Download American Dryer Corp. AD-50V User's Manual

AD-50V Parts Manual
24 VAC Phase 5
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
e-mail: [email protected]
www.amdry.com
033000JCARRITA/abe
ADC Part No. 450345
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________
MODEL NO.
AD-50V
__________________________________________
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s)
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory,
you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that
your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
Table of Contents
OPL Control Door Assembly
For Models Mfd. as of July 1, 2002 .................................................................................................... 3
Coin Control Door Assembly
For Models Mfd. as of July 1, 2002 .................................................................................................... 4
Control Door Assembly
For Models Mfd. prior to July 1, 2002 ................................................................................................ 5
Phase 5 Coin Microprocessor Control Panel Assembly ....................................................................... 6, 7
Phase 5 OPL Microprocessor Control Panel Assembly ........................................................................... 8
Coin and OPL Control Box Assembly ..................................................................................................... 9
Coin Vault Assembly ............................................................................................................................. 10
Dual Timer “Tap Touch” Controls
For Models Mfd. as of November 1, 2000 ....................................................................................... 11
Dual Timer Control Panel Assembly
For Models Mfd. prior to November 1, 2000 ................................................................................... 12
Non-Microprocessor Coin Meter Control Panel Assembly
For Models Mfd. as of January 25, 2002 .......................................................................................... 13
Non-Microprocessor Coin Meter Control Panel Assembly
For Models Mfd. prior to January 25, 2002 ...................................................................................... 14
Front Panel Assembly
For Models Mfd. with Steel Main Door ............................................................................................ 15
Front Panel Assembly
For Models Mfd. with Plastic Main Door .......................................................................................... 16
Main Door “Steel” Assembly ................................................................................................................ 17
Plastic Main Door Assembly ................................................................................................................. 18
Main Door Switch Assembly
For Models Mfd. with Steel Main Door ............................................................................................ 19
Main Door Switch
For Models Mfd. with Plastic Main Door .......................................................................................... 20
Lint Drawer/Lint Drawer Switch Assemblies
For Models Mfd. as of August 10, 2000 ........................................................................................... 21
Lint Drawer/Lint Drawer Switch Assemblies
For Models Mfd. prior to August 10, 2000 ....................................................................................... 22
Idler Bearing Assembly ......................................................................................................................... 23
Basket (Tumbler) Bearing Assembly
For Models Mfd. as of July 17, 2000 .......................................................................................... 24, 25
Basket (Tumbler) Bearing Assembly
For Models Mfd. prior to July 17, 2000 ...................................................................................... 26, 27
Basket (Tumbler)/Support Assemblies ............................................................................................. 28, 29
Non-Reversing T.E.F.C. Motor Mount Assembly ............................................................................ 30, 31
Reversing T.E.F.C. Motor Mount Assembly .................................................................................... 32, 33
Sensor Bracket Assemblies ............................................................................................................. 34, 35
Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. as of April 7, 2000 .......................................................................................... 36, 37
Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. prior to April 7, 2000 ...................................................................................... 38, 39
Electric Oven Assembly .................................................................................................................. 40, 41
Gas Burner Sail Switch/Hi-Limit Assemblies .......................................................................................... 42
Single-Phase (1ø) Motor, Electric Relay Panel Assembly ....................................................................... 43
3-Phase (3ø) Motor, Electric Relay Panel Assembly ........................................................................ 44, 45
460-480 VAC 3-Phase (3ø) Motor, Electric Relay Panel Assembly ....................................................... 46
Reversing Electric Relay Panel Assembly ............................................................................................... 47
460-480 VAC Reversing Electric Relay Panel Assembly .................................................................. 48, 49
Steam Coil/Air Operated Steam Damper Assembly ......................................................................... 50, 51
Steam Coil/Mechanical Steam Damper Assembly Option ................................................................ 52, 53
Outer Top/Back Guard Assemblies ....................................................................................................... 54
Microprocessor Coin Acceptors Listing ................................................................................................ 55
Coin Meter Replacement Parts ............................................................................................................. 56
Electric Oven Component Application Chart ......................................................................................... 57
Additional Parts Available ..................................................................................................................... 58
OPL Control Door Assembly
3
For Models Mfd. as of July 1, 2002
Illus. No.
1
2
3
4
5
6
7
8
9
Part No.
Qty.
881053
870011
883550
1
1
1
883551
1
883552
1
117604
150317
102603
102601
102502
150321
154011
3
2
1
1
1
2
2
Telephone: (508) 678-9000
Description
ADC Logo with Tape
Double Sided Tape Kit
White Control Door Assembly
(includes illus. nos. 2 and 3)
Ivory Control Door Assembly
(includes illus. nos. 2 and 3)
Coral Blue Control Door Assembly
(includes illus. nos. 2 and 3)
Neoprene Sponge Tape (sold by the foot)
#10-16 x 3/4” TORX + BTN Type 1
Control Door Rod Support Catch
Control Door Rod Retainer Clip
Control Door Support Rod
#10-32 x 1/2” Phillips Machine Screw
#10-32 Multi-Thread U-Nut
Fax: (508) 678-9447
4
Coin Control Door Assembly
For Models Mfd. as of July 1, 2002
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
Part No.
Qty.
160015
160104
160016
881053
883477
1
1
1
1
1
883478
1
883549
1
883476
117604
152014
150317
102603
102601
102502
1
6
4
2
1
1
1
American Dryer Corporation
Description
High Security Lock Assembly
Key ONLY
Lock Cam ONLY
ADC Logo with Tape
White Control Door Assembly with Black Trim
(includes illus. nos. 4 through 7)
Ivory Control Door with Black Trim
(includes illus. nos. 4 through 7)
Coral Blue Control Door with Black Trim
(includes illus. nos. 4 through 7)
Black Trim Strip with Lock Hole
Neoprene Sponge Tape (sold by the foot)
1/4-20 with 3/4” Free Spin Wash Nut
#10-16 x 3/4” TORX + BTN Type 1
Control Door Rod Support Catch
Control Door Rod Retainer Clip
Control Door Support Rod
88 Currant Road / Fall River, MA 02720-4781
5
Control Door Assembly
For Models Mfd. prior to July 1, 2002
Illus. No.
1
2
3
4
5
6
7
8
9
10
Part No.
Qty.
160015
1
160017
1
160104
160052
881053
870011
882511
1
1
1
1
1
882513
1
882512
1
882509
1
117603
150300
102603
150300
102502
102601
3
2
1
2
1
1
Telephone: (508) 678-9000
Description
High Security MK-100 Lock Assembly with Key
(for coin models Only)
Special Dummy Lock ONLY
(for non-coin models Only)
MK-100 Key ONLY
Lock Cam ONLY
ADC Logo with Tape
Double Sided Tape Kit
White High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
Almond “B” High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
Coral Blue High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
Stainless Steel High Security Control Door Assembly Less Lock
(includes illus. nos. 4 and 5)
Noise Suppressor Tape (sold by the foot)
#10-16 x 1/2” Hex Washer TEK Screw
Control Door Rod Support Catch
#10-16 x 1/2” Hex Washer TEK Screw
Control Door Support Rod
Control Door Rod Retainer Clip
Fax: (508) 678-9447
6
Phase 5 Coin Microprocessor Control Panel Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
7
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No.
1
2
Part No.
Qty.
112526
883537
1
1
883538
1
883582
1
883581
1
883539
1
883540
1
883580
1
883579
1
5
6
7
150309
137213
824998
153010
150005
---------
1
1
1
2
2
1
8
--------
1
9
10
137023
137021
880772
122800
136048
1
3
1
1
1
3
4
11
Description
Coin Keyboard Label Assembly
Phase 5 Coin Control Panel Assembly
(includes illus. nos. 1, 2, and 4 through 6)
(for models mfd. as of June 25, 2002)
Phase 5 Coin Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, and 4 through 6)
(for models mfd. as of June 25, 2002)
Phase 5 Coin Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, and 4 through 6)
(for models mfd. prior to June 25, 2002)
Phase 5 Coin Control Panel Assembly
(includes illus. nos. 1, 2, and 4 through 6)
(for models mfd. prior to June 25, 2002)
Coin Control Panel ONLY
(for models mfd. as of June 25, 2002)
Coin Control Panel ONLY with Battery Bracket
(for models mfd. as of June 25, 2002)
Coin Control Panel ONLY
(for models mfd. prior to June 25, 2002)
Coin Control Panel ONLY with Battery Bracket
(for models mfd. prior to June 25, 2002)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Phase 5 Coin Controller ONLY
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 1/4” Phillips Round Head Machine Screw
Microprocessor Coin Acceptor
(refer to Microprocessor Coin Acceptors Listing on page 55)
Optic Switch ONLY
(refer to Microprocessor Coin Acceptors Listing on page 55)
Optic Switch Connector ONLY
Microprocessor Socket ONLY
Single Coin Optical Switch Harness
Microprocessor (female) Pin Extraction Tool
1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number of controller (computer).
Telephone: (508) 678-9000
Fax: (508) 678-9447
8
Phase 5 OPL Microprocessor Control Panel Assembly
Illus. No.
1
2
3
4
5
6
7
Part No.
Qty.
112535
112276
112275
1
1
1
112277
1
112278
1
801255
801256
801206
1
1
1
801207
1
137222
137231
824998
153010
150005
150309
136048
1
1
1
2
2
1
1
Description
OPL English Keyboard Label Assembly
OPL Stick-On Labels (English ONLY)...Not Illustrated
3-Language OPL Stick-On Labels
(Spanish, Italian, and Hebrew)...Not Illustrated
3-Language OPL Stick-On Labels
(English, Spanish, and Hebrew)...Not Illustrated
5-Language OPL Stick-On Labels
(Italian, Dutch, French, German, and Chinese)...Not Illustrated
Phase 5 Microprocessor Control Panel ONLY
Phase 5 Microprocessor Control Panel ONLY with Battery Bracket
Phase 5 OPL Non-Reversing Microprocessor Control Panel
Assembly Complete
(includes illus. nos. 1 through 6)
Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete
(includes illus. nos. 1 through 6)
Phase 5 OPL Non-Reversing Controller ONLY
Phase 5 OPL Reversing Controller ONLY
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 1/4” Phillips Round Head Machine Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number for controller (computer).
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
9
Coin and OPL Control Box Assembly
Illus. No.
*
Part No.
Qty.
1
132002
1
2
3
4
150300
150301
131931
2
2
1
5
137035
1
6
323583
1
7
8
9
--
150300
122641
122706
122801
2
1
*
1
Description
Transformer
(for mechanical steam damper models - 208 VAC and higher Only)
#10-16 x 1/2” Hex Washer TEK Screw
#8-18 x 7/16” Phillips Pan Head TEK Screw
Steam Valve Relay - 24 VAC
(for mechanical steam damper models Only)
Motor Capacitor
(for mechanical steam damper models Only)
Capacitor Bracket
(for mechanical steam damper models Only)
#10-16 x 1/2” Hex Washer TEK Screw
15-Pin Microprocessor Controller (computer) Connector
Socket Terminal ONLY
Pin/Socket Extraction Tool
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
10
Illus. No.
1
Part No.
Qty.
802112
1
802117
802110
1
1
4
802115
160028
875061
160105*
802020
1
1
1
1
1
5
6
7
8
152014
102502
102601
102603
4
1
1
1
2
3
*
Coin Vault Assembly
Description
Microprocessor Coin Vault Assembly Complete
(includes illus. nos. 1 through 5)
Microprocessor Coin Vault ONLY
Non-Microprocessor Coin Vault Assembly Complete
(includes illus. nos. 1 through 5)
Non-Microprocessor Coin Vault ONLY
Cam for 1/4 Turn Lock ONLY
1/4 Turn Lock with Key and Cam
1/4 Turn Mer-Pel Key ONLY
1/4 Turn Coin Box Assembly
(includes illus. nos. 2 through 4)
1/4-20 Free Spin Wash Nut
Control Door Support Rod
Control Door Rod Retainer Clip
Control Door Rod Catch
Specify key number when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Dual Timer “Tap Touch” Controls
11
For Models Mfd. as of November 1, 2000
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
824298
824299
824175
122301
131932
120730
151000
882903
1
1
1
1
3
1
6
1
9
10
11
12
13
14
15
850392
153010
152000
150207
150110
112563
124104
124105
2
3
2
4
1
1
1
Telephone: (508) 678-9000
Description
15 Minute Timer - 24 VAC
60 Minute Timer - 24 VAC
Red Pilot Light - 24 VAC
“Tap Touch” Switch
Relay SPST 24v
30-Position Terminal Block
#6-32 Pal Nut
Dual Timer Panel Complete
(includes illus. nos. 1 through 15)
Dual Timer Panel ONLY
#6 Star Washer
#6-32 Hex Nut
#10-24 x 1/2” Phillips Pan Head Machine Screw
#8-32 x 1/4” Phillips Round Head Machine Screw
Dual Timer Panel Overlay
Pure Touch Knob with Red Pointer
Pure Touch Knob with Blue Pointer
Fax: (508) 678-9447
12
Dual Timer Control Panel Assembly
For Models Mfd. prior to November 1, 2000
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
---
Part No.
Qty.
123005
122400
882596
1
1
1
882600
1
850456
131917
150207
154001
152000
153010
120730
150110
131932
151000
112050
124103
124025
124030
132198
882540
882573
1
1
2
2
2
2
1
4
1
4
1
2
1
1
1
1
1
American Dryer Corporation
Description
Red Indicator Light - 24 VAC
Rocker Heat Selector Switch
Dual Timer Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 16)
Dual Timer Reversing Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 17)
Dual Timer Control Panel ONLY
Push-To-Start Relay - 24 VAC
#10-24 x 1/2” Phillips Pan Head Machine Screw
#10-24 Speed Nut
#6-32 Hex Nut
#6 Star Washer
30-Position Terminal Block
#8-32 x 1/4” Phillips Round Head Machine Screw
Dual Timer Relay - 24 VAC
#6-32 Pal Nut
Dual Timer Label ONLY
Arrow Timer Knob
60-Minute Timer - 24 VAC
15-Minute Timer - 24 VAC
Reversing Timer - 24 VAC
Panel Wiring (non-reversing panel)...Not Illustrated
Panel Wiring (reversing panel)...Not Illustrated
88 Currant Road / Fall River, MA 02720-4781
13
Non-Microprocessor Coin Meter Control Panel Assembly
For Models Mfd. as of January 25, 2002
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
--
Part No.
Qty.
123005
122400
824172
1
1
1
824109
131932
154001
123225
125601
153010
152016
120712
150300
122602
122700
122801
1
1
2
1
1
2
2
1
1
1
7
1
Description
Red Indicator Light - 24 VAC
Rocker Heat Selector Switch
Coin Meter Control Panel Assembly Less Coin Meter
(includes illus. nos. 2 through 5, 7, and 8)
Coin Meter Control Panel ONLY
24 VAC Relay
#10-24 Speed Nut (used on P/N: 131932, 24 VAC relay)
Green Push-To-Start Button
25¢ Coin Meter - 24 VAC (specify timing)
#6 Star Washer
#4-40 Hex Nut
12-Position Terminal Block
#10-16 x 1/2” Hex Washer TEK Screw
9-Pin Connector
Pin Terminal ONLY
Pin Extraction Tool
NOTE: For Coin Meter Replacement Parts refer to page 56.
Telephone: (508) 678-9000
Fax: (508) 678-9447
14
Non-Microprocessor Coin Meter Control Panel Assembly
For Models Mfd. prior to January 25, 2002
Illus. No.
*
Part No.
Qty.
1
2
3
123005
122400
824020
1
1
1
4
5
6
7*
8
9
10
11
12
---
800054
131917
150207
154001
125601
150303
120712
150309
122602
122700
122801
1
1
2
2
1
2
1
1
1
9
1
Description
Red Indicator Light - 24 VAC
Rocker Heat Selector Switch
Coin Meter Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 6 and 8 through 12)
Coin Meter Control Panel ONLY
Push-To-Start Relay - 24 VAC
#10-24 x 1/2” Round Head Machine Screw
#10-24 Speed Nut
25¢ Coin Meter - 24 VAC (specify timing)
#4 x 3/4” Pan Head “A” Screw
12-Position Terminal Block
#10-16 x 1/2” Hex Head TEK Crimptite Screw
9-Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool
Consult factory for coin meters not listed.
NOTE: For Coin Meter Replacement Parts refer to page 56.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
15
Front Panel Assembly
For Models Mfd. with Steel Main Door
Illus. No.
1
Part No.
Qty.
883137
1
883138
1
883139
1
3
4
150313
150318
---------------
11
1
1
1
5
6
170330
154215
1
2
2
Telephone: (508) 678-9000
Description
White Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
Coral Blue Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
Ivory Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
#10-16 x 1/2” TORX Plus BTN Type 1
25 IP TORX Plus Bit 1/4 Hex (for removal of TORX head screw)
Main Door Hinge
Lint Drawer Switch
(refer to Lint Drawer/Lint Drawer Switch Assemblies
on page 21 and page 22)
Friction Door Latch
5/32” Pop Rivet
Fax: (508) 678-9447
16
Front Panel Assembly
For Models Mfd. with Plastic Main Door
Illus. No.
1
Part No.
Qty.
882525
1
882527
1
882528
1
2
3
4
150309
121405
--------
11
1
1
5
6
170330
154215
1
2
American Dryer Corporation
Description
White Right Hand Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
Almond “B” Right Hand Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
Coral Blue Right Hand Front Panel Assembly
(includes illus. nos. 1, 3, 5, and 6)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Rubber Grommet
Lint Drawer Switch
(refer to Lint Drawer/Lint Drawer Switch Assemblies
on page 21 and page 22)
Friction Door Latch
5/32” Pop Rivet
88 Currant Road / Fall River, MA 02720-4781
Main Door “Steel” Assembly
Illus. No.
Part No.
Qty.
1
881150
1
2
3
102354
170731
881152
1
1
1
4
5
6
150445
153031
881151
2
1
1
7
8
9
10
11
12
13
14
15
150445
150683
152014
151010
150120
150683
152014
881210
102211
170731
2
3
3
1
1
3
3
1
1
1
Telephone: (508) 678-9000
17
Description
Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
Door Gasket
Black Gasket Adhesive (10.7 oz. cartridge)
Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
1/4-20 x 3/4” Black Cap Head Setscrew
1/4” Nylon Washer
Black Bottom Hinge Block Assembly
(includes illus. nos. 5 through 7)
1/4-20 x 3/4” Black Cap Head Setscrew
1/4-20 x 5/8” Black Carriage Bolt
1/2-20 Free Spin Wash Nut
#10-32 Black Hex Acorn Nut
Door Latch Screw
1/4-20 x 5/8” Black Carriage Bolt
1/2-20 Free Spin Wash Nut
Black Main Door Handle ONLY
20-7/16” Door Glass
Black Glass Adhesive (10.3 oz. cartridge)
Fax: (508) 678-9447
18
Illus. No.
Plastic Main Door Assembly
Part No.
Qty.
1
881422
1
2
3
4
5
6
800448
150410
152014
102349
102212
170730
150448
170319
150431
1
4
4
1
1
1
4
4
1
7
8
9
American Dryer Corporation
Description
Black Plastic Main Door Assembly Complete with Mechanical Fasteners
(includes illus. nos. 1 and 5 through 9)
12-1/2” Stainless Steel Main Door Hinge Assembly
#10-24 x 3/8” Phillips Pan Head Taptite Screw
1/4-20 Free Spin Wash Nut
Main Door Gasket
20-7/16” Door Glass with (4) Holes
Main Door Gasket/Glass Adhesive (10.3 oz. cartridge)
1/2” Stainless Steel Flat Head Allen Screw
Door Glass (Nylon) Spacer
Main Door Latch Screw
(#10 x 7/16” Dome Hex Head Screw)
88 Currant Road / Fall River, MA 02720-4781
Main Door Switch Assembly
19
For Models Mfd. with Steel Main Door
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
150006
152013
153010
137005
122636
881211
881153
2
2
2
1
2
1
1
7
150301
2
Telephone: (508) 678-9000
Description
#6-32 x 7/8” Phillips Pan Head Machine Screw
#6-32 Hex Nut
#6 Star Washer
Door Switch
Flag Terminal
Black Main Door Switch Housing ONLY
Black Main Door Switch Housing Complete
(includes illus. nos. 1 through 4, and 6)
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
20
Main Door Switch
For Models Mfd. with Plastic Main Door
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
152013
153008
137005
121028
154281
800448
2
2
1
2
2
1
7
8
9
10
153565
881246
150201
121405
2
1
2
1
American Dryer Corporation
Description
#6-32 Hex Nut
#6 Lock Washer
Single Pole Door Switch
Insulated Female Terminal
3/8” Standard Nylon Spacer
12-1/2” Stainless Steel Main Door Hinge Assembly
(includes illus. nos. 6 and 7)
#6-32 x 1” Self Clinching Stud
Main Door Switch Housing
#10-32 x 1/4” Phillips Pan Head Screw
Rubber Grommet
88 Currant Road / Fall River, MA 02720-4781
Lint Drawer/Lint Drawer Switch Assemblies
21
For Models Mfd. as of August 10, 2000
Illus. No.
1
Part No.
Qty.
883161
1
883162
1
883163
1
6
117605
122116
122605
122701
122801
818087
5
1
2
4
1
1
7
8
9
304136
150301
122700
122604
1
2
4
2
2
3
4
5
Telephone: (508) 678-9000
Description
White Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Coral Blue Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Ivory Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Neoprene Sponge Tape (sold by the foot)
Lint Drawer Switch
4-Pin Socket Connector ONLY
Socket Terminal ONLY
Pin/Socket Extraction Tool
Lint Drawer Switch Box Assembly
(includes illus. nos. 3 through 6)
Lint Drawer Switch Box Cover ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Pin Terminal ONLY
4-Pin Connector ONLY
Fax: (508) 678-9447
22
Lint Drawer/Lint Drawer Switch Assemblies
For Models Mfd. prior to August 10, 2000
Illus. No.
Part No.
Qty.
1
882629
1
882634
1
882628
1
7
117605
108225
122116
122605
122701
122801
800478
5
1
1
2
4
1
1
8
9
10
304136
150301
122700
122604
1
2
4
2
2
3
4
5
6
American Dryer Corporation
Description
White Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Almond “B” Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Coral Blue Lint Drawer Assembly
(includes illus. nos. 1 and 2)
Neoprene Sponge Tape (sold by the foot)
Lint Screen Assembly
Lint Drawer Switch ONLY
4-Pin Socket Connector
Socket Terminal ONLY
Pin/Socket Extraction Tool
Lint Drawer Switch Box Assembly
(includes illus. nos. 4 through 7)
Lint Drawer Switch Box ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Pin Terminal ONLY
4-Pin Connector ONLY
88 Currant Road / Fall River, MA 02720-4781
23
Idler Bearing Assembly
Illus. No.
1
Part No.
Qty.
100100
1
100108
1
101129
100105
1
1
100112
1
4
5
6
154301
100705
882576
2
1
1
7
8
9
10
11
12
150617
153005
153004
801009
152004
150509
2
2
2
1
1
1
2
3
Telephone: (508) 678-9000
Description
5L-660 V-Belt (basket [tumbler] to idler)
For Non-Reversing Models ONLY
5L-680 V-Belt (basket [tumbler] to idler)
For Reversing Models ONLY
9” x 2-1/2” Compound Pulley
4L-520 V-Belt
For Non-Reversing Models ONLY
4L-610 V-Belt (idler to motor)
For Reversing Models ONLY
5/16-18 x 1” Allen Setscrew
3/16” x 3/16” x 1-3/8” Key
Idler Bearing Assembly Complete
(includes illus. nos. 5 through 12)
3/8-16 x 1” Hex Head Machine Bolt
3/8” Lock Washer
3/8” Flat Washer
Idler Square Washer
5/16-18 Hex Nut
5/16-18 x 3” Hex Head Machine Bolt
Fax: (508) 678-9447
24
American Dryer Corporation
Basket (Tumbler) Bearing Assembly
For Models Mfd. as of July 17, 2000
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Bearing Assembly
25
For Models Mfd. as of July 17, 2000
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Part No.
Qty.
880220
153025
152050
882544
1
4
4
1
882545
1
882542
882543
880202
880779
150601
153004
153004
153005
152005
154326
152004
150621
153002
153004
150501
102120
824807
100735
101100
101118
101110
100100
100108
150610
152004
1
1
1
1
2
2
2
2
2
2
2
2
4
6
4
1
1
1
1
1
1
1
1
2
2
Telephone: (508) 678-9000
Description
1-3/4” Flange Bearing
9/16” Lock Washer
9/16-12 Hex Nut
Pillow Block Bearing Assembly Complete
(includes illus. nos. 4 through 17)
Pillow Block Bearing Assembly Complete with Rotational Sensor
(includes illus. nos. 4 through 18)
Pillow Block Bearing Platform ONLY
Pillow Block Bearing Platform ONLY
1-3/8” Pillow Block Bearing
1-3/8” Pillow Block Bearing (for reversing models Only)
3/8-16 x 2” Hex Bolt
3/8” Flat Washer
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-24 x 3/8” Setscrew
5/16-18 Hex Nut
5/16-18 x 1-1/2” Tap Bolt
5/16” Lock Washer
3/8” Flat Washer
5/16-18 x 3/4” Tap Bolt
Sintered 8 Magnet (for reversing models Only)
Rotational Sensor Assembly
Shaft Key (for reversing models Only)
18” Pulley (for non-reversing models Only)
18-3/4” Pulley (for reversing models Only)
1” Taper Lock Bushing (for reversing models Only)
5L-660 V-Belt (basket [tumbler] to idler) For Non-Reversing Models Only
5L-680 V-Belt (basket [tumbler] to idler)
5/16-18 x 1-1/2 Allen Setscrew
5/16-18 Hex Nut
Fax: (508) 678-9447
26
Basket (Tumbler) Bearing Assembly
For Models Mfd. prior to July 17, 2000
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Bearing Assembly
27
For Models Mfd. prior to July 17, 2000
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Qty.
880220
153025
152050
150508
153005
152005
150600
153004
153005
152005
150501
153002
153001
150621
152004
801101
1
4
4
2
2
2
2
*
2
2
4
4
4
2
2
1
801103
1
17
18
801105
801104
880779
1
1
1
19
20
21
880202
152004
150610
101100
1
2
2
1
101118
1
101110
1
100735
154301
100713
100100
1
2
1
1
100108
1
824807
1
22
23
24
25
*
Part No.
Description
1-3/4” Flange Bearing with Nylock Setscrews
9/16” Lock Washer
9/16-12 Hex Nut
3/8-16 x 3/4” Hex Head Machine Bolt
3/8” Lock Washer
3/8-16 Hex Nut
3/8-16 x 1-1/2” Hex Head Machine Bolt
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16-18 x 1-1/2” Hex Head Machine Bolt
5/16-18 Hex Nut
1-3/8” Bearing Box Assembly Complete
(includes illus. nos. 4 through 20)
For Models Mfd. without Rotational Sensor
1-3/8” Bearing Box and Support ONLY
(includes illus. nos. 4 through 6, 16 and 17)
1-3/8” Bearing Box ONLY
Pillow Block Bearing Support ONLY
1-3/8” Pillow Block Bearing Assembly with Magnet
(for models mfd. with rotational sensor)
1-3/8” Pillow Block Bearing with Nylock Setscrews
5/16-18 Hex Nut
5/16-18 x 1-1/2” Allen Setscrew
18” Pulley
(for non-reversing models Only)
18-3/4” Pulley
(for reversing models Only)
1” Taper Lock Hub (key is not included)
For Reversing Models ONLY
Shaft Key (for taper lock hub)
5/16-18 x 1” Allen Setscrew
1/4” x 1/4” x 7/8” Key
5L-660 V-Belt (basket [tumbler] to idler)
For Non-Reversing Models ONLY
5L-680 V-Belt (basket [tumbler] to idler)
For Reversing Models ONLY
Rotational Sensor Assembly (option)
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
28
American Dryer Corporation
Basket (Tumbler)/Support Assemblies
88 Currant Road / Fall River, MA 02720-4781
29
Basket (Tumbler)/Support Assemblies
Illus. No.
1*
2
3
4
5
6
7
8
9
10
11
--*
Part No.
Qty.
800838
800736
800837
1
1
1
882683
1
150413
150429
301302
301311
150500
100903
153004
800616
152005
153005
153004
116001
401010
40
1
2
2
1
4
4
1
4
4
4
1
1
Description
Galvanized Basket (tumbler) ONLY (without felt collar)
Stainless Steel Basket (tumbler) ONLY (without felt collar)
Galvanized Basket (tumbler) and Support Assembly
with Tapered Ribs
(includes illus. nos. 1 through 10)
Stainless Steel Basket (tumbler) and Support Assembly
with Tapered Ribs
(includes illus. nos. 1 through 10)
#10-16 x 1/2” TORX Crimptite Screw
TORX Screw Hand Driver
Basket (tumbler) Rib ONLY (low rib)
Tapered Basket (tumbler) Baffle Rib ONLY (high rib)
5/16-18 x 3/4” Socket Button Head Screw
3/8-16 x 38-1/2” Tie Rod
3/8” Flat Washer
Basket (tumbler) Support ONLY
3/8-16 Hex Nut
3/8” Lock Washer
3/8” Flat Washer
Felt Collar ONLY
#847 Adhesive for Felt Collar (5.0 oz. tube)
Felt collar is not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
30
Illus. No.
Non-Reversing T.E.F.C. Motor Mount Assembly
Part No.
Qty.
1
2
100105
100701
1
1
3
101132
1
101133
1
150501
153002
4
4
4
5
American Dryer Corporation
Description
4L-520 V-Belt (motor to idler)
3/16” x 3/16” x 1” Key
(for use on 3ø models Only)
5/8” x 2” Motor Pulley
(for use on 60 Hz models Only)
5/8” x 2-1/4” Motor Pulley
(for use on 50 Hz models Only)
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
88 Currant Road / Fall River, MA 02720-4781
31
Non-Reversing T.E.F.C. Motor Mount Assembly (continued)
Illus. No.
Part No.
Qty.
6
7
153001
100069*
4
1
100068
1
122701
122801
137030
152004
153002
153001
117604
154000
850017
8
1
1
4
4
4
4
4
1
817029*
1
817074*
1
817080*
1
883271*
1
153050
100604
100702
153050
152006
120200
100007*
3
1
1
1
2
1
1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
*
Description
5/16” Flat Washer
3/4 HP 120-230v 1ø Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor with Plug (56Z frame)
For 60 Hz Models ONLY
3/4 HP 240v 1ø Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor with Plug (56Z frame)
For 50 Hz Models ONLY
Socket Terminal ONLY
Pin/Socket Extraction Tool
8-Pin Housing Connector
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Neoprene Sponge Tape (sold by the foot)
5/16-18 Tinnerman Nut
Non-Reversing Motor Mount ONLY with Gasket (56Z frame)
(includes illus. no. 13)
3/4 HP 120/230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor Mount Assembly Complete with Plug Motor
(includes illus. nos. 3 through 7 and 13 through 20)
3/4 HP 240v 1ø 50 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor Mount Assembly Complete with Plug Motor
(includes illus. nos. 3 through 7 and 13 through 20)
1/2 HP 208/230/380/460v 3ø 60 Hz Non-Reversing Totally Enclosed,
Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete
(includes illus. nos. 2 through 6 and 13 through 22)
1/2 HP 208/230/380/460v 3ø 50 Hz Non-Reversing Totally Enclosed,
Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete
(includes illus. nos. 2 through 6 and 13 through 22)
1/2” S.A.E. Flat Washer
12-1/2” Impellor (fan/blower) with 1/2” Bore
1/8” x 1/8” x 1-1/2” Key
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
3/8” x 90° Connector
1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor (56Z frame)
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
32
American Dryer Corporation
Reversing T.E.F.C. Motor Mount Assembly
88 Currant Road / Fall River, MA 02720-4781
33
Reversing T.E.F.C. Motor Mount Assembly
Illus. No.
1
2
3
Qty.
100112
100701
101132
1
1
1
101133
1
4
5*
120200
181003
1
1
6
7
8
9*
150501
153002
153001
100007
4
4
4
1
10
11
12
13
14
15
16
17
18
120200
150501
153002
153001
154000
152004
153002
153001
850070
1
4
4
4
8
7
4
4
1
803802*
1
803803*
1
117604
153050
100702
100604
153050
152006
4
1
1
1
2
2
19
20
21
22
23
24
*
Part No.
Description
4L-610 V-Belt (motor to idler)
3/16” x 3/16” x 1” Key
5/8” x 2” Motor Pulley
(for 60 Hz models Only)
5/8” x 2-1/4” Motor Pulley
(for 50 Hz models Only)
3/8” x 90° Connector
1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C) (56Z frame)
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor (56Z frame)
3/8” x 90° Connector
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
5/16” Tinnerman Nut
5/16” Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Reversing Motor Mount ONLY with Gasket (56Z frame)
(includes illus. no. 19)
Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount
Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 24)
For 60 Hz Models ONLY
Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount
Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 24)
For 50 Hz Models ONLY
Neoprene Sponge Tape (sold by the foot)
1/2” S.A.E. Flat Washer
1/8” x 1/8” x 1-1/2” Key
12-1/2” Impellor with 1/2” Bore
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
34
American Dryer Corporation
Sensor Bracket Assemblies
88 Currant Road / Fall River, MA 02720-4781
Sensor Bracket Assemblies
Illus. No.
Part No.
Qty.
1
880251
1
2
3
4
5
6
7
8
9
10
130301
153010
152000
121028
122701
122605
154007
150005
817046
1
2
2
2
4
1
2
2
1
11
12
13
14
15
16
17
18
19
20
21
22
23
24
322062
122604
122700
150301
150005
130111
130100
130301
130101
153010
152000
882535
121028
122701
122605
882534
1
1
4
2
5
1
1
1
1
5
5
1
4
4
1
1
25
882536
1
322062
122604
122700
122801
150301
1
1
4
1
2
26
27
28
Telephone: (508) 678-9000
35
Description
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 and 5 through 8)
225° Manual Reset Thermostat
#6 Star Washer
#6-32 Hex Nut
Insulated Terminal ONLY
Socket Terminal ONLY
4-Pin Socket Connector ONLY
1/4” Tinnerman Push On Fastener
#6-32 x 1/4” Round Head Machine Screw
Microprocessor Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 10)
Universal Sensor Bracket ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6-32 x 1/4” Phillips Round Head Machine Screw
130° Thermostat
150° Thermostat
225° Manual Reset Thermostat
180° Thermostat
#6 Star Washer
#6-32 Hex Nut
Sensor Jumper ONLY
Insulated Terminal ONLY
Socket Terminal ONLY
4-Pin Socket Connector ONLY
Sensor Bracket Harness Assembly
(includes illus. nos. 22 through 24)
Noncomputer Sensor Bracket Assembly Complete
(includes illus. nos. 14 through 25)
Universal Sensor Bracket ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
36
American Dryer Corporation
Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. as of April 7, 2000
88 Currant Road / Fall River, MA 02720-4781
37
Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. as of April 7, 2000
Illus. No.
1
2
3
4*
5
6
7
8
9
10
11
12
13
14
15
16
17
18
-------
Part No.
Qty.
141105
151001
150108
140820
140806
141232
150309
318714
128927
880960
140411
880134
882537
150300
817027
128935
152013
142707
142506
142600
142809
817062
3
3
3
3
3
1
3
1
1
817063
1
850899
882271*
883310**
1
1
1
1
1
2
1
1
2
1
1
1
1
1
Description
Large Tube Burner
#8-32 Pal Nut
#8-32 x 1/2” Pan Head Machine Screw
#29 Natural Gas Burner Orifice
#46 Liquid Propane (L.P.) Burner Orifice
1/2” Direct Spark Ignition (DSI) Manifold (3-port)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Gas Valve Bracket (horizontal)
1/2” 24 VAC Redundant (natural gas) Gas Valve
1/2” 24 VAC Redundant (liquid propane [L.P.] gas) Gas Valve
1/2” Valve Liquid Propane (L.P.) Conversion Kit
Ignitor Probe Assembly
Flame-Probe Wire
#10-16 x 1/2” Hex Washer TEK Screw
Direct Spark Ignition (DSI) Module Mounting Bracket Assembly
Johnson Controls Direct Spark Ignition (DSI) Module with 3 Tries
#6-32 Hex Nut
1/2” x 1-1/2” Black Nipple
1/2” Street Elbow
1/2” Black Union
1/2” x 29” Pipe/Nipple
Direct Spark Ignition (DSI) Burner Assembly Complete (natural gas)
(includes illus. nos. 1 through 3 and 5 through 18)
Direct Spark Ignition (DSI) Burner Assembly Complete
(liquid propane [L.P.] gas)
(includes illus. nos. 1 through 3 and 5 through 18)
Direct Spark Ignition (DSI) Burner Box ONLY
ADG-50V Liquid Propane (L.P.) Conversion Kit (includes orifices)
Steam to Gas Transition Plate...Not Illustrated
* Consult factory for elevations over 2,000 feet.
** Needed when converting dryer from steam heat to gas heat.
Telephone: (508) 678-9000
Fax: (508) 678-9447
38
American Dryer Corporation
Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. prior to April 7, 2000
88 Currant Road / Fall River, MA 02720-4781
39
Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. prior to April 7, 2000
Illus. No.
Part No.
Qty.
1
2
3
4*
141105
151001
150108
140820
140806
141232
318700
150300
128927
880960
140411
880134
882537
128935
817027
150309
152013
141313
142809
318712
150309
850899
882271*
883310**
3
3
3
3
3
1
2
2
1
5
6
7
8
9
10
11
12
13
14
15
16
17
18
-----
1
1
1
1
3
2
1
1
1
4
1
1
1
Description
Large Tube Burner
#8-32 Pal Nut
#8-32 x 1/2” Pan Head Machine Screw
#29 Natural Gas Burner Orifice
#46 Liquid Propane (L.P.) Burner Orifice
1/2” Direct Spark Ignition (DSI) Manifold (3-port)
Pipe Bracket (Bent)
#10-16 x 1/2” Hex Washer TEK Screw
1/2” 24 VAC Redundant (natural gas) Gas Valve
1/2” 24 VAC Redundant (liquid propane [L.P.] gas) Gas Valve
1/2” Valve Liquid Propane (L.P.) Conversion Kit
Ignitor Probe Assembly
Flame-Probe Wire
Johnson Controls Direct Spark Ignition (DSI) Module with 3 Tries
Direct Spark Ignition (DSI) Module Mounting Bracket Assembly
#10-16 x 1/2” Hex Head TEK Crimptite Screw
#6-32 Hex Nut
90º x 1/2” x 1” Gas Shutoff Assembly
1/2” x 29” Pipe/Nipple
Gas Valve Pipe Bracket
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Direct Spark Ignition (DSI) Burner Box ONLY
ADG-50V Liquid Propane (L.P.) Conversion Kit (includes orifices)
Steam to Gas Transition Plate...Not Illustrated
* Consult factory for elevations over 2,000 feet.
** Needed when converting dryer from steam heat to gas heat.
Telephone: (508) 678-9000
Fax: (508) 678-9447
40
American Dryer Corporation
Electric Oven Assembly
88 Currant Road / Fall River, MA 02720-4781
41
Electric Oven Assembly
Illus. No.
Part No.
Qty.
1
803007*
--------*
--------*
150300
802800
802801
1
1
2
1
1
154004
150300
802799
122200
150303
105500
319202
154002
150300
803100
320611
150301
130400
150300
154001
121010
152014
--------*
--------*
120081
120080
152008
121011
--------*
153009
321301
150207
883310**
1
2
1
1
2
1
1
1
2
1
1
2
1
2
2
1
3
1
1
1
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
---
Description
Large Electric Oven Box ONLY
Electric Oven Assembly Complete
Electric Element
#10-16 x 1/2” Hex Washer TEK Screw
Sail Switch Box with Bracket and Cover ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 4 through 12)
Twin Speed Nut
#10-16 x 1/2” Hex Washer TEK Screw
Sail Switch Box Cover and Bracket ONLY
Sail Switch ONLY
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
#10-16 x 1/2” Hex Washer TEK Screw
Electric Oven Front Cover ONLY
Large Relay Box Cover ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
290° Hi-Limit Thermostat
#10-16 x 1/2” Hex Washer TEK Screw
#10-24 Speed Nut
L-70 Ground Lug
1/4-20 Free Spin Wash Nut
Oven Relay
Oven Relay Replacement Coil
Internal Ceramic Insulator (2 per element)
External Ceramic Insulator (2 per element)
#10-32 Hex Nut (4 per element)
Bus Bar (sold by the foot)
Terminal Lug
#10 Star Washer (2 per element)
Large Electric Oven Right Side Cover ONLY
#10-24 x 1/2” Phillips Pan Head Machine Screw
Steam to Electric Transition Plate...Not Illustrated
* Refer to Electric Oven Component Application Chart on page 57.
** Needed when converting dryer from steam heat to electric heat.
Telephone: (508) 678-9000
Fax: (508) 678-9447
42
Gas Burner Sail Switch/Hi-Limit Assemblies
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
154004
150300
802799
150303
122200
105500
319202
154002
802800
802801
1
2
1
2
1
1
1
1
1
1
10
11
12
13
14
15
142809
150300
319704
151000
150001
130201
1
2
1
2
2
1
American Dryer Corporation
Description
Twin Speed Nut
#10-16 x 1/2” Hex Washer TEK Screw
Sail Switch Box Cover and Bracket ONLY
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch ONLY
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
Sail Switch Box with Cover and Bracket ONLY
Sail Switch Assembly Complete
(includes illus. nos. 1 through 9)
1/2” x 29-1/8” Pipe/Nipple
#10-16 x 1/2” Hex Washer TEK Screw
Hi-Limit Mounting Bracket ONLY
#6-32 Pal Nut
#6-32 x 1/2” Phillips Round Head Machine Screw
330° Manual Reset Hi-Limit Thermostat ONLY
88 Currant Road / Fall River, MA 02720-4781
43
Single-Phase (1ø) Motor, Electric Relay Panel Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Part No.
Qty.
151000
150300
150008
120716
322817
882662
2
2
2
1
1
1
882663
1
882652
882653
136008
136049
136057
150301
150297
152004
121010
153002
132459
121300
1
1
1 or 2
1
2
1
1
1
1
1
1
3
Telephone: (508) 678-9000
Description
#6-32 Pal Nut
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Pan Head Machine Screw
2-Position Terminal Block
Rear Electric Mounting Plate ONLY
Rear Electric Panel Assembly Complete - 120 Volt
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete - 208-240 Volt
(includes illus. nos. 1 through 14)
Transformer Assembly - 120 Volt
Transformer Assembly - 208-240 Volt
Fuse Holder ONLY
3/4-Amp (Slo-Blo) Fuse ONLY - 120 Volt
1/2-Amp (Slo-Blo) Fuse ONLY - 208-240 Volt
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Hex Washer TEK Screw (green)
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Open/Closed Bushing
Fax: (508) 678-9447
44
American Dryer Corporation
3-Phase (3ø) Motor, Electric Relay Panel Assembly
88 Currant Road / Fall River, MA 02720-4781
3-Phase (3ø) Motor, Electric Relay Panel Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Part No.
Qty.
151000
150300
150008
120701
120716
322817
882664
2
2
2
1
1
1
1
818400
1
882665
1
818395
1
882667
1
882653
818396
882654
136008
136057
150301
150297
152004
121010
153002
132459
121300
1
1
1
2
2
2
1
1
1
1
1
3
Telephone: (508) 678-9000
45
Description
#6-32 Pal Nut
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Pan Head Machine Screw
4-Position Terminal Block (for models mfd. with 3ø motors)
2-Position Terminal Block (for models mfd. with 1ø motors)
Rear Electric Mounting Plate ONLY
Rear Electric Panel Assembly Complete - 208-240 Volt
For Gas and Steam Models ONLY
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly - 208-240 Volt
For Electric Heated Models ONLY
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete - 380-416 Volt
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete - 208-240 Volt
For Electric Heated Models ONLY
For Models Mfd. with Single-Phase (1ø) Motor ONLY
(includes illus. nos. 1 through 14)
Rear Electric Panel Assembly Complete - 380-416 Volt
(includes illus. nos. 1 through 14)
For Electric Heated Models ONLY
For Models Mfd. with Single-Phase (1ø) Motor ONLY
Transformer Assembly - 208-240 Volt for Gas and Steam Models ONLY
Transformer Assembly - 208-240 Volt for Electric Heated Models ONLY
Transformer Assembly - 380-416 Volt
Fuse Holder ONLY
1/2-Amp (Slo-Blo) Fuse ONLY - 208-240 Volt
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Hex Washer TEK Screw (green)
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Open/Closed Bushing
Fax: (508) 678-9447
46
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
460-480 VAC 3-Phase (3ø) Motor, Electric Relay Panel Assembly
Part No.
Qty.
150009
120701
830208
824161
135501
120768
150301
150297
152004
121010
153002
132459
322817
883332
2
1
1
1
1
2
4
2
1
1
1
1
1
1
830262
1
151000
120765
121300
141403
2
4
1
1
American Dryer Corporation
Description
#6-32 x 1-1/2” Phillips Pan Head Machine Screw
4-Position Terminal Block
Transformer Assembly (460 VAC) for Micro Models ONLY
Transformer Assembly (460 VAC) for Non-Micro Models ONLY
1-Amp Double-Pole Circuit Breaker (460 VAC Only)
35 x 15mm Din Rail
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Ground Screw
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
24 VAC 3-Pole Contactor
Mounting Plate ONLY
Rear Panel Assembly Complete (460 VAC) for Micro Models ONLY
(includes illus. nos. 1 through 14)
Rear Panel Assembly Complete (460 VAC) for Non-Micro Models ONLY
(includes illus. nos. 1 through 14)
#6-32 Pal Nut
End Stop
Open/Closed Bushing
Control Voltage Transformer (24V) for Micro Models ONLY
88 Currant Road / Fall River, MA 02720-4781
Reversing Electric Relay Panel Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Part No.
Qty.
150300
150008
120701
132458
882653
825428
882654
136008
136057
150301
150297
152004
121010
153002
132459
322812
882673
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
883335
1
882676
1
151000
120765
2
1
Telephone: (508) 678-9000
47
Description
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 x 1-1/4” Phillips Pan Head Machine Screw
4-Position Terminal Block
3-Pole Reversing Contactor
Transformer Assembly - 208-240 Volt for Gas and Steam Models ONLY
Transformer Assembly - 208-240 Volt for Electric Heated Models ONLY
Transformer Assembly - 380-416 Volt
Fuse Holder ONLY
1/2-Amp (Slo-Blo) Fuse ONLY - 208-240 Volt
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10 x 1/2” Hex Washer TEK Screw (green)
5/16-18 Hex Nut
L-70 Ground Lug
5/16” Lock Washer
3-Pole Contactor
Rear Electric Mounting Plate ONLY
Rear Electric Panel Assembly Complete - 208-240 Volt
For Gas and Steam Models ONLY
(includes illus. nos. 1 through 16)
Rear Electric Panel Assembly Complete (208-240 volt Only)
For Electric Heated Models ONLY
(includes illus. nos. 1 through 16)
Rear Electric Panel Assembly Complete - 380-416 Volt
(includes illus. nos. 1 through 16)
#6-32 Pal Nut
Standard End Bracket
Fax: (508) 678-9447
48
88 Currant Road / Fall River, MA 02720-4781
460-480 VAC Reversing Electric Relay Panel Assembly
American Dryer Corporation
49
460-480 VAC Reversing Electric Relay Panel Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
*
Part No.
Qty.
132458
150297
121010
152004
153002
132459
150300
830208
824161
120765
322817
883327
1
1
1
1
1
1
4
1
1
2
1
1
--------*
1
151000
150009
120701
135501
120768
112068
121300
141403
2
2
1
1
2
1
1
1
Description
24 VAC Reversing Contactor
#10 x 1/2” Hex Head TEK Screw (green)
L-70 Ground Lug
5/16-18 Hex Nut
5/16” Lock Washer
24 VAC 3-Pole Blower Contactor
#10-16 x 1/2” Hex Washer TEK Screw
Transformer Assembly (460 VAC) for Micro Models ONLY
Transformer Assembly (460 VAC) for Non-Micro Models ONLY
End Stop
Mounting Plate ONLY
460 VAC Reversing Rear Electric Panel Assembly Complete
For Micro Models ONLY
(includes illus. nos. 1 through 16)
460 VAC Reversing Rear Electric Panel Assembly Complete
For Non-Micro Models ONLY
(includes illus. nos. 1 through 16)
#6-32 Pal Nut
#6-32 x 1-1/2” Phillips Pan Head Machine Screw
4-Position Terminal Block
1-Amp Double-Pole Circuit Breaker
35 x 15mm Din Rail (sold by the inch)
3-Phase (3ø) Power Input Label
Open/Closed Bushing
Control Voltage Transformer (24V) for Micro Models ONLY
Not available at time of printing. Contact factory for additional information.
Telephone: (508) 678-9000
Fax: (508) 678-9447
50
American Dryer Corporation
Steam Coil/Air Operated Steam Damper Assembly
88 Currant Road / Fall River, MA 02720-4781
Steam Coil/Air Operated Steam Damper Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
165011
153002
152004
152002
153007
820321
880280
1
6
6
4
4
2
1
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
152002
115995
102350
151006
152051
100495
323365
152002
153007
143163
143110
143163
100496
143238
100498
150002
153010
152000
330987
152002
153007
100520
4
60
1
1
1
1
2
2
2
1
1
1
1
1
1
2
2
2
1
2
2
1
Telephone: (508) 678-9000
51
Description
Steam Coil Assembly
5/16” Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4” Lock Washer
Steam Damper Hinge Assembly
Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
1/4-20 Hex Nut
Steam Damper Gasket (sold by the inch)
Steam Damper Foam (68-1/2” length)
5/16-24 Stainless Steel Acorn Nut
5/16-24 Right Hand Jam Nut
11/16” x 3” Stroke Piston
Left and Right Piston Support
1/4-20 Hex Nut
1/4” Lock Washer
1/4” x 1/8” Connector
1/4” Tubing (sold by the foot)
1/4” x 1/8” Connector
1/8” Needle Valve
1/8” Close Nipple
3-Way Micro Valve - 24 VAC
#6-32 x 1” Slotted Machine Screw
#6 Star Washer
#6-32 Hex Nut
Micro Valve Support Bracket
1/4-20 Hex Nut
1/4” Lock Washer
1/8” N.P.T. Silencer (muffler)
Fax: (508) 678-9447
52
88 Currant Road / Fall River, MA 02720-4781
Steam Coil/Mechanical Steam Damper Assembly Option
American Dryer Corporation
53
Steam Coil/Mechanical Steam Damper Assembly Option
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
165011
153002
152004
152002
153007
820321
880781
1
6
6
4
4
2
1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
115995
102350
309300
154300
153022
104052
150110
153012
312315
153022
154300
850268
150110
153012
312315
104054
100511
122120
150026
122120
150026
153012
150102
--------*
66
1
1
1
1
1
2
2
1
1
1
1
2
2
1
1
1
1
2
1
2
2
2
1
Description
Steam Coil Assembly
5/16” Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4” Lock Washer
Steam Damper Hinge Assembly
Steam Damper Assembly
(includes illus. nos. 7 through 10)
Steam Damper Gasket (sold by the inch)
Steam Damper Foam (68-1/2” length)
Rod Bracket
1/2” x 3/32” Cotter Pin
#10 Steel Burr
Mechanical Steam Damper Actuator Rod
#8-32 x 1/4” Phillips Head Machine Screw
#8 Star Washer
Mechanical Steam Damper Motor Mount
#10 Steel Burr
1/2” x 3/32” Cotter Pin
Mechanical Steam Damper Arm
#8-32 x 1/4” Phillips Head Machine Screw
#8 Star Washer
Mechanical Steam Damper Motor Mount
Mechanical Steam Damper Motor
Mechanical Steam Damper Switch Plate
Mechanical Steam Damper Switch
#4-40 x 5/8” Phillips Pan Head Machine Screw
Mechanical Steam Damper Switch
#4-40 x 5/8” Phillips Pan Head Machine Screw
#8 Star Washer
#8-32 x 3/8” Pan Head Machine Screw
Mechanical Steam Damper Motor Cam
* The mechanical steam damper motor cam is part of the mechanical steam damper motor.
Telephone: (508) 678-9000
Fax: (508) 678-9447
54
Outer Top/Back Guard Assemblies
Illus. No.
Part No.
Qty.
1
2
3*
322809
150301
314424
1
4
1
314422
150301
150300
312533
801577
322018
150301
103500
882099
1
7
10
1
1
1
13
4
1
4
5
6*
7
8
9
10
Description
Back Electrical Box Cover
#8-18 x 7/16” Phillips Pan Head TEK Screw
Top Back Guard
(for gas models Only)
Top Back Guard (for electric models Only)
#8-18 x 7/16” Phillips Pan Head TEK Screw
#10-16 x 1/2” Hex Washer TEK Screw
Outer Top (for gas models Only)
Outer Top (for electric models Only)
Bottom Back Guard
#8-18 x 7/16” Phillips Pan Head TEK Screw
Leveling Leg
8” to 10” Transition Piece
* There is no outer top or top back guard on steam models.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
55
Microprocessor Coin Acceptors Listing
NOTE: Coin acceptors listed include optical switch.
Replacement optic switch for Hanke acceptors is Part No. 881143.
Replacement optic switch for Greenwald acceptors is Part No. 137056.
Single Coin*
ADC Part No.
Nation
883363
United States
882689
United States
125100
U.S. and Canada
125107
881768
881604
125103
125121
125133
Australia
Australia
Japan
----Hong Kong
Description
25¢ Hanke Optic Coin Acceptor with Four (4) Studs
(for models mfd. as of June 25, 2002)
25¢ Hanke Optic Coin Acceptor
(for models mfd. between June 15, 2000 and June 25, 2002)
25¢ Greenwald Optic Coin Acceptor
(for models mfd. prior to June 15, 2000)
20¢ Greenwald Australian Optic Coin Acceptor
$1 Hanke Australian Optic Coin Acceptor
100 Yen Hanke Optic Coin Acceptor
0.882 Token Greenwald Optic Coin Acceptor
0.800 Token Greenwald Optic Coin Acceptor
$1 Greenwald Hong Kong Optic Coin Acceptor
Dual Coin*
881842
881542
881846
881541
*
Canada
United Kingdom
France
Netherlands
25¢ / $1 Hanke Dual Optic Coin Acceptor
1£ / 20 Pence Hanke Dual Optic Coin Acceptor
2 / 5 Franc Hanke Dual Optic Coin Acceptor
25¢ / 1 Guilder Hanke Dual Optic Coin Acceptor
Consult factory for coin acceptors not listed.
Telephone: (508) 678-9000
Fax: (508) 678-9447
56
Coin Meter Replacement Parts
Illus. No.
Part No.
Qty.
1
125541
125540
125500
125501
125502
125503
125504
125506
125507
125508
125510
125515
125516
1
1
1
1
1
1
1
1
1
1
1
1
2
2
3
4
American Dryer Corporation
Description
1/60 RPM 24 VAC / 60 Hz Meter Motor
1/30 RPM 24 VAC / 50 Hz Meter Motor
2-Point Cam
3-Point Cam
4-Point Cam
5-Point Cam
6-Point Cam
8-Point Cam
9-Point Cam
10-Point Cam
12-Point Cam
Meter Switch “B” with Arm
Meter Switch “A” or “C”
88 Currant Road / Fall River, MA 02720-4781
KW
VOLTAGE
PHASE
WIRE
ELEMENT
OVEN
ASSEMBLY*
Qty
WITH
OVEN WIRE
CRIMP TERMINAL
Kw Part No. Qty Size
Part No.
TERMINAL
LUG
Qty Part No.
BUS BAR
P/N:
121011
OVEN RELAY
Cat. No. Part No.
208
3ø
3 or 4
883615
6
5
120012
1
#4
882566
1
121010
1
DPA93
131358
30
240
3ø
3
824972
6
5
12 0 0 13
1
#4
882566
1
121010
1
DPA73
131376
30
4 16
3ø
3 or 4
826391
6
5
12 0 0 13
1
#8
882571
1
121010
1
DPA43
131357
30
460/480
3ø
3 or 4
824162
6
5
120013
1
#8
882572
1
121010
1
DPA43
13 13 5 7
25
380
3ø
3 or 4
826391
6
5
12 0 0 13
1
#8
882571
1
121010
1
DPA43
131357
24
208
3ø
3 or 4
824916
6
4
120010
1
#4
882566
1
112110
1
DPA73
131376
24
240
3ø
3
883614
6
4
120011
1
#6
882568
1
121010
1
DPA63
131369
24
460/480
3ø
3 or 4
883611
6
4
120011
1
#8
882572
1
121010
2
DPA33
13 13 5 2
20
208
1ø
2
824904
5
4
120010
1
#2
883384
1
121010
2
DPA93
131358
20
240
1ø
2
883612
5
4
120011
1
#4
883385
1
121010
2
DPA93
131358
20
380
3ø
3 or 4
883613
6
4
120010
1
#8
882571
1
121010
2
DPA33
131352
*When ordering Oven Assembly Complete, specify 3 or 4 wire when applicable as well as if dryer has Microprocessor controls.
57
Fax: (508) 678-9447
30
Electric Oven Component Application Chart
Telephone: (508) 678-9000
ADE-50V
58
Part No.
112533
112534
114001
114006
120800
120802
120902
120903
121499
121500
122804
404502
404506
404507
404513
404516
112146
112147
882206
Additional Parts Available
Description
“Phase 5 Coin Program Location Summary” Label
“Phase 5 OPL Program Location Summary” Label
“CAUTION Exhaust/Lint Screen” Label
“WARNING - Fire Hazards” Label
1/4” In-Line Connector
Red Butt Connector
#74B Wire Nut
Crimp-On Wire Nut
5-1/2” Harness Tie
8” Harness Tie
Manometer (hydro gauge) for measuring Gas Pressure
White Brush-In-Cap Bottle Touch-Up (0.6 oz. bottle)
Beige Brush-In-Cap Bottle Touch-Up Paint (0.6 oz. bottle)
Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint (0.6 oz. bottle)
Wrinkle Blue Brush-In-Cap Bottle Touch-Up Paint (0.6 oz. bottle)
Ivory Brush-In-Cap Bottle Touch-Up Paint (0.6 oz. bottle)
Phase 5 Coin User’s Manual
Phase 5 OPL User’s Manual
CD Rom (ADC Publications)
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADC 450345
1 - 06/14/00-25
2 * 09/27/01-25
3 * 11/05/02-15