flush valve toilet
• Vitreous china
• Low consumption (6.0 Lpf/1.6gpf)
• Wall outlet elongated bowl, angle back and base
• Siphon jet flush action
• Fully glazed 2" ballpass trapway
• 10" x 13" water surface area
• 1-1/2" inlet spud
• 4 bolt caps
• 100% factory flush tested
❏ 2529.016 Elongated bowl only, top spud,
wall outlet
❏ 2530.016 Elongated bowl only, back spud, wall outlet
❏ 2531.016 Elongated bowl only, back spud, wall outlet, integral seat
Nominal Dimensions:
673 x 375 x 375mm
(26-1/2" x 14-3/4" x 14-3/4")
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
Recommended working pressure – between
30 psi at valve when flushing and 80 psi static
Fixture only, less seat, bolt caps, and flush valve
Compliance Certifications Meets or Exceeds the Following Specifications:
• ASME A112.19.2 for Vitreous China Fixtures
To Be Specified:
❏ Color: ❏ White
❏ Seat: Olsonite #95 open front seat less cover
❏ Seat: Church #9500C open front seat less cover
❏ Seat: Pressalit seats for American Standard,
closed front seat with cover (thermoset
compound material).
❏ Alternate Seat:
❏ Flush Valve:
❏ American Standard Selectronic™ #6065.161.002
DC Power(Top Spud)
❏ American Standard Selectronic™ #6065.262.007
DC Power (Back Spud)
❏ American Standard Selectronic™ #6067.262.007
AC Power (Back Spud)
❏ American Standard Selectronic™ #6068.262.007
Multi AC Power (Back Spud)
© 2008 AS America Inc.
M51
Revised 11/08
NEOLO™
ELONGATED FLUSH VALVE TOILET
VITREOUS CHINA
2529.016
2530.016
1" N.P.T. OR C.W.T.
SUPPLY TO FLUSH VALVE
FINISHED WALL
673mm
(26-1/2)
1-1/2" SPUD
76mm
(3)
FINISHED WALL
121 mm
(4-3/4)
673mm
(26-1/2)
375mm
(14-3/4)
C/L OF SEAT POST HOLE
140mm (5-1/2) CENTERS
470mm
(18-1/2)
C/L OF SEAT POST HOLE
140mm (5-1/2) CENTERS
(2530.016)
13mm(1/2)
375mm
(14-3/4)
470mm
(18-1/2)
660mm
(26)
70mm (2-3/4)
DIA. HOLE
IN WALL
C/L OF
OUTLET
375mm
(14-3/4)
INTEGRAL SEAT
(2531.016)
375mm
(14-3/4)
1-1/2"
SPUD
13mm
(1/2)
225mm
(8-7/8)
C/L OF
OUTLET
375mm
(14-3/4)
152mm
(6)
152mm
(6)
108mm
(4-1/4)
108mm
(4-1/4)
267mm
(10-1/2)
521mm
(20-1/2)
FINISHED
FLOOR
222mm
(8-3/4)
191mm (7-1/2)
DIA. HOLE
IN WALL
267mm
(10-1/2)
521mm
(20-1/2)
C/L OF 1/2" DIA. BOLT
HOLES ON 140mm (5-1/2) CENTERS
FINISHED
FLOOR
222mm
(8-3/4)
C/L OF 1/2" DIA. BOLT
HOLES ON 140mm (5-1/2) CENTERS
NOTES:
WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITEFELT (WAX RING NOT RECOMMENDED).
TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM
BREAKER ON FLUSH VALVE, THE PLUMBER MUST VERIFY
DIMENSIONS SHOWN FOR SUPPLY ROUGHING.
FLUSH VALVE NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
© 2008 AS America Inc.
M52
Revised 11/08