Download American Standard Lucerne Wall Hung Lavatory 0356.439 User's Manual

LUCERNE™
WALL-HUNG LAVATORY
VITREOUS CHINA
BARRIER FREE
LUCERNE™ WALL-HUNG LAVATORY
• Wall-hung sink
• Vitreous china
• Front overflow
• “D” shaped bowl
• Self-draining deck area with contoured back
and side splash shields
• Faucet ledge
Both shown with 1340.000 metering faucet
(not included)
Single faucet hole on right:
❏ 0356.066 For exposed bracket support
❏ 0356.439 For wall hanger (included) or
concealed arms support
Nominal Dimensions:
521 x 464mm
(20-1/2" x 18-1/4")
Bowl sizes:
381mm (15") wide
254mm (10") front to back
171mm (6-3/4") deep
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
Compliance Certifications Meets or Exceeds the Following Specifications:
• ASME A112.19.2 for Vitreous China Fixtures
To Be Specified:
❏ Colors: ❏ White ❏ Black
❏ Faucet*:
❏ Gooseneck Spout: 7522.055
❏ Faucet Finish:
❏ Knee Action Mixer: 7676.029
❏ Double Pedal Valve: 7679.012 (wall mounted)
❏ Grid Drain: 2411.015
❏ Trap:
❏ Nipple:
❏ Bracket Support (by others):
❏ Flex Tempered Supply (by others):
❏ Concealed Arms Support (by others):
❏ 6065161.002 Selectronic Valve (1.6 GPF Toilet)
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Top of front rim mounted 864mm (34") from finished floor.
* See faucet section for additional models available
© 2008 AS America Inc.
M23
Revised 8/05
LUCERNE™
WALL-HUNG LAVATORY
VITREOUS CHINA
BARRIER FREE
35mm (1-3/8) DIA.
PUNCHING
349mm
(13-3/4)
86 mm
(3-3/8)
114 mm
(4-1/2)
203 mm
(8)
FINISHED
WALL
13mm x 51mm BRACKET
(1/2 x 2) SLOTS
464 mm
(18-1/4)
44mm (1-3/4) DIA.
STD. OUTLET
102 mm
(4)
25mm (1) DIA.
HOLES
8 mm
(5/16)
57mm
(2-1/4)
425 mm
(16-3/4)
13 mm
(1/2)
521 mm
(20-1/2)
425 mm
(16-3/4)
267 mm
(10-1/2)
114 mm
(4-1/2)
102 mm 44 mm
(1-3/4)
(4)
25 mm
(1)
54mm (2-1/8) DIA.
HOLES FOR
CONCEALED ARMS
79 mm
(3-1/8)
206 mm
(8-1/8)
38 mm
(1-1/2)
10mm (3/8)
DIA. ANCHOR
SCREW HOLES
S-9 HANGER
787mm (31)
864mm (34)
27mm X 14mm
(1-1/16 x 5/16) SLOTS
FINISHED
FLOOR
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Top of front rim mounted 864mm (34") from finished floor.
NOTES:
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
CONCEALED ARMS SUPPORT AND EXPOSED BRACKET SUPPORT AS
REQUIRED TO BE FURNISHED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
© 2008 AS America Inc.
M24
Revised 8/05