Download American Dryer Corp. AD-27 User's Manual

AD-27 Parts Manual
Slide Meter/Phase 5
Single Coin Microprocessor
1995 Thru 2001
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: [email protected]
www.amdry.com
102395
060597/WM/tf
ADC Part No. 450163
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or
other flammable vapors or liquids
in the vicinity of this or any other
appliance.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables dans le voisinage de cet
appareil ou de yout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________
MODEL NO.
AD-27
__________________________________________
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s)
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory,
you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at
(508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so
that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
Table of Contents
OPL and Coin Control Door Assembly .................................................................................................. 2
OPL and Coin Control Door Assembly .................................................................................................. 3
High Security Control Door Assembly .................................................................................................... 4
Slide Meter Case Assembly ................................................................................................................... 5
Phase 5 Coin Microprocessor Control Panel Assembly .......................................................................... 6
Phase 5 Coin Microprocessor Control Panel Assembly .......................................................................... 7
Coin Vault Assembly .............................................................................................................................. 8
Phase 5 Coin and OPL Microprocessor Control Box Assembly .............................................................. 9
Main Door “Steel” Assembly ............................................................................................................... 10
Plastic Main Door Assembly ................................................................................................................ 11
Main Door Switch Assembly (Cold Rolled Steel [CRS] Type Door) ..................................................... 12
Plastic Main Door Switch Assembly ..................................................................................................... 13
Cold Rolled Steel (CRS) Front Panel Assembly ................................................................................... 14
Plastic Door Front Panel Assembly ...................................................................................................... 15
Basket (Tumbler) Bearing Assembly (as of April 3, 2001) ................................................................ 16, 17
Basket (Tumbler) Bearing Assembly (prior to April 3, 2001) ............................................................ 18, 19
Basket (Tumbler)/Support Assemblies .................................................................................................. 20
Idler Bearing Assembly ................................................................................................................... 21, 22
Lint Door Assembly (as of February 12, 2001) .................................................................................... 23
Lint Door Assembly (prior to February 12, 2001) ................................................................................ 24
Lint Trap Assembly .............................................................................................................................. 25
Sensor Bracket Assembly ............................................................................................................... 26, 27
Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly ................................................... 28, 29
Direct Spark Ignition (DSI) Burner Assembly For Models without Shutoff ....................................... 30, 31
Direct Spark Ignition (DSI) Burner Assembly .................................................................................. 32, 33
Sail Switch/ Hi-Limit Assembly ............................................................................................................ 34
Single-Phase (1ø) Motor, Electric Relay Panel Assembly ...................................................................... 35
Outer Top/Back Guard Assemblies ...................................................................................................... 36
Additional Parts Available .................................................................................................................... 37
2
OPL and Coin Control Door Assembly
For Models Mfd. as of March 20, 2001
Illus. No.
Part No.
Qty.
1
883100*
1
883103*
1
802514
117604
117604
152014
160040
160140
881053
3
2
5
2
2
1
2
3
4
5
6
7
8
*
Description
Control Door with Cold Rolled Steel (CRS) Trim with Hinge
(includes illus. nos. 1 through 5)
Slide Meter Control Door with Cold Rolled Steel (CRS) Trim and Hinge
(includes illus. nos. 1 through 5)
Cold Rolled Steel (CRS) Control Door Trim
1/8” x 3/8” Neoprene Sponge Tape
1/8” x 3/8” Neoprene Sponge Tape
1/4-20 Free Spin Wash Nut
XX4451 Lock ONLY
XX4451 Key ONLY
ADC Logo with Adhesive Tape
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
OPL and Coin Control Door Assembly
3
For Models Mfd. Between February 12, 2001 and March 20, 2001
Illus. No.
Part No.
Qty.
1
883099**
1
883102**
1
802514
117604
117604
152014
150420
160040
160140
881053
1
3
2
5
2
2
*
1
2
3
4
5
6
7
8
9
Description
OPL and Coin Control Door without Locks
(includes illus. nos. 1 through 5)
Slide Meter Control Door without Locks
(includes illus. nos. 1 through 5)
Control Door Trim (cold rolled steel [CRS])
1/8” x 3/8” Neoprene Sponge Tape
1/8” x 3/8” Neoprene Sponge Tape
1/4-20 Free Spin Wash Nut
#10-16 x 5/8” TEK-3 Tamperproof Screw
XX4451 Lock ONLY
XX4451 Key ONLY
ADC Logo with Adhesive Tape
* As required.
** Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
4
High Security Control Door Assembly
For Models Mfd. prior to February 12, 2001
Illus. No.
1
2
3
4*
5
6
7
8
9
*
Part No.
Qty.
160040
160140
881053
870011
881137
2
2
1
1
1
882771
1
150201
117603
180206
150420
150421
117603
4
3
1
6
1
1
Description
High Security Control Door Lock ONLY (keyed XX4451)
Key ONLY For High Security Control Door Lock (keyed XX4451)
ADC Logo with Tape
Double Sided Tape Kit
Control Door Assembly Complete
For Models Mfd. with Slide Meter Controls ONLY
(includes illus. nos. 4 through 7 and 9)
Microprocessor Control Door Assembly Complete
For Models Mfd. with Microprocessor Controls ONLY
(includes illus. nos. 4 through 7 and 9)
#10-32 x 1/4” Phillips Round Head Machine Screw
Suppressor Tape/Gasket (sold by the foot)
Gray Top Trim with 2 Lock Holes
#10-16 x 5/8” TEK-3 Tamperproof Screw
Tamperproof Screw Hand Driver
Suppressor Tape/Gasket (sold by the foot)
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
5
Slide Meter Case Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Part No.
Qty.
160099
160199
125908
125905
122643
122642
152014
122603
122631
881100
122701
125900
154001
150300
881015
1
1
1
1
9
1
4
1
2
1
21
1
2
4
1
880937
122400
131917
123005
883044
883045
883046
--------------801701
102503
102601
102603
150207
883037
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
Telephone: (508) 678-9000
Description
Lock/Key/Cam and Hardware (keyed GR100)
Key ONLY For Slide Meter Lock (keyed GR100)
Slide Meter Accumulator 24 VAC (specify timing)
Slide Meter - 24 VAC/50 Hz
Pin ONLY
9-Position Mini-Universal Socket
1/4-20 Free Spin Washer
9-Position Connector (mate-n-lock)
6-Position Connector (mate-n-lock)
Slide Meter Modular J-Box
Socket Terminal ONLY
Slide Meter Case ONLY with Door Less Lock
#10-24 Speed Nut
#10 x 1/2” Hex Head TEK Screw
Chute Meter Faceplate Complete
(includes illus. nos. 11 and 13 through 16)
Chute Meter Faceplate ONLY
Rocker Heat Selector Switch
Push to Start Relay - 24 VAC
Red Indicator Light - 24 VAC
Slide Meter Extension (white)
Slide Meter Extension (coral blue)
Slide Meter Extension (ivory)
Typical Slide Meter Coin Chute (not available from ADC)
Coin Box Assembly (not available from ADC)
Slide Meter Case Mounting Plate
Control Door Support Rod
Control Door Support Rod Retainer Clip
Control Door Support Rod Catch
#10-24 x 1/2” Round Head Machine Screw
White Slide Meter Timer Door
Fax: (508) 678-9447
6
Phase 5 Coin Microprocessor Control Panel Assembly
For Models Mfd. as of March 12, 2001
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
*
Part No.
Qty.
112526
881506
1
1
881507
1
881540
881430
150309
137213
824998
153010
150005
--------137056
137023
137021
880772
824080
122800
136048
1
1
1
1
1
2
2
1
1*
1*
3*
1
1
1
1
Description
Coin Keyboard Label Assembly
Coin Control Panel Assembly Less Acceptor
(includes illus. nos. 1, 2, 4, 5, 6, and 11)
Coin Control Panel Assembly with Battery Bracket Less Acceptor
(includes illus. nos. 1, 2, 4, 5, 6, and 11)
Coin Control Panel ONLY
Coin Control Panel with Battery Bracket ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Phase 5 Coin Controller ONLY
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 1/4” Phillips Round Head Machine Screw
Microprocessor Coin Acceptor with Optical Switch
Optic Switch ONLY
Optic Switch Connector ONLY
Microprocessor Socket ONLY
Single Coin Optical Switch Harness
Dual Coin Optical Switch Harness
Microprocessor (female) Pin Extraction Tool
1/8-Amp (slo blo) Fuse ONLY
For dual coin models, double the quantity.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
7
Phase 5 Coin Microprocessor Control Panel Assembly
For Models Mfd. prior to March 12, 2001
Illus. No.
1
2
3
4
5
6
7
8
9
10
---11
Part No.
Qty.
112526
880959
1
1
880958
150309
137213
824998
153010
150005
-------137056
137023
137021
880772
824080
122800
136048
1
1
1
1
2
2
1
1
1
3
1
1
1
1
Description
Coin Keyboard Label Assembly
Phase 5 Coin Microprocessor Control Panel Assembly
(includes illus. nos. 1, 2, 4, 5, 6, and 11)
Coin Control Panel ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Phase 5 Coin Microprocessor Controller (computer) ONLY
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 1/4” Phillips Round Head Machine Screw
Microprocessor Coin Acceptor with Optical Switch
Optical Switch ONLY
Optical Switch Connector ONLY
Microprocessor Socket ONLY
Single Coin Optic Switch Harness
Dual Coin Optic Switch Harness
Microprocessor (female) Pin Extraction Tool
1/8-Amp (slo blo) Fuse ONLY
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller.
Telephone: (508) 678-9000
Fax: (508) 678-9447
8
Coin Vault Assembly
Illus. No.
*
Part No.
Qty.
1
881431
1
2
3
802121
160006
875061
1
1
1
4
160105*
802020
1
1
5
6
7
8
9
10
802019
802018
152014
309250
102503
102601
102603
1
1
4
1
1
1
1
Description
Microprocessor Coin Vault Assembly Complete
(includes illus. nos. 1 through 6)
Microprocessor Coin Vault ONLY
Cam For 1/4-Turn Lock ONLY
1/4-Turn Lock Assembly
(includes illus. nos. 2 and 3)
1/4-Turn Mer-Pel Key ONLY
1/4-Turn Coin Box Assembly
(includes illus. nos. 2 through 5)
1/4-Turn Coin Box ONLY without Faceplate
1/4-Turn Coin Box Faceplate ONLY
1/4-20 Free Spin Wash Nut
Coin Vault Slot Cover
Control Door Support Rod
Control Door Rod Retainer Clip
Control Door Support Rod Catch
Specify key number when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Phase 5 Coin and OPL Microprocessor Control Box Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
*
Part No.
141403
150300
120715
150002
151000
136057
150411
136008
122641
122706
121400
Qty.
1
2
1
2
2
*
*
*
1
*
1
9
Description
Step Down Transformer (24 VAC)
#10-16 x 1/2” Hex Washer TEK Screw
30-Position Terminal Block
#6-32 x 1” Slotted Round Head Machine Screw
#6-32 Pal Nut
1/2-Amp (slo blo) Fuse
#8-18 x 3/8” Phillips Pan Head Screw
Fuse Block/Strip ONLY
15-Pin Microprocessor Connector
Socket Terminal ONLY
7/8” Universal Bushing
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
10
Main Door “Steel” Assembly
For Models Mfd. as of February 12, 2001
Illus. No.
Part No.
Qty.
1
881150
1
2
3
102354
170730
170731
881152
1
1
1
1
4
5
6
150445
153031
881151
2
1
1
7
150445
150443
150683
152014
151010
150120
150683
152014
881210
102218
102360
102211
2
2
3
3
1
1
3
3
1
1
1
1
170731
151013
1
4
8
9
10
11
12
13
14
15
16
American Dryer Corporation
Description
Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
Door Gasket
Clear Glass Adhesive (10.3 oz. cartridge)
Black Glass Adhesive (10.3 oz. cartridge)
Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
1/4-20 x 3/4” Black Cap Head Setscrew
1/4” Nylon Washer
Black Bottom Hinge Block Assembly
(includes illus. nos. 5, 6, and 7)
1/4-20 x 3/4” Black Cap Head Setscrew
1/4-20 x 3/4” Stainless Steel Cap Head Setscrew
1/4-20 x 5/8” Black Carriage Bolt
1/4-20 Free Spin Wash Nut
#10-32 Black Hex Acorn Nut
Door Latch Screw
1/4-20 x 5/8” Black Carriage Bolt
1/4-20 Free Spin Wash Nut
Black Main Door Handle ONLY
20-7/16” Door Glass with Four (4) Holes for Mechanical Fasteners
Glass/Door Gasket Tape
Door Glass with Notch (for cold rolled steel [CRS] door without
mechanical fasteners)
Black Glass Adhesive (10.3 oz. cartridge)
#10-32 Black Nylon Acorn Nut
88 Currant Road / Fall River, MA 02720-4781
Plastic Main Door Assembly
11
For Models Mfd. prior to February 12, 2001
Illus. No.
Part No.
Qty.
1
881421
1
2
3
4
5
6
800448
150410
152014
102349
102212
170730
150448
170319
150431
1
4
4
1
1
1
4
4
1
7
8
9
Telephone: (508) 678-9000
Description
Gray Plastic Main Door Assembly Complete with Mechanical Fasteners
(includes illus. nos. 1 and 5 through 9)
12-1/2” Stainless Steel Main Door Hinge Assembly
#10-24 x 3/8” Phillips Pan Head Taptite Screw
1/4-20 Free Spin Wash Nut
Main Door Gasket
20-7/16” Door Glass with Four (4) Holes
Main Door Glass Adhesive (10.3 oz. cartridge)
1/2” Stainless Steel Flat Head Allen Screw
Door Glass (nylon) Spacer
Main Door Latch Screw
(#10 x 7/16” dome hex head)
Fax: (508) 678-9447
12
Main Door Switch Assembly (Cold Rolled Steel [CRS] Type Door)
For Models Mfd. as of February 12, 2001
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
150006
152013
153010
137005
122636
881211
881153
2
2
2
1
2
1
1
7
150301
2
American Dryer Corporation
Description
#6-32 x 7/8” Phillips Pan Head Machine Screw
#6-32 Hex Nut
#6 Star Washer
Door Switch ONLY
Flag Terminal
Black Main Door Switch Housing ONLY
Black Main Door Switch Housing Complete
(includes illus. nos. 1, 2, 3, 4, and 6)
#8-18 x 7/16” Phillips Pan Head TEK Screw
88 Currant Road / Fall River, MA 02720-4781
Plastic Main Door Switch Assembly
13
For Models Mfd. prior to February 12, 2001
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
152013
153008
137005
121028
154281
800448
2
2
1
2
2
1
7
8
9
10
153565
881246
150201
121405
2
1
2
1
Telephone: (508) 678-9000
Description
#6-32 Hex Nut
#6 Lock Washer
Single Pole Door Switch
Insulated Female Terminal
3/8” Standard Nylon Spacers
12-1/2” Stainless Steel Main Door Hinge Assembly
(includes illus. nos. 6 and 7)
#6-32 x 1” Self Clinching Stud
Main Door Switch Housing
#10-32 x 1/4” Phillips Pan Head Screw
Rubber Grommet
Fax: (508) 678-9447
14
Cold Rolled Steel (CRS) Front Panel Assembly
For Models Mfd. as of February 12, 2001
Illus. No.
Part No.
Qty.
1
2
3
4
881266*
154215
170330
150309
150313
1
2
1
9
9
*
Description
Front Panel Assembly (cold rolled steel [CRS] door)
1/8” Pop Rivets
Friction Door Latch
#10-16 x 1/2” Hex Head TEK Crimptite Screw
TORX Head Screw
(for models mfd. as of October 2, 2000)
Specify color when ordering
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Plastic Door Front Panel Assembly
15
For Models Mfd. prior to February 12, 2001
Illus. No.
Part No.
Qty.
1
881175*
1
2
3
4
5
154215
170330
150309
121405
2
1
9
1
*
Description
Front Panel Assembly Complete without Hinge
(includes illus. nos. 1 through 3 and 5)
5/32” Pop Rivet
Friction Door Latch
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Rubber Grommet
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
16
Basket (Tumbler) Bearing Assembly
For Models Mfd. as of April 3, 2001
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Bearing Assembly
17
For Models Mfd. as of April 3, 2001
Illus. No.
1
2
3
4
Part No.
Qty.
880209
153005
152005
882544
1
12
4
1
882545
1
882542
882543
1
1
5
880202
880779
1
1
6
7
8
9
10
11
12
13
14
15
16
150601
153004
153005
152005
154326
152004
150621
153002
150501
102120
824807
2
8
2
2
2
4
2
4
4
1
1
17
18
19
20
100713
101100
100100
150610
1
1
1
2
Telephone: (508) 678-9000
Description
1-3/8” 4 Bolt Pressed Steel Round Bearing
3/8” Lock Washer
3/8-16 Hex Nut
Pillow Block Bearing Assembly Complete
(includes illus. nos. 4 through 16 and 20)
Bearing Assembly Complete
(for models mfd. with rotational sensor)
Bearing Support ONLY
Bearing Support ONLY
(for models mfd. with rotational sensor)
1-3/8” Pillow Block Bearing ONLY
1-3/8” Pillow Block Bearing
(for models mfd. with rotational sensor)
3/8-16 x 2” Hex Bolt
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-24 x 3/8” Setscrew Black
5/16-18 Hex Nut
5/16-18 x 1-1/2” Tap Bolt
5/16” Lock Washer
5/16-18 x 3/4” Tap Bolt
Sintered 8 Magnet
Rotational Sensor Assembly
(for models mfd. with rotational sensor)
1/4” x 1/4” x 7/8” Key
18” Pulley
5L-660 V-Belt (to idler assembly)
5/16-18 x 1-1/2” Allen Setscrew
Fax: (508) 678-9447
18
Basket (Tumbler) Bearing Assembly
For Models Mfd. prior to April 3, 2001
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Bearing Assembly
19
For Models Mfd. prior to April 3, 2001
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
*
Part No.
Qty.
880203
153005
152005
150508
153005
152005
150600
153004
153005
152005
150501
153005
153004
150621
152005
801101
1
4
4
2
2
2
2
2*
2*
2*
4
4
4
2
2
1
801103
1
801105
801104
880202
152004
150610
101100
154301
100713
100111
1
1
1
2
2
1
2
1
1
Description
1-3/8” Flange Bearing
3/8” Lock Washer
3/8-16 Hex Nut
3/8-16 x 3/4” Hex Head Machine Bolt
3/8” Lock Washer
3/8-16 Hex Nut
3/8-16 x 1-1/2” Hex Head Machine Bolt
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-18 x 3/4” Hex Head Machine Bolt
3/8” Lock Washer
3/8” Flat Washer
5/16-18 x 1-1/2” Hex Head Machine Bolt
3/8-16 Hex Nut
1-3/8” Bearing Box Assembly Complete
(includes illus. nos. 4 through 20)
1-3/8” Bearing Box and Support ONLY
(includes illus. nos. 4 through 6, 16, and 17)
1-3/8” Bearing Box ONLY
Pillow Block Bearing Support ONLY
1-3/8” Pillow Block Bearing ONLY
5/16-18 Hex Nut
5/16-18 x 1-1/2” Allen Setscrew
18” Pulley
5/16-18 x 5/16” Allen Setscrew
1/4” x 1/4” x 7/8” Key
5L-650 V-Belt (basket [tumbler] to idler)
Some models require a quantity of 4.
Telephone: (508) 678-9000
Fax: (508) 678-9447
20
Illus. No.
1
*
Basket (Tumbler)/Support Assemblies
Part No.
Qty.
800830
1
800890
1
800720*
1
800840*
1
2
301315
301316
301414
301415
2
1
2
1
3
4
5
6
7
8
9
10
11
150518
100915
153004
150309
800612
152005
153005
153001
116003
401010
1
3
3
30
1
3
3
3
1
1
Description
Basket (tumbler) and Support Assembly Complete with Felt Collar
(includes illus. nos. 1 through 11)
Stainless Steel Basket (tumbler) and Support Assembly Complete with Felt
Collar
(includes illus. nos. 1 through 11)
Basket (tumbler) ONLY
(includes illus. nos. 1, 2, and 6)
Stainless Steel Basket (tumbler) ONLY
(includes illus. nos. 1, 2, and 6)
Basket (tumbler) Rib ONLY (short)
Basket (tumbler) Rib ONLY (tall)
Stainless Steel Basket (tumbler) Rib ONLY (short)
Stainless Steel Basket (tumbler) Rib ONLY (tall)
(includes illus. nos. 1, 2, and 6)
5/16-18 x 3/8” Socket Button Head Screw
3/8-16 x 31” Tie Rod
3/8” Flat Washer
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Basket (tumbler) Support ONLY
3/8-16 Hex Nut
3/8” Split Lock Washer
5/16” Flat Washer
Felt Collar ONLY
#847 Adhesive For Felt Collar (5.0 oz. tube)
Felt collar is not included and must be ordered separately.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Idler Bearing Assembly
Telephone: (508) 678-9000
21
Fax: (508) 678-9447
22
Illus. No.
Idler Bearing Assembly
Part No.
Qty.
1
2
3
4
5
6
7
8
9
10
11
100111
101129
100105
154301
100705
301850
150529
100214
153007
152002
801008
1
1
1
2
1
1
3
2
3
3
1
12
13
14
15
16
17
18
19
20
21
22
100406
150613
150617
153005
153004
152020
152004
152005
153005
150617
301851
801009
1
1
2
2
2
1
1
1
1
1
1
1
American Dryer Corporation
Description
5L-650 V-Belt (idler to basket [tumbler])
9” x 2-1/2” Compound Pulley
4L-520 V-Belt (idler to motor)
5/16-18 x 5/16” Allen Setscrew
3/16” x 3/16” x 1-3/8” Key
5/8” x 3/4” Idler Shaft
1/4-20 x -1/4” Carriage Bolt
5/8” Flange Bearing
1/4” Lock Washer
1/4-20 Hex Nut
Idler Bearing Assembly Complete
(includes illus. nos. 6 through 22)
Idler Bearing Mount ONLY
5/16-18 x 4” Hex Head Machine Bolt
3/8-16 x 1” Hex Head Machine Bolt
3/8” Lock Washer
3/8” Flat Washer
5/16-18 Standard Square Nut
5/16-18 Hex Nut
3/8-16 Hex Nut
3/8” Lock Washer
3/8-16 x 1” Hex Head Machine Bolt
Idler Bracket Adjustment Plate
Idler Square Washer
88 Currant Road / Fall River, MA 02720-4781
23
Lint Door Assembly
For Models Mfd. as of February 12, 2001
Illus. No.
Part No.
Qty.
1
2
3
882981*
170226
117604
1
1
2
*
Description
Right Hand Hinge Lint Door Assembly with Slide Latch
Slide Latch Flush Style (black)
1/8” x 3/8” Neoprene Sponge Tape
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
24
Lint Door Assembly
For Models Mfd. prior to February 12, 2001
Illus. No.
*
Part No.
Qty.
1
800150
1
2
3
4*
160200
160009
150425
881138
1
1
1
1
5
6
117604
150309
7
5
Description
Knob Latch Kit Complete
(includes illus. nos. 1 through 3)
Knob Latch ONLY with Two (2) Screws
Adjustable Cam ONLY
#12-24 x 3/8” Cam Screw
Right Hand Lint Door Assembly Complete
(includes illus. nos. 4 through 6)
1/8” x 3/8” Neoprene Sponge Tape
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
25
Lint Trap Assembly
Illus. No.
Part No.
Qty.
1
800410
1
2
3
4
5
6
7
8
800411
154200
304102
150300
800503
323724
122116
150300
1
7
1
2
1
1
1
2
Telephone: (508) 678-9000
Description
Lint Trap Assembly Complete
(includes illus. nos. 1, 3, 4, and 5)
Lint Trap ONLY
5/32” Pop Rivet
Lint Screen Holder ONLY
#10-16 x 1/2” Hex Washer TEK Screw
Lint Screen ONLY
Lint Door Switch Bracket
Lint Door Switch
#10-16 x 1/2” Hex Washer TEK Screw
Fax: (508) 678-9447
26
Sensor Bracket Assembly
Microprocessor
Sensor
Bracket
Assembly
Noncomputer
Sensor
Bracket
Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Sensor Bracket Assembly
Illus. No.
Part No.
Qty.
1
880251
1
2
3
4
5
6
7
8
9
10
130301
153010
152000
121028
122701
122605
154007
150005
801425
1
2
2
2
4
1
2
2
1
11
12
13
14
15
16
17
18
19
20
21
22
23
24
305007
122604
122700
150411
150005
130111
130100
130301
130106
153010
152000
840065
121028
122701
122605
840062
1
1
4
2
5
1
1
1
1
5
5
1
8
4
1
1
25
801418
1
305007
122604
122700
122801
150411
1
1
4
1
2
26
27
28
Telephone: (508) 678-9000
27
Description
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 and 5 through 8)
225° Large Automatic Thermostat
#6 Star Washer
#6-32 Hex Nut
Insulated Terminal ONLY
Socket Terminal ONLY
4-Pin Socket Connector ONLY
1/4” Tinnerman Push On Fastener
#6-32 x 1/4” Round Head Machine Screw
Microprocessor Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 10)
Universal Sensor Bracket ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
#8-18 x 3/8” Phillips Pan Head TEK Screw
#6-32 x 1/4” Round Head Machine Screw
130° Large Thermostat
150° Large Thermostat
225° Large Automatic Reset Thermostat
170° Large Thermostat
#6 Star Washer
#6-32 Hex Nut
Sensor Jumper (4) ONLY
Insulated Terminal ONLY
Socket Terminal ONLY
4-Pin Socket Connector ONLY
Sensor (4) Bracket Harness Assembly
(includes illus. nos. 22, 23, and 24)
Noncomputer Sensor (4) Bracket Assembly Complete with Thermostats
(includes illus. nos. 14 through 25)
Universal Sensor Bracket ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool
#8-18 x 3/8” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
28
Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
Illus. No.
Qty.
1
2
100105
101131
1
1
3
4
5
6
150501
153002
153001
100065*
4
4
4
1
7
122701
122801
137030
152004
153002
153001
117604
154000
800909
803966*
8
1
1
4
4
4
4
4
1
1
153050
100604
100702
153050
152006
2
1
1
2
2
8
9
10
11
12
13
14
15
16
17
18
19
*
Part No.
29
Description
4L-520 V-Belt (motor to idler)
1/2” x 2-1/4” Motor Pulley
(for 60 Hz models Only)
5/16-18 x 3/4” Hex Head Machine Bolt
5/16” Lock Washer
5/16” Flat Washer
1/2 HP 100-230v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor with Plug
Socket Terminal ONLY
Pin/Socket Extraction Tool
8-Pin Housing Connector
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
1/8” x 3/8” Neoprene Sponge Tape
5/16-18 Tinnerman Nut
1/2 HP Motor Mount ONLY (56Z frame)
1/2 HP 120-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor Mount with Plug Motor
(includes illus. nos. 3 through 7 and 13 through 20)
1/2” S.A.E. Flat Washer
12-1/2” Impellor with 1/2” Bore
1/8” x 1/8” x 1-1/2” Key
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
30
American Dryer Corporation
Direct Spark Ignition (DSI) Burner Assembly
For Models without Shutoff
88 Currant Road / Fall River, MA 02720-4781
Direct Spark Ignition (DSI) Burner Assembly
31
For Models without Shutoff
Illus. No.
Part No.
Qty.
1
2
3
4
14
141104
151001
150108
140851*
140802*
141230
150309
318716
128927
880960
140411
142707
142506
142600
142800
882769**
882770**
850850
880134
2
2
2
2
2
1
5
1
1
1
1
1
1
1
1
1
1
1
1
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
880330
150300
318700
154004
802799
122200
150303
105500
319202
154002
319704
150001
130201
151000
152013
128935
810030
1
9
1
1
1
1
2
1
1
1
1
2
1
2
2
1
1
5
6
7
8
9
10
11
12
13
Description
Small Burner Tube
#8-32 Pal Nut
#8-32 x 1/2” Pan Head Machine Screw
#32 (natural gas) Burner Orifice
#50 (liquid propane [L.P.] gas) Burner Orifice
1/2” 2-Port Manifold
#10-16 1/2” Hex Head TEK Crimptite Screw
Gas Valve Bracket
1/2” 24 VAC Redundant (natural gas) Gas Valve
1/2” 24 VAC Redundant (liquid propane [L.P.] gas) Gas Valve Assembly
1/2” Gas Valve Liquid Propane (L.P.) Conversion Kit
1/2” x 1 1/2” B.I. Nipple
1/2” x 1/2” Street Elbow
1/2” Black Union
1/2” x 18” Pipe
Natural Gas Burner Assembly Complete Less Orifice
Liquid Propane (L.P.) Gas Burner Assembly Complete Less Burner Orifice
Burner Box ONLY
Ignitor Flame-Probe Kit Assembly
(includes high voltage [H.V.] wire and connector)
High Voltage (H.V.) Wire and Connector Assembly
#10-16 x 1/2” Hex Washer TEK Screw
Pipe Bracket
Twin Speed Nut
Sail Switch Cover and Bracket ONLY
Sail Switch ONLY
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
Hi-Limit Mounting Bracket
#6-32 x 1/2” Phillips Round Head Machine Screw
330° Manual Reset Hi-Limit
#6 x 32 Pal Nut
#6-32 Hex Nut
Direct Spark Ignition (DSI) Module with Three (3) Tries
Direct Spark Ignition (DSI) Module Mounting Bracket
* Consult factory for elevations over 2,000 feet.
** Burner orifices are not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
32
American Dryer Corporation
Direct Spark Ignition (DSI) Burner Assembly
88 Currant Road / Fall River, MA 02720-4781
33
Direct Spark Ignition (DSI) Burner Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
318030
150300
150309
128915
880134
1
2
2
1
1
5
6
7
8
9
10
880330
150103
153000
151001
141104
140851*
140802*
141230
318700
150300
128927
880960
140411
881367
142800
150309
318700
850850
809640**
1
2
2
2
2
2
2
1
1
2
1
1
1
1
1
4
2
1
1
809641**
1
881134*
880815
801031
150299
150300
1
1
1
4
2
11
12
13
14
15
16
17
18
19
-20
21
22
23
Description
Direct Spark Ignition (DSI) Burner Shield
#10-16 x 1/2” Hex Head TEK Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Direct Spark Ignition (DSI) Ignitor/Flame-Probe Assembly
Ignitor/Flame-Probe Kit Assembly
(includes illus. nos. 4 and 5)
High Voltage (H.V.) Wire and Connector Assembly
#8-32 x 1/2” Pan Head Machine Screw
#8 Steel Burr
#8-32 Pal Nut
Small Tube Burner
#32 (natural gas) Burner Orifice
#50 (liquid propane [L.P.] gas) Burner Orifice
1/2” Direct Spark Ignition (DSI) Manifold (2-port)
Pipe Bracket (bent)
#10-16 x 1/2” Hex Washer TEK Screw
1/2” 24 VAC Redundant (natural gas) Gas Valve
1/2” 24 VAC Redundant (L.P. gas) Gas Valve
1/2” Valve L.P. Conversion Kit
1/2” Union Shutoff with Tail Piece
1/2” x 18” Pipe
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Pipe Bracket (bent)
Non-Heat Reclaimer Burner Box ONLY
Burner (natural gas) Assembly Complete Less Orifices
(includes illus. nos. 1 through 9 and 11 through 23)
Burner (L.P. gas) Assembly Complete Less Orifices
(includes illus. nos. 1 through 9 and 11 through 23)
Direct Spark Ignition (DSI) (L.P.) Conversion Kit
Direct Spark Ignition (DSI) Module ONLY (50/60 Hz)
Direct Spark Ignition (DSI) Module Plate
#10 x 1/2” Hex Washer
#10-16 x 1/2” Hex Head TEK Screw
* Consult factory for elevations over 2,000 feet.
** Burner orifices are not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
34
Illus. No.
Sail Switch/Hi-Limit Assembly
Part No.
Qty.
1
2
3
4
5
6
7
8
9
154004
150309
802799
150303
122200
105500
319202
154002
802801
1
2
1
2
1
1
1
1
1
10
11
12
13
14
15
802800
142809
150309
319704
151000
150001
130401
1
1
2
1
2
2
1
American Dryer Corporation
Description
Twin Speed Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Sail Switch Box Cover and Bracket ONLY
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
Sail Switch Box Assembly Complete
(includes illus. nos. 1 through 9)
Sail Switch Box with Cover and Bracket ONLY
1/2” x 29-1/8” Pipe
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Hi-Limit Mounting Bracket ONLY
#6-32 Pal Nut
#6-32 x 1/2” Round Head Machine Screw
330° Hi-Limit
88 Currant Road / Fall River, MA 02720-4781
35
Single-Phase (1ø) Motor, Electric Relay Panel Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
--*
Part No.
132475
150299
150300
141403
136057
150411
136008
150002
120715
151000
153002
152004
305520
322809
150411
Qty.
1
2
2
1
*
*
*
2
1
2
1
1
1
1
4
Description
2-Pole Contactor - 24 VAC
#10 x 1” Hex Washer TEK Screw
#10 x 1/2” Hex Washer TEK Screw
Control Voltage Transformer - 24 VAC
1/2-Amp (slo blo) Fuse
#8-18 x 3/8” Phillips Pan Head TEK Screw
Fuse Block/Strip ONLY
#6-32 x 1” Round Head Machine Screw
30-Position Terminal Block
#6-32 Pal Nut
5/16-18 Lock Washer
5/16-18 Hex Nut
Rear Contactor Plate
Back Electrical Box Cover...Not Illustrated
#8-18 x 3/8” Phillips Pan Head TEK Screw...Not Illustrated
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
36
Illus. No.
1
2
3
4
5
6
7
8
9
Outer Top/Back Guard Assemblies
Part No.
322809
150411
330661
150411
150411
330607
330609
150411
103500
Qty.
1
3
1
8
8
1
1
10
4
American Dryer Corporation
Description
Back Electrical Box Cover ONLY
#8-18 x 3/8” Phillips Pan Head TEK Screw
Top Back Guard ONLY
#8-18 x 3/8” Phillips Pan Head TEK Screw
#8-18 x 3/8” Phillips Pan Head TEK Screw
Outer Top Guard ONLY
Lower Back Guard ONLY
#8-18 x 3/8” Phillips Pan Head TEK Screw
Leveling Leg
88 Currant Road / Fall River, MA 02720-4781
Additional Parts Available
Part No.
Description
112533
112039
114006
112280
114001
120800
120802
120902
120903
121014
121026
121499
121500
121503
122804
404500
404502
404506
404507
880200
“Phase 5 Coin Program Location Summary” Label
“Black/White/Green Ground” Label
“WARNING - Fire Hazards” Label
“Clean Lint Screen” Label
“CAUTION - Exhaust/Lint Screen” Label
1/4” In-Line Connector
Red Butt Connector
#74B Wire Nut
Crimp-On Wire Nut
1/4” Insulated (female) Terminal
Tab Receptacle Combination
5-1/2” Harness Tie
8” Harness Tie
Harness Tie Mounting Clip
Manometer (hydro gauge)
Almond Brush-In-Cap Bottle Touch-Up Paint
White Brush-In-Cap Bottle Touch-Up Paint
Beige Brush-In-Cap Bottle Touch-Up Paint
Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint
Electrical Terminal (assortment) Kit
Telephone: (508) 678-9000
37
Fax: (508) 678-9447
ADC 450163
1 - 10/31/95-50
2 * 02/25/98-50
3 * 10/26/01-25