Download American Dryer Corp. ML-175 User's Manual

ML-175
Parts Manual
1999/2001
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: [email protected]
www.amdry.com
122199DMG/tcosta
ADC Part No. 450071
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________
ML-175
MODEL NO. __________________________________________
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s)
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory,
you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that
your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
Table of Contents
Control Door Assembly .......................................................................................................................... 2
Microprocessor Control Panel Assembly................................................................................................. 3
Front Panel Assembly ............................................................................................................................. 4
Cold Rolled Steel (CRS) Main Door Assembly ....................................................................................... 5
Main Door Switch Assembly................................................................................................................... 6
Lint Door Assembly ................................................................................................................................ 7
Lint Drawer/Lint Drawer Switch Box Assemblies
For Models Mfd. as of August 14, 2000 ........................................................................................... 8
Lint Drawer/Lint Drawer Switch Box Assemblies
For Models Mfd. prior to August 14, 2000 Which Have Individual Lint Screen and Drawer............... 9
Fan (Squirrel Cage) Shaft Mount Assembly ........................................................................................... 10
Blower Motor Mount Assembly .............................................................................................................11
Microprocessor Temperature Sensor Bracket Assembly ........................................................................ 12
Basket (Tumbler) Assembly .................................................................................................................. 13
Basket (Tumbler) Bearing/Rotational Sensor Assemblies ........................................................................ 14
Drive Shaft Assembly............................................................................................................................ 15
Idler Shaft Assembly ............................................................................................................................. 16
Speed Reducer Shaft Assembly ............................................................................................................ 17
Totally Enclosed, Non-Venting (T.E.N.V.) Drive Motor Assembly.......................................................... 18
Sail Switch Assembly ............................................................................................................................ 19
Direct Spark Ignition (DSI) Burner Assembly .................................................................................. 20, 21
Hot Surface Ignition (HSI) Burner Assembly ................................................................................... 22, 23
Steam Damper Assembly ................................................................................................................ 24, 25
Top Console Assembly ......................................................................................................................... 26
Pneumatic Valve Assembly
For Gas Models Only ..................................................................................................................... 27
Pneumatic Valve Assembly
For Steam Models Only ................................................................................................................. 28
Air Jet Assembly................................................................................................................................... 29
Microprocessor Reversing Contactor Mounting Panel Assembly
208-240v ................................................................................................................................. 30, 31
Microprocessor Reversing Contactor Mounting Panel Assembly
460v and 575v ......................................................................................................................... 32, 33
Back Guard Assemblies .................................................................................................................. 34, 35
Control Door Assembly
2
Illus. No.
Part No.
Qty.
1
882495
1
882493
882496
1
1
882494
882541
117603
150309
102603
102601
102505
112368
1
2
5
9
1
1
1
1
2
3
4
5
6
7
8
American Dryer Corporation
Description
White Control Door Assembly
(includes illus. nos. 1 through 3)
White Control Door ONLY
Coral Wrinkle Blue Control Door Assembly
(includes illus. nos. 1 through 3)
Coral Wrinkle Blue Control Door ONLY
Spring Turn Latch (2-piece)
Noise Suppressor Tape (sold by the foot)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Control Door Support Rod Catch
Control Door Rod Retainer Clip
Control Door Support Rod
Milnor Logo ONLY
88 Currant Road / Fall River, MA 02720-4781
Microprocessor Control Panel Assembly
Illus. No.
Part No.
Qty.
1
112537
112276
1
1
112275
1
112277
1
112278
1
2
881635
1
3
881633
137124
1
1
4
5
6
7
8
9
10
150005
153010
150000
150309
136048
136017
136019
2
2
3
1
1
1
1
Telephone: (508) 678-9000
3
Description
Phase 6 OPL Keyboard
OPL Stick-On Labels
(English Only) ... Not Illustrated
3-Language OPL Stick-On Labels
(Spanish, Italian, and Hebrew) ... Not Illustrated
3-Language OPL Stick-On Labels
(English, Spanish, and Hebrew) ... Not Illustrated
5-Language OPL Stick-On Labels
(Italian, Dutch, French, German, and Chinese) ... Not Illustrated
Computer Door Complete
(includes illus. nos. 1 through 10)
Computer Door ONLY
Phase 6 OPL Reversing Microprocessor Controller (computer)
with Air Jet ONLY
#6-32 x 1/4” Phillips Round Head Machine Screw
#6 Star Washer
#6-32 x 1/4” Slotted Round Head Machine Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1/8-Amp (Slo-Blo) Fuse ONLY
3.15-Amp Fuse ONLY
1-Amp Fuse ONLY
Fax: (508) 678-9447
Front Panel Assembly
4
Illus. No.
Part No.
Qty.
1
--------
1
2
3
150443
--------
2
1
4
5
6
153031
150443
--------
1
2
1
7
8
9
10
882503
882504
122351
122419
--------
1
1
1
1
1
11
12
13
14
15
132387
132395
170330
154215
150317
1
1
1
2
14
150318
150311
1
14
American Dryer Corporation
Description
Cold Rolled Steel (CRS) Main Door
(refer to Cold Rolled Steel [CRS] Main Door Assembly on page 5)
1/4-20 x 3/4” Stainless Steel Cap Screw
Bottom Hinge Block
(refer to Main Door Switch Assembly on page 6)
Nylon Washer
1/4-20 x 3/4” Stainless Steel Cap Screw
Top Hinge Block
(refer to Main Door Switch Assembly on page 6)
White Front Panel ONLY
Wrinkle Coral Blue Front Panel ONLY
Large “EMERGENCY STOP” (E-Stop) Mushroom Head Switch
“EMERGENCY STOP” (E-Stop) Nameplate
Main Door Switch
(refer to Main Door Switch Assembly on page 6)
Normally Closed Contact Block
Normally Closed Contact Block with Base
Friction Door Latch
5/32” Pop Rivet
#10-16 x 3/4” TORX Plus Button Head Screw
(for models mfd. as of September 29, 2000)
25 IP Stick Fit TORX Plus Bit (must be used to remove P/N 150317)
#10-16 x 3/4” Phillips Hex Head Screw
(for models mfd. prior to September 29, 2000)
88 Currant Road / Fall River, MA 02720-4781
Cold Rolled Steel (CRS) Main Door Assembly
Illus. No.
Part No.
Qty.
1
881689
1
882292
1
881684
882305
102214
170730
881685
882296
881740
882294
881688
882295
881806
882293
152008
150120
882411
151012
1
1
1
1
1
1
6
6
1
1
6
6
1
1
1
4
2
3
4
5
6
7
8
9
10
Telephone: (508) 678-9000
5
Description
White Cold Rolled Steel (CRS) Main Door Assembly
(includes illus. nos. 2 through 10)
Coral Blue Cold Rolled Steel (CRS) Main Door Assembly
(includes illus. nos. 2 through 10)
White Cold Rolled Steel (CRS) Main Door Ring
Coral Blue Cold Rolled Steel (CRS) Main Door Ring
30” Door Glass
Door Glass Adhesive (10.3 oz. cartridge)
White Main Door Hinge
Coral Blue Main Door Hinge
1/4-20 x 5/8” White Carriage Bolt
1/4-20 x 5/8” Coral Blue Carriage Bolt
White Main Door Handle
Coral Blue Main Door Handle
1/4-20 White Free Spin Wash Nut
1/4-20 Coral Blue Free Spin Wash Nut
#10-32 Hex Nut
Door Latch Screw
Door Gasket
#10-32 White Nylon Acorn Nut
Fax: (508) 678-9447
Main Door Switch Assembly
6
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
150006
152013
153010
137005
150443
881687
882291
881702
2
2
2
1
4
1
1
1
882298
1
150443
881441
882283
881440
882284
153031
2
1
1
1
1
1
7
8
9
10
American Dryer Corporation
Description
#6-32 x 7/8” Phillips Pan Head Machine Screw
#6-32 Hex Nut
#6 Star Washer
Single-Pole Door Switch
1/4-20 x 3/4” Stainless Steel Cap Screw
White Main Door Switch Housing ONLY
Coral Wrinkle Blue Main Door Switch Housing ONLY
White Main Door Switch with Housing Assembly
(includes illus. nos. 1 through 4 and 6)
Coral Wrinkle Blue Main Door Switch Housing Assembly
(includes illus. nos. 1 through 4 and 6)
1/4-20 x 3/4” Stainless Steel Cap Screw
White Bottom Hinge Block
Coral Wrinkle Blue Bottom Hinge Block
White Top Hinge Block
Coral Wrinkle Blue Top Hinge Block
Nylon Washer
88 Currant Road / Fall River, MA 02720-4781
Lint Door Assembly
Illus. No.
Part No.
Qty.
1
882497
1
882498
1
117607
150309
117604
6
5
9
2
3
4
Telephone: (508) 678-9000
7
Description
White Lint Door Assembly
(includes illus. nos. 1, 2, and 4)
Coral Wrinkle Blue Lint Door Assembly
(includes illus. nos. 1, 2, and 4)
1/4” x 3/8” Poron Foam (sold by the foot)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Neoprene Sponge Tape (sold by the foot)
Fax: (508) 678-9447
Lint Drawer/Lint Drawer Switch Box Assemblies
8
For Models Mfd. as of August 14, 2000
Illus. No.
Part No.
Qty.
1
5
882792
882793
122116
122605
122701
122801
882507
1
1
1
1
2
1
1
6
7
8
9
10
11
12
150301
122700
122604
150301
319076
319077
150301
4
2
1
2
1
1
14
2
3
4
American Dryer Corporation
Description
White Lint Drawer/Screen Assembly
Coral Wrinkle Blue Lint Drawer/Screen Assembly
Lint Drawer Switch ONLY
4-Pin Socket Connector
Socket Terminal ONLY
Pin/Socket Extraction Tool
Lint Drawer Switch Box Assembly Complete
(includes illus. nos. 3 through 6)
#8-18 x 7/16” Phillips Pan Head TEK Screw
Pin Terminal ONLY
4-Pin Connector
#8-18 x 7/16” Phillips Pan Head TEK Screw
Right Hand Divider Panel
Left Hand Divider Panel
#8-18 x 7/16” Phillips Pan Head TEK Screw
88 Currant Road / Fall River, MA 02720-4781
Lint Drawer/Lint Drawer Switch Box Assemblies
9
For Models Mfd. prior to August 14, 2000 Which Have Individual Lint Screen and Drawer
Illus. No.
Part No.
Qty.
1
6
882449
882450
108220
122116
122605
122701
122801
882507
1
1
1
1
1
2
1
1
7
8
9
10
11
12
13
150301
122700
122604
150301
319076
319077
150301
4
2
1
2
1
1
14
2
3
4
5
Telephone: (508) 678-9000
Description
White Lint Drawer ONLY
Coral Wrinkle Blue Lint Drawer ONLY
Lint Screen Assembly ONLY
Lint Drawer Switch ONLY
4-Pin Socket Connector
Socket Terminal ONLY
Pin/Socket Extraction Tool
Lint Drawer Switch Box Assembly Complete
(includes illus. nos. 3 through 6)
#8-18 x 7/16” Phillips Pan Head TEK Screw
Pin Terminal ONLY
4-Pin Connector
#8-18 x 7/16” Phillips Pan Head TEK Screw
Right Hand Divider Panel
Left Hand Divider Panel
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
Fan (Squirrel Cage) Shaft Mount Assembly
10
Illus. No.
Part No.
Qty.
1
2
100612
821078
1
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17*
821073
117604
152006
153065
332280
881061
153004
153005
152005
100812
880879
153004
153005
150617
101177
100184
1
4
2
1
1
1
4
4
4
2
1
2
2
2
1
2
18
19
100706
101194
1
1
*
Description
1-1/4” Bore x 15” Diameter x 6” Blower/Fan (squirrel cage)
Fan Shaft Mount Assembly Complete
(includes illus. nos. 1 through 16 and 18 through 19)
Fan Shaft Mount ONLY
Neoprene Sponge Tape (sold by the foot)
1/2-20 Left Hand Jam Nut
1/2” Flat Washer
Fan Shaft ONLY
1-3/8” Flange Bearing with Setscrews and Grease Fitting
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
1-3/8” Retaining Ring
1-3/8” Pillow Block Bearing ONLY
3/8” Flat Washer
3/8” Lock Washer
#3-16 x 1” Hex Head Bolt
2B x 5.8 Pulley (for gas models Only)
BX-63 Cogged Belt (fan shaft to blower motor)
For 60 Hz Models ONLY
5/16” x 5/16” x 1-3/8” Key
SDS x 1-3/8” Bushing ONLY
Replace in matched sets (both belts).
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Blower Motor Mount Assembly
Illus. No.
Part No.
Qty.
1
181030*
181031*
181039
101148
101147
101152
101194
100706
152004
153002
153001
821091
153001
153002
150501
152004
150503
332322
153001
153002
150501
100184
100159
1
1
1
1
1
1
1
1
4
4
4
1
4
4
4
4
2
1
2
2
2
2
2
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18**
**
11
Description
7.5 HP 208-230/460v 3ø 60 Hz Motor ONLY
7.5 HP 200-230/380-410v 3ø 50 Hz Motor ONLY
7.5 HP 575v 3ø 60 Hz Motor ONLY
SB x 4.0 Motor Pulley (60 Hz)
SB x 4.8 Motor Pulley (50 Hz)
SH x 1-3/8” Bushing (60 Hz)
SDS x 1-3/8” Bushing (50 Hz)
5/16” x 5/16” x 1-3/8” Key
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Motor Mount Adjustment Plate ONLY
5/16” Flat Washer
5/16” Lock Washer
5/16-18 x 3/4” Hex Head Machine Bolt
5/16-18 Hex Nut
5/16-18 x 2” Hex Head Machine Bolt
Motor Mount Adjustment Angle ONLY
5/16” Flat Washer
5/16” Lock Washer
5/16-18 x 3/4” Hex Head Machine Bolt
BX-63 Cogged Belt (matched sets) 50/60 Hz
BX-61 Cogged Belt (matched sets) 575v 60 Hz ONLY
* Specify voltage when ordering.
** Replace in matched sets (both belts).
Telephone: (508) 678-9000
Fax: (508) 678-9447
Microprocessor Temperature Sensor Bracket Assembly
12
Illus. No.
Part No.
Qty.
1
815931
1
8
9
10
820967
150005
153010
130302
152000
121028
122701
122801
122605
154007
880251
1
2
2
1
2
2
4
1
1
2
1
11
150301
4
2
3
4
5
6
7
American Dryer Corporation
Description
Microprocessor Temperature Sensor Bracket Complete
(includes illus. nos. 1 through 10)
Microprocessor Temperature Sensor Bracket ONLY
#6-32 x 1/4” Phillips Round Head Machine Screw
#6 Star Washer
225° Manual Reset Thermostat ONLY
#6-32 Hex Nut
1/4” x .032 Insulated Terminal
Socket Terminal ONLY
Pin/Socket Extraction Tool
4-Pin Socket Connector
1/4” Push On Fastener
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 6 through 10)
#8-18 x 7/16” Phillips Pan Head TEK Screw
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Assembly
Illus. No.
Part No.
Qty.
1
835269
1
2
3
4
170154
150118
881619
4
48
1
Telephone: (508) 678-9000
13
Description
Basket (tumbler) Assembly
(includes illus. nos. 1 through 3)
Basket (tumbler) Perforated Side
1/4-20 x 1/4 Socket Button Head Cap Screw
Rotational Sensor Magnet
Fax: (508) 678-9447
Basket (Tumbler) Bearing/Rotational Sensor Assemblies
14
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
100244
153011
153025
152050
319065
815960
390314
150309
100817
1
4
4
4
1
1
1
4
1
American Dryer Corporation
Description
1-15/16” Basket (tumbler) Bearing
9/16” Flat Washer
9/16” Lock Washer
9/16-12 Hex Nut
Rotational Sensor Mounting Bracket
Rotational Sensor Assembly
Back Guard ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1-15/16” Retaining Ring
88 Currant Road / Fall River, MA 02720-4781
Drive Shaft Assembly
Illus. No.
Part No.
Qty.
1
882460
1
2
3
4
5
6
7
8
9
10
11*
12
180043
101234
-----152011
153005
153004
835360
101184
101189
100140
100717
1
1
2
4
4
4
2
1
1
2
1
*
15
Description
Basket (tumbler) Shaft Assembly
(includes illus. nos. 1 and 4)
11” Drive Wheel
1-3/8” Taper Lock Bushing
1-1/2” Pillow Block Bearing (sold only as part of illus. no. 1)
3/8-18 Hex Nut
3/8” Lock Washer
3/8” Flat Washer
Bearing Backing Plate Assembly
1-3/8” Bushing with Setscrew
2B x 8.0 Pulley
BX-38 Cogged Belt
5/16” x 5/16” x 2-3/4” Key
Replace in matched sets (both belts).
Telephone: (508) 678-9000
Fax: (508) 678-9447
Idler Shaft Assembly
16
Illus. No.
Part No.
Qty.
1
882460
1
2
3
4
5
6
7
8
9
180043
101234
-----152011
153005
153004
835360
100717
1
1
2
4
4
4
2
1
American Dryer Corporation
Description
Idler Shaft Assembly
(includes illus. nos. 1 and 4)
11” Drive Wheel
1-3/8” Taper Lock Bushing
1-3/8” Pillow Block Bearing (sold only as part of illus. no. 1)
3/8-18 Hex Nut
3/8” Lock Washer
3/8” Flat Washer
Bearing Backing Plate Assembly
5/16” x 5/16” x 2-3/4” Long Key
88 Currant Road / Fall River, MA 02720-4781
Speed Reducer Shaft Assembly
Illus. No.
Part No.
Qty.
1
882505
1
2
101160
1
101187
1
3
4
5
6
7
8
9
10
--------------152005
153005
153004
835361
100717
--------
1
2
4
4
4
2
1
1
11*
12*
13
100124
100140
101152
2
2
1
14
100717
1
*
17
Description
Speed Reducing Shaft Assembly
(includes illus. nos. 1, 3, 4, and 10)
2B x 3.4 SH Sheave
(for models mfd. as of March 6, 2000)
2B x 4.0” Pulley
(for models mfd. prior to March 6, 2000)
1-3/8” Bushing with Setscrew (sold only as an assembly, illus. no. 1)
1-3/8” Pillow Block Bearing (sold only as an assembly, illus. no. 1)
3/8-16 Hex Nut
3/8” Lock Washer
3/8” Flat Washer
Bearing Back Up Plate
5/16” x 5/16” x 2-3/4” Long Key
2B x 13.6” SK Sheave
(sold only as an assembly, illus. no. 1)
BX-53 Belt
BX-38 Cogged Belt
SH x 1-3/8” Bushing (60 Hz)
(includes illus. no. 9)
5/16” x 5/16” x 2-3/4” Key
Replace in matched sets (both belts).
Telephone: (508) 678-9000
Fax: (508) 678-9447
Totally Enclosed, Non-Venting (T.E.N.V.) Drive Motor Assembly
18
Illus. No.
Part No.
Qty.
1
2
3
4
5
835297
150501
153002
153001
882078
1
4
8
8
1
6
7
8*
9**
10
11
181019
152004
101235
100124
-------150619
152005
1
4
1
2
1
2
4
Description
Motor Adjustment Plate
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
3 HP 208-230/380/416/460v 3ø 50/60 Hz Totally Enclosed, Non-Venting
(T.E.N.V.) Motor
3 HP 575v 3ø 60 Hz Totally Enclosed, Non-Venting (T.E.N.V.) Motor
5/16” Hex Nut
1-1/8” Pulley
BX-53 Cogged Belt
5/16” Key
3/8-16 x 3” Tap Bolt
3/8-16 Hex Nut
* Replace in matched sets (both belts).
** Consult factory.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Sail Switch Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
105500
319202
154002
802800
802801
1
1
1
1
1
5
6
7
8
9
10
150300
150303
122200
802799
150309
154004
2
2
1
1
2
1
Telephone: (508) 678-9000
19
Description
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
Sail Switch Box with Cover and Bracket ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 1 through 4 and 6 through 10)
#10 x 1/2” Hex Washer TEK Screw
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch ONLY
Sail Switch Box Cover and Bracket ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Twin Speed Nut
Fax: (508) 678-9447
20
American Dryer Corporation
Direct Spark Ignition (DSI) Burner Assembly
88 Currant Road / Fall River, MA 02720-4781
Direct Spark Ignition (DSI) Burner Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
10
11
12
16
17
18
19
142929
332117
150309
142583
128919
142808
142602
152013
142507
128915
332487
140017
882945
332486
141240
140839
140820
390169
881492
332121
--------
1
1
33
1
1*
1
1
2
1
1
1
1
1
1
1
4
4
1
4
1
1
20
21
22
23
24
25
26
332113
331290
151000
130201
150005
821457
332256
1
1
2
1
2
1
1
27
28
29
801048
153562
835037**
821960**
820904
882118*
1
2
1
1
1
1
13
14
15*
21
Description
1-1/2” to 1” Reducing Coupling
Pipe Bracket
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1” x 40” Nipple
High Voltage (HV) Ignition Cable with Cap 36”
1” x 3” Nipple
1” Union
#6-32 Hex Nut
1” x 90° Street Elbow
Direct Spark Ignition (DSI) Ignitor
Gas Pipe Bracket Straight Extended
1” 24 VAC Redundant Gas Valve (natural gas)
1” 24 VAC Gas Valve Liquid Propane (L.P.)
Gas Pipe Bracket Bent Extended
4-Port Manifold ONLY
#2 Burner Orifice (natural gas)
#29 Burner Orifice (liquid propane [L.P.] gas Only)
Direct Spark Ignition (DSI) Mount Manifold Rest
Burner Tube ONLY
Burner Tube Support ONLY
Sail Switch
(refer to Sail Switch Assembly on page 19)
Burner Box Cover Plate
Ignitor/Flame-Probe Sight Hole Disc
#6-32 Pal Nut
330° Manual Reset Hi-Limit
#6-32 x 1/4” Phillips Round Head Machine Screw
Burner Hi-Limit Bracket
Large Dryer Liquid Propane (L.P.) Burner Baffle
(liquid propane [L.P.] models Only)
Johnson Direct Spark Ignition (DSI) Module (3 tries)
#6-32 x 3/4” Clinch Stud
Burner Assembly (natural gas Only) Complete (less orifice)
Burner Assembly (liquid propane [L.P.] gas Only) Complete (less orifice)
Burner Box ONLY
ML-175 Liquid Propane (L.P.) Conversion Kit
* Consult factory for elevations over 2,000 feet.
** Orifices are not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
22
American Dryer Corporation
Hot Surface Ignition (HSI) Burner Assembly
88 Currant Road / Fall River, MA 02720-4781
Hot Surface Ignition (HSI) Burner Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
10
11
12
16
17
18
19
142929
332117
150309
142817
141302
142724
142602
142581
142548
881597
332487
140017
882945
319014
141239
140839
140820
390169
881492
332121
--------
1
1
33
1
1
1
1
2
1
1
1
1
1
1
1
4
4
1
4
1
1
20
21
22
23
24
25
26
390170
331290
128921
151000
130201
150005
835152**
1
1
1
2
1
2
1
819062**
1
820904
882118*
821457
881797
151001
1
1
1
1
2
13
14
15*
27
28
29
23
Description
1-1/2” to 1” Reducing Coupling
Pipe Bracket
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1” x 28-1/2” Pipe
1” Union Shutoff
1” x 2” Nipple
1” Union
1” x 5” Nipple
1” x 90° Elbow
Hot Surface Ignitor
Gas Pipe Bracket Straight Extended
1” x 1” 24 VAC Redundant (natural gas) Gas Valve ONLY
1” 24 VAC Gas Valve Liquid Propane (L.P.)
Gas Valve Pipe Bracket
4-Port Manifold ONLY
#2 Burner Orifice (natural gas) ONLY
#29 Burner Orifice Liquid Propane (L.P.) Gas ONLY
Hot Surface Ignition (HSI) Module Mounting Bracket/Manifold Rest
Burner Tube ONLY
Burner Tube Support ONLY
Sail Switch
(refer to Sail Switch Assembly on page 19)
Hot Surface Ignition (HSI) Burner Box Cover Plate ONLY
Sight Hole Disc ONLY
Hot Surface Ignition (HSI) Flame Sensor
#6-32 Pal Nut
330° Manual Reset Hi-Limit ONLY
#6-32 x 1/4” Phillips Round Head Machine Screw
Natural Gas Burner Assembly Complete Less Orifices
(includes illus. nos. 1 through 14 and 16 through 29)
For Models Mfd. with Natural Gas ONLY
Liquid Propane (L.P.) Burner Assembly Complete Less Orifice
(includes illus. nos. 1 through 14 and 16 through 29)
Burner Box ONLY
ML-175 Liquid Propane (L.P.) Conversion Kit
Hi-Limit Mounting Bracket ONLY
Hot Surface Ignition (HSI) Module II
#8-32 Pal Nut
* Consult factory for elevations over 2,000 feet.
** Orifices are not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
24
American Dryer Corporation
Steam Damper Assembly
88 Currant Road / Fall River, MA 02720-4781
Steam Damper Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
165017
153002
152004
152002
153007
820321
820994
1
6
6
4
4
2
1
8
9
10
11
12
13
14
15
16
17
18
153007
152002
115995
102350
151007
100499
100500
152002
153007
100472
143110
4
4
96
2
1
1
1
4
4
1
1
Telephone: (508) 678-9000
25
Description
Steam Coil ONLY (copper)
5/16” Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4” Lock Washer
Steam Damper Hinge Assembly
Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
1/4” Lock Washer
1/4-20 Hex Nut
Steam Damper Gasket (sold by the inch)
Steam Damper Foam (68-1/2” length)
7/16-20 Stainless Steel Acorn Nut
1-1/2” Bore x 3” Stroke Piston
Piston Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/4” x 1/8” M.P.T. Male Connector
1/4” Poly-Flo Tubing (sold by the foot)
Fax: (508) 678-9447
Top Console Assembly
26
Illus. No.
Part No.
Qty.
1
882499
882500
882501
882502
112284
-------153007
152005
821105
1
1
1
1
1
1
8
8
1
821104
1
121104
121105
150615
153018
332186
1
1
4
4
1
2
3
4
5
6
7
8
9
10
11
American Dryer Corporation
Description
White Top Console Assembly ONLY (for gas models Only)
Coral Wrinkle Blue Top Console Assembly ONLY (for gas models Only)
White Top Console Assembly ONLY (for steam models Only)
Coral Wrinkle Blue Top Console Assembly ONLY (for steam models Only)
“Phase 6 OPL Program Location Summary” Label
Dryer Data Label (not for resale by ADC)
1/4” Lock Washer
3/8-16 Hex Nut
Pneumatic Valve Assembly ONLY (for gas models Only)
Refer to Pneumatic Valve Assembly on page 27
Pneumatic Valve Assembly ONLY (for steam models Only)
Refer to Pneumatic Valve Assembly on page 28
2” x 4” Junction Box ONLY
Junction Box Cover ONLY
1/4-20 x 3/4” Tap Bolt
1/4” Flat Washer
Control Door Hinge Channel
88 Currant Road / Fall River, MA 02720-4781
Pneumatic Valve Assembly
27
For Gas Models ONLY
Illus. No.
Part No.
Qty.
1
2
3
143250
150002
100498
821105
1
1
1
1
4
5
6
7
8
143149
100472
330987
153010
152000
1
1
1
1
1
Telephone: (508) 678-9000
Description
1/8” M.P.T. Brass Plug
#6-32 x 1” Slotted Machine Screw
3-Way Micro Valve ONLY - 24 VAC
Pneumatic Valve Assembly Complete
(includes illus. nos. 1 through 8)
1/4” Poly x 1/8” M.P.T. x 90° Elbow
1/4” x 1/8” M.P.T. Male Connector
Micro Valve Support Bracket ONLY
#6 Star Washer
#6-32 Hex Nut
Fax: (508) 678-9447
Pneumatic Valve Assembly
28
For Steam Models ONLY
Illus. No.
Part No.
Qty.
1
2
3
100496
143238
100498
821104
1
3
2
1
4
5
6
7
8
9
10
143223
150002
330987
153010
152000
100520
100472
1
2
1
2
2
2
2
American Dryer Corporation
Description
1/8” Needle Valve
1/8” Close Nipple
3-Way Micro Valve ONLY - 24 VAC
Pneumatic Valve Assembly Complete
(includes illus. nos. 1 through 10)
1/8” F.P.T. Brass Tee
#6-32 x 1” Slotted Machine Screw
Micro Valve Support Bracket ONLY
#6 Star Washer
#6-32 Hex Nut
1/8” N.P.T. Silencer (muffler)
1/4” x 1/8” M.P.T. Male Connector
88 Currant Road / Fall River, MA 02720-4781
Air Jet Assembly
29
Illus. No.
Part No.
Qty.
1
2
3
4
5
332700
143287
143259
143100
821081
1
1
2
3
1
6
7
8
9
332531
152002
153007
143110
143149
1
2
2
5
1
Telephone: (508) 678-9000
Description
Air Jet Tube ONLY
1/4” x 1/8” M.P.T. Male Run Tee
1/4” x 1/8” F.P.T. Bulkhead Fitting
1/4” Aluminum Tube (sold by the foot)
Air Jet Mounting Plate ONLY
(includes illus. nos. 1 through 9)
Air Jet Mounting Plate ONLY
1/4-20 Hex Nut
1/4” Lock Washer
1/4” Poly-Flo Tubing (sold by the foot)
1/4” x 1/8” M.P.T. x 90° Elbow
Fax: (508) 678-9447
30
Microprocessor Reversing Contactor Mounting Panel Assembly
208-240v
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Microprocessor Reversing Contactor Mounting Panel Assembly
31
208-240v
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
132439
132465
151001
150008
120701
132434
1
1
2
2
1
1
132448
1
835148
819057
137060
137013
152004
121012
153002
136008
136057
332346
819072
1
7
8
9
10
11
12
13
14
15
1
4
2
1
1
2
2
1
819060
16
17
18
19
20
21
22
23
150301
151000
120765
150108
150297
121010
120768
132467
2
2
2
2
1
1
8
1
Telephone: (508) 678-9000
Description
Blower Motor Overload
24 VAC Contactor
#8-32 Pal Nut
#6-32 x 1-1/4” Slotted Round Head Machine Screw
4-Position Terminal Block
D-Line Reversing Contactor
(for models mfd. as of April 20, 1999)
K-Line Reversing Contactor - 24 VAC
(for models mfd. prior to April 20, 1999)
208-240v 3ø 60 Hz Transformer (for gas models Only)
208-240v 3ø 60 Hz Transformer (for steam models Only)
Arc Suppressor (A.S.) Board (3)
Nylon Standoff
5/16-18 Hex Nut
Terminal/Ground Lug
5/16” Lock Washer
Fuse Block/Holder
1/2-Amp (Slo-Blo) Fuse ONLY
Contactor/Relay Mounting Panel ONLY
208-240v 3ø 60 Hz Reversing Relay Panel Assembly
For Gas Models ONLY
(includes illus. nos. 1 through 23)
208-240v 3ø 60 Hz Reversing Relay Panel Assembly
For Steam Models ONLY
(includes illus. nos. 1 through 23)
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6-32 Pal Nut
End Stop/Bracket
#8-32 x 1/2” Phillips Pan Head Machine Screw
#10 x 1/2” Hex Washer TEK Screw
L-70 Ground Lug
Din Mounting Rail (sold by the inch)
9-13-Amp Drive Motor Overload 208-240v
Fax: (508) 678-9447
32
Microprocessor Reversing Contactor Mounting Panel Assembly
460v and 575v
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Microprocessor Reversing Contactor Mounting Panel Assembly
33
460v and 575v
Illus. No.
Part No.
Qty.
1
132467
132436
132465
151001
150008
120701
132448
819004
837003
137060
137013
152004
121012
153002
132474
132457
135501
332346
819003
1
1
1
2
2
1
1
1
1
1
4
2
1
2
1
1
1
1
1
819998
1
150301
151000
120765
150108
150297
121010
120768
3
2
2
2
1
1
8
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Telephone: (508) 678-9000
Description
9-13-Amp Overload (460v 3ø 60 Hz)
7-10-Amp Overload (575v 3ø 60 Hz)
24 VAC Contactor
#8-32 Pal Nut
#6-32 x 1-1/4 Slotted Round Head Machine Screw
4-Position Terminal Block
“K Line” Reversing Contactor - 24 VAC
460v Transformer Assembly
575v Transformer Assembly
Arc Suppressor (A.S.) Board (3)
Nylon Standoff
5/16-18 Hex Nut
Terminal/Ground Lug
5/16” Lock Washer
3.8-5.5A Overload (460v 3ø 60 Hz)
2.6-3.7A Overload (575v 3ø 60 Hz)
1-Amp Double-Pole Circuit Breaker
Relay Panel
460v 3ø 60 Hz Reversing Relay Panel Assembly
(includes illus. nos. 1 through 22)
575v 3ø 60 Hz Reversing Relay Panel Assembly
(includes illus. nos. 1 through 22)
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6-32 Pal Nut
End Stop
#8-32 x 1/2” Phillips Pan Head Machine Screw
#10 x 1/2” Hex Washer TEK Green
L-70 14-4 Terminal Lug
Din Mounting Rail (sold by the inch)
Fax: (508) 678-9447
34
American Dryer Corporation
Back Guard Assemblies
88 Currant Road / Fall River, MA 02720-4781
Back Guard Assemblies
Illus. No.
Part No.
Qty.
1
821793
1
821956
821092
821720
1
1
1
2
--------
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
112046
114005
112519
114044
114007
112014
114008
114001
150512
332309
112280
112017
--------------112284
114093
170511
143164
100472
143115
100472
143246
114095
114006
114077
114093
153007
1
1
1
1
1
1
1
1
4
1
1
1
1
1
1
1
2
2
2
4
2
2
1
1
1
1
4
Telephone: (508) 678-9000
35
Description
Square Duct to 20” Round Duct Transition Piece Assembly with Optional
Damper (steam)
Square Duct to 20” Round Duct Transition Piece Assembly (steam)
Square Duct to 18” Round Duct Transition Piece Assembly (gas)
Square Duct to 18” Round Duct Transition Piece Assembly with Optional
Damper (gas)
Wiring Diagram for Machine
(contact factory with model and serial number)
“Computer Ground” Label
“DANGER - Hot” Label
“Routine Maintenance” Label
“High Voltage” Label
“DANGER - High Voltage” Label
“High Voltage” Label
“WARNING - Fumes” Label
“CAUTION - Exhaust/Lint Screen” Label
1/4-20 x 1/2” Hex Head Machine Bolt
Side Access Panel
“Clean Lint Screen” Label
“Address” Label (not for resale)
“Serial Number” Label (not for resale)
Wiring Diagram (contact factory with specific dryer serial number)
“Phase 6 Program Location” Label
“Important Manual Reset Hi-Limit” Label
1/8” M.P.T. Zirc (grease) Fitting
1/8” F.P.T. Bulkhead Fitting
1/4” x 1/8” M.P.T. Male Connector
1/4” Nylo-Seal Tube
1/4” x 1/8” M.P.T. Male Connector
1/4-28 x 18” F.P.T. Fitting
“Do Not Dry Mop Heads” Label
“WARNING - Fire Hazard” Label
“Grease Instruction” Label
“Important Manual Reset Hi-Limit” Label
1/4” Lock Washer
Fax: (508) 678-9447
ADC 450071
1 - 03/09/00-25
4 * 12/17/02-25
2 - 06/05/00-25
3 * 01/04/01-25