Transcript
CHAMPION® 4 ELONGATED RIGHT HEIGHT™ ONE-PIECE TOILET VITREOUS CHINA CHAMPION ® 4 ELONGATED RIGHT HEIGHT™ ONE-PIECE TOILET ❑ 2034.014 • Vitreous china • EverClean® surface inhibits the growth of stain- and odor-causing bacteria, mold, and mildew on the surface • Low-consumption (6.0 Lpf/1.6 gpf) • Features Champion® 4 Flushing System performance platform • 4" non-adjustable, piston action Accelorator™ flush valve • 16-1/2" rim height for accessible applications • Elongated siphon action jetted bowl • 2-3/8" fully-glazed trapway • Chrome trip lever • 100% factory flush tested • 2 bolt caps • 10 year warranty FINISHED WALL Nominal Dimensions: 756 x 451 x 749mm (29-3/4" x 17-3/4" x 29-1/2") 44mm (1-3/4) 203mm (8) 756mm (29-3/4) C/L OF SEAT POST HOLES 140mm (5-1/2) CENTERS 425mm (16-3/4) 470mm (18-1/2) Fixture only, seat and supply by others Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2M for Vitreous China Fixturesincludes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black ❏ Trip Lever 738772-XXX0A: ❏ 002 Chrome (supplied) ❏ 068 Blackened Bronze ❏ 099 Polished Brass ❏ 295 Satin Nickel ❏ Seat: ❏ Champion ® Slow Close Elongated #5325.010 ❏ EverClean ® Elongated Seat, with Cover and Slow Close Snap-Off Hinges #5321.110 ❏ Supply with Stop (by other): 25mm (1) SUPPLY AS REQ'D 419mm (16-1/2) 95mm (3-3/4) 32mm (1-1/4) 273mm (10-3/4) 305mm (12) 13mm (1/2) 343mm (13-1/2) 451mm (17-3/4) 749mm (29-1/2) 178mm (7) *114mm (4-1/2) FINISHED FLOOR 273mm (10-3/4) C/L OF OUTLET NOTES: THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. * DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES. When installed, top of seat meets minimum requirement of 432 to 483mm (17" to 19") from the finished floor. • © 2008 AS America Inc. K8 Revised 2/08
