Transcript
American DJ R DP-DMX4B User Instructions Thank you for purchasing the DP-DMX4B by American DJ For your convenience, this DP-DMX4B has been tested and is ready to be used, there is no assembly required. R Product Descriptions: The DP-DMX4B is a 4 channel DMX dimmer pack, it can extend to a maximum of 512 channels using DMX 512 protocol. The DP-DMX4B features include: zero-crossing circuitry for protection of inductive loads; each 3-prong Edison sockets for each channel; individual 6 A fuse for each channel; XLR connection and a maximum output load of 5A per channel or 20A total. 1 General Functions: (1-10 Switches) 2 1 1 11 SWITCHES ON 1,2,4 2 2 12 3,4 3 1 MD ON 1,2 DMX Address Setting 1 2 3 4 5 6 7 8 9 10 START CH# Switch# 1 2 3 4 5 6 7 8 9 10 On 1. Channel Output: 5A per channel, Total 20A 2. Channel LEDs: These LEDs indicate the dimming, On/Off of the appropriate channels. 3. DMX Dip Switches: Slide these dip switches to select desired DMX address(DMX addressing is printed on the top cover of the DP-DMX4B.) 4. Power LED: The LED is lit when power is on. 5. DMX LED: This LED begins flashing when DMX signal is present. 6. Power Switch: Turns on/off the main power. 7. POWER INPUT: AC 120V~60Hz, 20A max. 8. DMX Input: This connector accepts your DMX input signals. 9. DMX Output: This connector sends your DMX input signal through to the next DMX device. SWITCHES ON Switch 1,3,4 13 4 3 14 2,3,4 5 1,3 15 1,2,3,4 1 2 4 8 Binary 6 2,3 : : 7 1,2,3 : : 8 4 : : 9 1,4 511 1,2,3,4,5,6,7,8,9 10 2,4 512 3 Off DMX Address Table START CH# 16 32 64 128 256 512 Value 4 Address 105 10 DP-DMX4B 1 2 3 4 2 4 3 American DJ POWER INDICATOR MD ON R DMX INDICATOR 1 2 3 4 5 6 7 8 9 10 DMX Address 5 OUTPUT: 5A/CH, TOTAL 20A MAX 6 This product must not be continuously used for a long time under 20A total output load Technical Specifications: Power Input ...................... AC 120V~60Hz, 20A max. Channel Output ............................ 5A/CH., Total 20A Fuse(Internal) ............... F6A 250V 5x20mm(x4PCS) Dimensions ..................................... 197x124x60mm Weight ............................................................. 1.2 Kg LOADING FUSE: (INTERNAL) POWER INPUT AC120V~ 60Hz, 20A MAX 7 POWER DMX OUT DMX IN F6A 250V 5x20mm (x4pcs) 2 3 1 1=Ground 2=Data- 1 3 2 3=Data+ CAUTION RISK OF ELECTRIC SHOCK DISCONNECT INPUT POWER BEFORE OPENING MADE IN PRC 23-020-0121 N'OUVREZ PAS..RISQUE DE CHOC ELECTRIQUE WARNING: THIS APPARATUS MUST BE EARTHED 8 9 CAUTION! No user serviceable parts inside do not attempt repairs. In the event your unit should fail, contact your American DJ dealer. WARNING! This Product must be earthed. This product is intended for indoor use only. To prevent fire or shock hazard, do not expose this product to a high temperature or high humidity area. R 24-004-0668 Rev 1.0
