Download American Dish Service ADC-66 L-R/R-L User's Manual

EFFECTIVE: MAY, 2008
American Dish Service
ADS CONVEYOR DISHWASHER
MODELS: ADC-66 L-R/R-L
PARTS MANUAL
900 Blake Street
Edwardsville, Kansas 66111
(913)422-3700
© 05/08
213-0066 L-R / 214-0066 R-L
ADC-66 Conveyor
Dishwasher
American Dish Service
2
213-0066 L-R / 214-0066 R-L
ADC-66 Conveyor
Dishwasher
Page
No.
Part No.
No.
Req.
4-7
8-11
12-15
16-19
20-23
20-23
24-25
26-27
26-27
28-29
28-29
30-33
30-33
34-37
34-37
38-39
40-41
42-43
44-45
261-0300
261-0400
268-1000
268-1100
265-0900
265-1000
263-0100
263-0300
263-0400
263-0600
263-0700
264-0500
264-0600
265-1100
265-1200
268-1200
268-1300
266-0700
266-0800
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
American Dish Service
Description
Cabinet Assembly, ADC-66, L-R
Cabinet Assembly, ADC-66, R-L
Conveyor Drive & Tray Track Control, ADC-66, L-R
Conveyor Drive & Tray Track Control, ADC-66, R-L
Spray System Assembly, ADC-66, L-R
Spray System Assembly, ADC-66, R-L
Wash Pump Assembly, ADC-66, L-R, R-L
Rinse Pump Assembly, ADC-66, L-R
Rinse Pump Assembly, ADC-66, R-L
Pre-Wash Pump Assembly, ADC-66, L-R
Pre-Wash Pump Assembly, ADC-66, R-L
Control System Assembly, ADC-66, L-R
Control System Assembly, ADC-66, R-L
Water Inlet Assembly, ADC-66, L-R
Water Inlet Assembly, ADC-66, R-L
Heater & Water Level Control, ADC-66, L-R
Heater & Water Level Control, ADC-66, R-L
Drain System Assembly, ADC-66, L-R
Drain System Assembly, ADC-66, R-L
3
261-0300
Cabinet Assembly
ADC-66 L-R
American Dish Service
4
261-0300
Cabinet Assembly
ADC-66 L-R
Ref.
No.
Part No.
No.
Req.
1
N/S
2
3
4
5
6
7
8
9
10
N/S
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
N/S
285-6174
281-6211
289-6611
286-6197
285-6122
286-6179
285-6145
285-6123
286-6200
285-6152
285-6172
281-6210
285-6197
285-6215
285-6162
286-6182
285-6216
285-6119
287-6161
289-9125
289-9109
289-9114
285-6202
285-6227
099-1024
285-6151
285-6201
285-6217
098-1414
285-6221
1
Rep.
3
1
1
1
1
2
1
1
1
Rep.
1
1
1
1
1
1
1
1
1
1
1
1
4
4
2
1
4
1
American Dish Service
Description
Filter Weldment, Wash Pump, w/Taper
Filter w/O-Ring, Wash Pump
Gasket, O-Ring, Pre-Wash, Wash, and Rinse Taper
Plate, Wash Pump Filter, L-R
Screen Weldment, Wash, Small
Cover, Wash Manifold
Screen Weldment, Wash L-R, Large
Screen Weldment, Rinse Tank
Plate, Rinse Stand Tube, L-R
Cover Weldment, Rinse Float, L-R
Plug Weldment, Rinse Stand Tube
Drain Stand Tube w/O-Ring, Rinse Pump
Pre-Wash Screen Basket
Cover Weldment, ADC-66, Pre-Wash Screen Basket
Filter Screen Weldment, Rinse Pump
Guard, Wash Magnet
Bushing Mount Weldment, LH, ADC-66, Idler Arm
Drip Chute Weldment
Baffle, Pre-Wash Tank
Scrap Trap, L-R
Tray, Scrap Trap, Complete
Support, Scrap Trap
Pan Weldment, ADC-66, L-R
Frame Weldment, ADC-66, L-R
Bullet Feet
Front Panel Mount Weldment, Lower
Panel Weldment, Front
Bushing Mount Weldment, RH, ADC-66, Idler Arm
Bolt, ¼-20 x ½”, TH, SS
Cover, ADC-66, L-R, Pre-Wash Transfer Chute
5
261-0300
Cabinet Assembly
ADC-66 L-R
American Dish Service
6
261-0300
Cabinet Assembly
ADC-66 L-R
Ref.
No.
Part No.
No.
Req.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
N/S
098-2507
285-6199
285-6115
284-6122
299-1001
299-1002
284-6121
285-6233
285-6139
285-6125
098-8008
285-6193
285-6205
287-6123
285-6103
099-4502
098-1423
098-2404
285-6116
098-1414
285-6147
287-6157
46
1
2
2
2
3
3
1
2
1
4
1
1
4
2
2
26
46
2
16
1
1
American Dish Service
Description
Locknut, ¼-20, SS
Hood Weldment, L-R
Hood End Shield Weldment
Curtain Rod, 5/16” x 20.5”, SS
Curtain, 21” Wide x 17” Tall
Curtain, 23” Wide x 11” Tall
Curtain Rod, 5/16” x 24”, SS
Door Weldment, ADC-66, Wash Tank
Handle Weldment, Front Access Door
Latch Weldment, Door
Cotter Pin, 3/32” x 1”, SS
Pre-Wash Door Weldment
Pre-Wash Door Latch Weldment
Door Guide, SS
Bracket, Door Cut-Off
Switch, Door Cut-Off
Bolt, ¼-20 x ½”, HH, SS
Washer, ¼”, SS
Vent Weldment, Hood End Shield
Bolt, ¼-20 x ½”, TH, SS
Duct Weldment, Inlet Water, L-R
Brace, Pan Rear
7
261-0400
Cabinet Assembly
ADC-66 R-L
American Dish Service
8
261-0400
Cabinet Assembly
ADC-66 R-L
Ref.
No.
Part No.
No.
Req.
1
N/S
2
3
4
5
6
7
8
9
10
N/S
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
N/S
285-6174
281-6211
289-6611
286-6174
285-6122
286-6179
285-6121
285-6123
286-6176
285-6126
285-6172
281-6210
285-6197
285-6215
285-6162
286-6182
285-6217
285-6119
287-6161
289-9126
289-9109
289-9114
285-6203
285-6228
099-1024
285-6151
285-6201
285-6216
098-1414
285-6220
1
Rep.
3
1
1
1
1
2
1
1
1
Rep.
1
1
1
1
1
1
1
1
1
1
1
1
4
4
2
1
4
1
American Dish Service
Description
Filter Weldment, Wash Pump, w/Taper
Filter w/O-Ring, Wash Pump
Gasket, O-Ring, Pre-Wash, Wash, and Rinse Taper
Plate, Wash Pump Filter, R-L
Screen Weldment, Wash, Small
Cover, Wash Manifold
Screen Weldment, Wash R-L, Large
Screen Weldment, Rinse Tank
Plate, Rinse Stand Tube, R-L
Cover Weldment, Rinse Float, R-L
Plug Weldment, Rinse Stand Tube
Drain Stand Tube w/O-Ring, Rinse Pump
Pre-Wash Screen Basket
Cover Weldment, ADC-66, Pre-Wash Screen Basket
Filter Screen Weldment, Rinse Pump
Guard, Wash Magnet
Bushing Mount Weldment, RH, ADC-66, Idler Arm
Drip Chute Weldment
Baffle, Pre-Wash Tank
Scrap Trap, R-L
Tray, Scrap Trap, Complete
Support, Scrap Trap
Pan Weldment, ADC-66, R-L
Frame Weldment, ADC-66, R-L
Bullet Feet
Front Panel Mount Weldment, Lower
Panel Weldment, Front
Bushing Mount Weldment, LH, ADC-66, Idler Arm
Bolt, ¼-20 x ½”, TH, SS
Cover, ADC-66, R-L, Pre-Wash Transfer Chute
9
261-0400
Cabinet Assembly
ADC-66 R-L
American Dish Service
10
261-0400
Cabinet Assembly
ADC-66 R-L
Ref.
No.
Part No.
No.
Req.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
N/S
098-2507
285-6200
285-6115
284-6122
299-1001
299-1002
284-6121
285-6233
285-6139
285-6125
098-8008
285-6193
285-6205
287-6123
285-6103
099-4502
098-1423
098-2404
285-6116
098-1414
285-6127
287-6157
46
1
2
2
2
3
3
1
2
1
4
1
1
4
2
2
26
46
2
16
1
1
American Dish Service
Description
Locknut, ¼-20, SS
Hood Weldment, R-L
Hood End Shield Weldment
Curtain Rod, 5/16” x 20.5”, SS
Curtain, 21” Wide x 17” Tall
Curtain, 23” Wide x 11” Tall
Curtain Rod, 5/16” x 24”, SS
Door Weldment, ADC-66, Wash Tank
Handle Weldment, Front Access Door
Latch Weldment, Door
Cotter Pin, 3/32” x 1”, SS
Pre-Wash Door Weldment
Pre-Wash Door Latch Weldment
Door Guide, SS
Bracket, Door Cut-Off
Switch, Door Cut-Off
Bolt, ¼-20 x ½”, HH, SS
Washer, ¼”, SS
Vent Weldment, Hood End Shield
Bolt, ¼-20 x ½”, TH, SS
Duct Weldment, Inlet Water, R-L
Brace, Pan Rear
11
268-1000
Conveyor Drive & Tray Track
Control, ADC-66 L-R
American Dish Service
12
268-1000
Conveyor Drive & Tray Track
Control, ADC-66 L-R
Ref.
No.
Part No.
No.
Req.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
285-6133
285-6134
298-3001
284-6142
298-4001
284-6141
284-6139
284-6149
284-6202
285-6136
285-6137
285-6135
284-6140
298-4002
284-6143
291-1003
291-1004
284-6201
284-6137
284-6134
098-1441
284-6135
286-6189
281-6201
098-1611
098-2710
098-1614
098-1506
098-1802
098-2802
098-1801
098-2801
098-1612
098-2708
285-6212
098-2404
285-6225
285-6224
098-8009
285-6214
1
2
2
2
2
1
1
2
1
13
2
1
1
2
2
1
1
1
1
1
2
1
1
1
6
10
6
2
2
2
1
1
17
17
1
18
1
1
2
1
American Dish Service
Description
Rocker Arm Weldment
Slip Clutch Bar Weldment
Spring, Slip Clutch
Spacer, Rocker Arm
Bushing, 1” OD x ¾” ID x 7/8” Lg
Block, Pillow Bushing, RH
Block, Base, Pillow Bushing
Spacer, Conveyor Connecting Bolt
Bar, Conveyor, ADC-66
Dog Weldment, Conveyor
Exit Dog Weldment, Conveyor
Idler Arm Weldment
Block, Pillow Bushing, LH
Bushing, Idler Arm, 5/8” OD x 3/8” ID x 5/8” Lg
Spacer, Idler Arm, 5/8” OD x 3/8” ID x 3/8” Lg
Motor, 1/3 HP, 3 Ph
Gear Box (53:1)
Key, Conveyor Drive Motor
Key, Cam Block
Cam Block (A), Gear Box Side
Set Screw, ¼-20 x ½” Lg
Cam Block (B), Cam Follower Side
Bolt, Lock, Cam Follower
Bearing, Cam Follower
Bolt, 3/8-16 x 2”, HH, SS
Lockwasher, 3/8”, SS
Bolt, 3/8” x 1”, HH, SS
Bolt, 5/16-18 x ¾”, HH, SS
Bolt, ½-13 x 1 ¼”, HH, SS
Lockwasher, ½”, SS
Bolt, ½-13 x 4”, HH, SS
Locknut, ½-13, SS
Bolt, 3/8-16 x 1 1/8” w/ ¾” Shoulder, HH, SS
Locknut, 3/8-16, SS
Dog Weldment, ADC-66
Washer, ¼”, SS
Tray Track Weldment, ADC-66, L-R, Rear
Tray Track Weldment, ADC-66, L-R, Front
Dowel Pin, 3/16” x 1” Lg, SS
Sequence Bar Weldment, ADC-66, L-R, Pre-Wash
13
268-1000
Conveyor Drive & Tray Track
Control, ADC-66 L-R
American Dish Service
14
268-1000
Conveyor Drive & Tray Track
Control, ADC-66 L-R
Ref.
No.
Part No.
No.
Req.
41
42
43
44
45
46
47
48
49
50
N/S
N/S
285-6108
285-6107
285-6109
098-1428
098-2507
098-2506
098-2501
286-6178
286-6113
291-3011
288-1047
288-1053
1
1
3
6
6
3
3
4
4
3
Rep.
Tool
American Dish Service
Description
Tray Track Sequence Bar Weldment, Rinse
Tray Track Sequence Bar Weldment, Wash
Magnet Weldment, Tray Track Sequence Bar
Bolt, ¼-20 x 1 1/8” Lg, HH, SS
Locknut, ¼-20, SS
Lockwasher, 5/16”, SS
Locknut, 5/16-18, SS
Bracket, Tray Track, Mount
Bracket, Reed Switch
Switch, Reed
Conveyor Drive Motor and Gear Box Assembly
Tool, Conveyor Clutch Spring
15
268-1100
Conveyor Drive & Tray Track
Control, ADC-66 R-L
American Dish Service
16
268-1100
Conveyor Drive & Tray Track
Control, ADC-66 R-L
Ref.
No.
Part No.
No.
Req.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
285-6133
285-6134
298-3001
284-6142
298-4001
284-6141
284-6139
284-6149
284-6202
285-6136
285-6137
285-6135
284-6140
298-4002
284-6143
291-1003
291-1004
284-6201
284-6137
284-6134
098-1441
284-6135
286-6189
281-6201
098-1611
098-2710
098-1614
098-1506
098-1802
098-2802
098-1801
098-2801
098-1612
098-2708
285-6212
098-2404
285-6223
285-6222
098-8009
285-6213
1
2
2
2
2
1
1
2
1
13
2
1
1
2
2
1
1
1
1
1
2
1
1
1
6
10
6
2
2
2
1
1
17
17
1
18
1
1
2
1
American Dish Service
Description
Rocker Arm Weldment
Slip Clutch Bar Weldment
Spring, Slip Clutch
Spacer, Rocker Arm
Bushing, 1” OD x ¾” ID x 7/8” Lg
Block, Pillow Bushing, RH
Block, Base, Pillow Bushing
Spacer, Conveyor Connecting Bolt
Bar, Conveyor, ADC-66
Dog Weldment, Conveyor
Exit Dog Weldment, Conveyor
Idler Arm Weldment
Block, Pillow Bushing, LH
Bushing, Idler Arm, 5/8” OD x 3/8” ID x 5/8” Lg
Spacer, Idler Arm, 5/8” OD x 3/8” ID x 3/8” Lg
Motor, 1/3 HP, 3 Ph
Gear Box (53:1)
Key, Conveyor Drive Motor
Key, Cam Block
Cam Block (A), Gear Box Side
Set Screw, ¼-20 x ½” Lg
Cam Block (B), Cam Follower Side
Bolt, Lock, Cam Follower
Bearing, Cam Follower
Bolt, 3/8-16 x 2”, HH, SS
Lockwasher, 3/8”, SS
Bolt, 3/8” x 1”, HH, SS
Bolt, 5/16-18 x ¾”, HH, SS
Bolt, ½-13 x 1 ¼”, HH, SS
Lockwasher, ½”, SS
Bolt, ½-13 x 4”, HH, SS
Locknut, ½-13, SS
Bolt, 3/8-16 x 1 1/8” w/ ¾” Shoulder, HH, SS
Locknut, 3/8-16, SS
Dog Weldment, ADC-66
Washer, ¼”, SS
Tray Track Weldment, ADC-66, R-L, Rear
Tray Track Weldment, ADC-66, R-L, Front
Dowel Pin, 3/16” x 1” Lg, SS
Sequence Bar Weldment, ADC-66, R-L, Pre-Wash
17
268-1100
Conveyor Drive & Tray Track
Control, ADC-66 R-L
American Dish Service
18
268-1100
Conveyor Drive & Tray Track
Control, ADC-66 R-L
Ref.
No.
Part No.
No.
Req.
41
42
43
44
45
46
47
48
49
50
N/S
N/S
285-6108
285-6107
285-6109
098-1428
098-2507
098-2506
098-2501
286-6178
286-6113
291-3011
288-1047
288-1053
1
1
3
6
6
3
3
4
4
3
Rep.
Tool
American Dish Service
Description
Tray Track Sequence Bar Weldment, Rinse
Tray Track Sequence Bar Weldment, Wash
Magnet Weldment, Tray Track Sequence Bar
Bolt, ¼-20 x 1 1/8” Lg, HH, SS
Locknut, ¼-20, SS
Lockwasher, 5/16”, SS
Locknut, 5/16-18, SS
Bracket, Tray Track, Mount
Bracket, Reed Switch
Switch, Reed
Conveyor Drive Motor and Gear Box Assembly
Tool, Conveyor Clutch Spring
19
265-0900 L-R Spray System
Assembly
265-1000 R-L Spray System
Assembly(Shown)
ADC-66
American Dish Service
20
265-0900 L-R Spray System
Assembly
265-1000 R-L Spray System
Assembly(Shown)
ADC-66
Ref.
No.
Part No.
1
2
3
4
5
6
7
8
9
10
N/S
11A
11B
11C
11D
11E
11F
12A
12B
12C
12D
12E
12F
13A
13B
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
285-6159
285-6129
285-6128
286-6177
285-6156
285-6155
285-6166
285-6168
285-6167
098-2507
285-6158
281-6208
281-6206
281-6204
281-6202
285-6142
285-6140
281-6209
281-6207
281-6205
281-6203
285-6143
285-6141
284-6146
284-6145
292-1011
292-1003
292-3009
292-1002
292-3010
292-1012
292-3001
285-6170
285-6169
289-6608
098-1423
285-6130
285-6198
285-6236
285-6237
American Dish Service
No.
Req.
1
1
1
1
1
1
1
1
1
8
14
1
1
8
2
1
1
2
1
1
1
2
2
1
1
1
1
Description
Upper Wash Arm Weldment Assembly
Handle Weldment, Upper Wash Arm Mount
Tee Plate Weldment, Upper Wash Arm
Bracket, Upper Wash Arm Mount
Lower Wash Arm Weldment Assembly
Manifold Weldment, Inside Wash
Manifold Weldment, Inside Pumped Rinse
Spray Arm Weldment, Pumped Rinse, Upper, L-R
Spray Arm Weldment, Pumped Rinse, Lower, L-R
Locknut, ¼-20, SS
Spray Arm Endcap Weldment
Spray Arm, Final Rinse, Upper, L-R, SS Jets
Spray Arm, Final Rinse, Upper, L-R, Poly Jets
Spray Arm, Final Rinse, Upper, R-L, SS Jets
Spray Arm, Final Rinse, Upper, R-L, Poly Jets
Spray Arm Weld., Final Rinse, Upper, L-R, Arm Only
Spray Arm Weld., Final Rinse, Upper, R-L, Arm Only
Spray Arm, Final Rinse, Lower, L-R, SS Jets
Spray Arm, Final Rinse, Lower, L-R, Poly Jets
Spray Arm, Final Rinse, Lower, R-L, SS Jets
Spray Arm, Final Rinse, Lower, R-L, Poly Jets
Spray Arm Weld., Final Rinse, Lower, L-R, Arm Only
Spray Arm Weld., Final Rinse, Lower, R-L, Arm Only
Jets, Final Rinse Spray Arm, SS
Jets, Final Rinse Spray Arm, Poly
Cap, ½” FPT, SS
Fitting, ½” FPT 90° Elbow, SS
Nipple, ½” x 21 ½” Lg, SS
Fitting, ½” x ½” x ½” Tee, SS
Nipple, ½” x 3”, SS
Plug, ½” MPT, SS
Nipple, ½” x 1 ½” Lg, SS
Spray Arm, Pumped Rinse, Upper, R-L
Spray Arm, Pumped Rinse, Lower, R-L
Gasket, O-Ring, Wash Arm
Bolt, ¼-20 x ½”, HH, SS
Handle Weldment, Wash Arm Mount, Lower
Manifold Weldment, Pre-Wash
Spray Arm Weldment R-L, ADC-66, Lower Pre-Wash
Spray Arm Weldment R-L, ADC-66, Upper Pre-Wash
21
265-0900 L-R Spray System
Assembly
265-1000 R-L Spray System
Assembly(Shown)
ADC-66
American Dish Service
22
265-0900 L-R Spray System
Assembly
265-1000 R-L Spray System
Assembly(Shown)
ADC-66
Ref.
No.
Part No.
29
30
N/S
N/S
285-6234
285-6235
288-1057
288-1055
American Dish Service
No.
Req.
Tool
Tool
Description
Spray Arm Weldment L-R, ADC-66, Lower Pre-Wash
Spray Arm Weldment L-R, ADC-66, Upper Pre-Wash
Tool, Spray Arm Pressure Tester, w/Gauge
Tool, Spray Arm Pressure Tester, w/o Gauge
23
263-0100
Wash Pump Assembly
ADC-66 L-R/R-L
American Dish Service
24
263-0100
Wash Pump Assembly
ADC-66 L-R/R-L
Ref.
No.
Part No.
No.
Req.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
N/S
291-1002
282-6301
089-6601
289-6606
098-2510
292-2001
289-6603
282-6303
284-6151
098-1613
098-2711
282-6302
289-6604
285-6153
289-6605
285-6154
285-6157
289-6607
292-1013
098-1423
098-2404
098-1614
098-2711
098-1514
098-2509
098-2710
098-1502
288-1048
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
2
1
6
6
16
8
4
8
8
4
Rep.
American Dish Service
Description
Motor, 3 HP, 3 Phase, w/Shaft
Rear Housing, Wash Pump
Gasket, Sump
Gasket, O-Ring, Drain Socket Flange
Washer, SS/Rubber
Seal, Wash Pump
Gasket, Wash Pump, O-Ring
Impeller, Wash Pump
Key, Wash Pump, Impeller
Bolt, 3/8-16 x 1” Lg, HH, SS, w/Lock Strip
Washer, 3/8” ID x 1” OD x .103” Thick, SS
Cover, Wash Pump
Gasket, Wash Pump, Discharge Flange
Discharge Tube Weldment, Wash Pump
Gasket, Wash Pump Intake Flange
Intake Tube, Sump Weldment, Wash Pump
Drain Socket Weldment, Wash
Gasket, Wash Tank Flange
Petcock, ¼” MPT
Bolt, ¼-20 x ½”, HH, SS
Washer, ¼”, SS
Bolt, 3/8-16 x 1” Lg, HH, SS
Washer, 3/8” ID x .103 Thick, SS
Bolt, 5/16-18 x 1 ½”, HH, SS
Washer, 5/16”, SS
Lockwasher, 3/8”, SS
Bolt, 5/16-18 x ½”, HH, SS
Pump Assembly, Less Cover, Wash, 3 HP, 3 Phase
25
263-0300L-R / 263-0400R-L
Rinse Pump Assembly
ADC-66
American Dish Service
26
263-0300L-R / 263-0400R-L
Rinse Pump Assembly
ADC-66
Ref.
No.
Part No.
No.
Req.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
N/S
N/S
N/S
291-1003
282-6307
286-6250
284-6163
098-1442
292-2002
289-6609
282-6308
098-1443
098-2413
285-6164
289-6610
285-6165
282-6306
285-6161
285-6160
285-6163
098-1607
098-1426
098-2404
098-2507
092-1002
288-1040
288-1049
288-1050
1
1
1
1
2
1
1
1
1
1
1
4
1
1
1
1
1
8
16
32
16
1
Rep.
Rep.
Rep.
American Dish Service
Description
Motor, 1/3 HP, 3 Phase
Rear Housing, Pumped Rinse
Plate, Pump Rinse Motor Support, w/Pad
Pump Shaft, Pumped Rinse
Set Screw, ¼-20 x 3/8” Lg
Seal, Pumped Rinse Pump
Gasket, Pumped Rinse Pump
Impeller, Pumped Rinse Pump
Bolt, ¼-28 x 3/8” Lg, HH, SS
Washer, .285 ID x .625 OD x .086 Thick, SS
Discharge Tube Weldment, L-R
Gasket, Flange, Pumped Rinse Pump
Discharge Flange Assembly Weldment
Cover, Pumped Rinse Pump
Intake Flange Weldment Assembly
Intake Tube Weldment
Discharge Tube Weldment, R-L
Bolt, 3/8-16 x 7/8”, HH, SS
Bolt, ¼-20 x ¾”, HH, SS
Washer, ¼”, SS
Locknut, ¼-20, SS
Petcock, 1/8” MPT
Kit, Rinse Pump Seal
Pump Assembly, Less Cover, Rinse, 1/3 HP, 3 Phase
Pump Assembly, Less Flanges, Rinse, 1/3 HP, 3 Phase
27
263-0600 L-R Pre-Wash Pump
Assembly
263-0700 R-L Pre-Wash Pump
Assembly
ADC-66
263-0700 R-L
Pre-Scrap Pump Assembly
263-0600 L-R
Dischage Tube
American Dish Service
28
263-0600 L-R Pre-Wash Pump
Assembly
263-0700 R-L Pre-Wash Pump
Assembly
ADC-66
Ref.
No.
Part No.
No.
Req.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
291-1009
082-6301
285-6229
098-1512
098-2502
092-2001
089-6309
082-6306
285-6241
285-6204
285-6226
289-6610
285-6165
082-6307
285-6161
285-6192
285-6230
098-1607
098-1426
098-2404
098-2507
092-1002
098-2503
1
1
1
4
4
1
1
1
1
1
1
6
1
1
1
1
1
4
24
48
24
1
4
American Dish Service
Description
Motor, 1 ½ HP, 1 Phase, ADC-66
Rear Housing, Pre-Wash
Suction Tube Extension Weldment, Pre-Wash
Stud, 5/16-18 x 1 5/8”, SS
Nut, 5/16-18, SS
Seal, Pre-Wash Pump
O-Ring, Pump
Impeller
Suction Tube Weldment, Pre-Wash, R-L
Discharge Tube Weldment, Pre-Wash, L-R
Discharge Tube Weldment, Pre-Wash, R-L
Gasket, Flange, Pre-Wash Pump Flange
Discharge Flange Assembly Weldment
Cover, Pre-Wash Pump
Intake Flange Weldment
Suction Tube Weldment, Pre-Wash, L-R
Discharge Tube Extension Weldment, Pre-Wash
Bolt, 3/8-16 x 7/8”, HH, SS
Bolt, ¼-20 x ¾”, HH, SS
Washer, ¼”, SS
Locknut, ¼-20, SS
Petcock, 1/8”
Washer, 5/16”, Copper
29
264-0500 L-R
Control System Assembly
264-0600 R-L
Control System Assembly
ADC-66
American Dish Service
30
264-0500 L-R
Control System Assembly
264-0600 R-L
Control System Assembly
ADC-66
Ref.
No.
Part No.
No.
Req.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
N/S
N/S
285-6231
286-6111
286-6180
299-1005
299-1004
391-5101
285-6240
285-6102
291-3020
291-3001
291-3002
291-3003
291-3009
291-3005
291-9107
285-6239
287-6104
291-3006
291-3007
091-7006
098-2308
099-4502
284-6101
091-3008
291-3008
098-2507
098-1423
291-7101
286-6107
391-9101
291-3023
291-3021
091-5010
291-5106
291-5104
291-9105
096-1002
096-1008
291-3011
291-3022
1
2
1
2
1
1
1
1
1
4
1
2
3
3
1
1
1
1
1
2
2
2
1
1
1
13
2
1
1
1
1
1
1
1
2
1
1
1
3
1
American Dish Service
Description
Control Box Weldment
Control Box Mounts
Bracket, Temperature Gauge
Temperature Gauge, Wash and Rinse Tank
Temperature Gauge, Final Rinse
Terminal Block
Power Box Weldment, R-L
Cover Weldment, Control Box
Circuit Breaker, 60 Amp, 3 Pole
Contactor
Overload, 3 HP, 3 Phase
Overload, 1/3 HP, 3 Phase
Socket, Relay
Relay, 110V, DPDT
Din Rail, 22” Lg
Power Box Weldment, L-R
Cover, Power Box
Relay, Mercury, 50 Amp, Wash Heater
Relay, Mercury, 30 Amp, Rinse Heater
Light, Heater
Wingnut, ¼-20, SS
Switch, Door Cut-Off
Bar, Control Box Safety
Switch, Master
Relay, Time Delay, 6 Second
Locknut, ¼-20, SS
Bolt, ¼-20 x ½”, HH, SS
Light, Indicator
Terminal Block Plate
Fuse Holder
Overload, 1 ½ HP
Circuit Breaker, 20 Amp, 3 Pole
Terminal Block, 110V
Terminal Block, 110V
Terminal Lock, Chemical Dispenser, 2 Pole
Boot, Master Switch Cover
Control Box Lock
Control Box Dummy Lock
Switch, Reed
Switch, ADC-66 Pre-Wash, Reed (Normally Open)
31
264-0500 L-R
Control System Assembly
264-0600 R-L
Control System Assembly
ADC-66
American Dish Service
32
264-0500 L-R
Control System Assembly
264-0600 R-L
Control System Assembly
ADC-66
Ref.
No.
Part No.
No.
Req.
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
291-5102
289-0001
289-6617
289-9222
289-9301
291-5110
291-9108
091-4152
091-4004
286-6181
289-9201
289-9202
289-9206
289-9226
291-3016
286-6219
288-1044
288-1051
291-3015
299-1010
291-5111
1
1
1
1
1
1
4
1
1
1
1
1
1
1
Opt.
Opt.
Opt.
Opt.
Opt.
Rep.
Rep.
American Dish Service
Description
Ground Lug
Nameplate, ADS
Gasket Material, Control Box (78”)
Decal, NSF (244 Racks)
Wall Chart, Cleaning Instructions, ADS
Wire Harness, 3 Phase, ADC-66
Shield, Contactor Overload (Anti-Tamper)
Bell Box
Bell Box Cover
Bracket, Conduit (Back of Machine)
Decal, Label Set (Blue & Gray)
Decal, Label Set (Yellow & Black for Inside Control Box)
Decal, Temperature Gauge, Final Rinse, 180°
Decal, Wiring Diagram
Counter, Rack Timer
Bracket, Rack Timer Counter
Kit, Table Limit Switch
Kit, Rack Timer
Switch Only, Table Limit
Cover, Temperature Gauge (Screw-On)
Heater Wiring Harness Kit, ADC-66
33
265-1100 L-R Water Inlet
Assembly ADC-66
265-1200 R-L Water Inlet
American Dish Service
Assembly ADC-66
265-1200 R-L
Water Inlet Assembly
265-1100 L-R
Water Inlet Assembly
34
265-1100 L-R Water Inlet
Assembly ADC-66
265-1200 R-L Water Inlet
Assembly ADC-66
Ref.
No.
Part No.
No.
Req.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
N/S
31
32
33
34A
34B
35
36
37
38
092-1074
092-9006
092-9008
092-1073
092-1107
286-6191
092-5015
098-9027
292-5001
092-5045
292-3007
285-6219
098-1423
098-2507
389-6603
299-1004
292-1005
292-5002
299-1003
292-3002
292-3004
292-1014
292-1007
292-1001
292-3001
292-1003
292-3008
292-3003
292-1004
284-6148
284-6147
292-1008
292-1002
292-1012
285-6147
285-6127
292-3010
392-3001
092-1068
292-3013
1
1
Rep.
1
1
2
2
4
1
1
1
1
4
4
1
1
1
1
1
5
2
2
1
3
3
3
1
2
1
1
Opt.
2
1
1
1
1
1
1
1
1
American Dish Service
Description
Fitting, ¾” Street Elbow, 90°
Y-Line Strainer, ¾”
Screen, Line Strainer, ¾” (Repair Part)
Nipple, ¾” Close, Brass
Fitting, Tee, ¾” x ½” x ½”, Brass
Bracket, Plumbing
Valve, Water Solenoid
U-Bolt, ¼-20, SS
Pressure Regulator, ½”
Vacuum Breaker, ½”
Nipple, ½” x 6”, Brass
Air Gap Weldment
Bolt, ¼-20x ½”, HH, SS
Locknut, ¼-20, SS
Gasket, Air Gap
Temperature Gauge, Final Rinse
Reducer Bushing, ½” MPT x ¼” FPT, Brass
Service Cock
Pressure Gauge
Nipple, ½” x 1 ½” Lg, Brass
Nipple, ½” x 2” Lg, Brass
Fitting, ½” Elbow, 90°, Brass
Reducer Bushing, ½” MPT x 1/8” FPT Brass
Fitting, Tee, ½” FPT x ½” FPT x ½” FPT, Brass
Nipple, ½” x 1 ½” Lg, SS
Fitting, Elbow, ½” FPT, SS
Nipple, ½” x 6” Lg, SS
Nipple, ½” x Close, SS
Union, ½”, SS
Mixing Chamber, SS
Mixing Chamber, Polymer
Pipe Plug, 1/8” MPT, SS
Fitting, Tee, ½” FPT x ½” FPT, ½” FPT, SS
Pipe Plug, ½” MPT, SS
Inlet Water Duct Weldment, L-R
Inlet Water Duct Weldment, R-L
Nipple, ½” x 3” Lg, SS
Nipple, ½” x 4 ½” Lg, Brass
Fitting, ½” Comp x ½” MPT, 90° Elbow
Fresh Water Supply Tube, ½” OD x 14 ½” Lg, SS
35
265-1100 L-R Water Inlet
Assembly ADC-66
265-1200 R-L Water Inlet
American Dish Service
Assembly ADC-66
265-1200 R-L
Water Inlet Assembly
265-1100 L-R
Water Inlet Assembly
36
265-1100 L-R Water Inlet
Assembly ADC-66
265-1200 R-L Water Inlet
Assembly ADC-66
Ref.
No.
Part No.
No.
Req.
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
092-5019
092-5025
092-5047
092-5049
092-5051
292-5003
092-5016
092-5017
Rep.
Rep.
Rep.
Rep.
Rep.
Rep.
Rep.
Rep.
American Dish Service
Description
Cap Assembly, Bonnet and Tube, Water Solenoid, ½”
Valve, Less Coil, Water Solenoid, ½”
Kit, Vacuum Breaker, Watts, ½”
Cap, Vacuum Breaker, ½”, Watts
Bonnet and Stem, Vacuum Breaker, Watts, ½”
Kit, Pressure Regulator, ½” Replacement
Kit, Water Solenoid Valve, ½” Replacement
Coil, Water Solenoid, ½” Replacement
37
268-1200 L-R
Heater & Water Level Control
ADC-66
American Dish Service
38
268-1200 L-R
Heater & Water Level Control
ADC-66
Ref.
No.
Part No.
No.
Req.
1
2
2A
2B
2C
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
N/S
N/S
285-6177
291-3014
291-3013
291-9109
291-9110
286-6246
285-6179
285-6180
286-6248
285-6176
286-6199
291-9007
285-6178
285-6181
286-6249
285-6162
291-9003
291-3012
286-6175
098-2201
098-2510
098-1516
098-2501
289-6613
286-6231
286-6241
1
2
Rep.
Rep.
Rep.
2
2
1
1
2
2
1
1
1
1
1
1
2
2
8
16
8
8
2
2
4
American Dish Service
Description
Float Box Weldment, LH
Float Switch w/Holder and Button
Float Switch Only
Float Switch Holder
Button, Float Switch Holder
Float Box Cover
Float Switch Flipper Weldment
Float Rod Tube Weldment, Wash, L-R
Float Rod, Wash
Float Weldment
Bracket, Float Retainer
Heater, Wash, 18 KW
Float Box Weldment, RH
Float Rod Tube Weldment, Rinse, L-R
Float Rod, Rinse
Filter Weldment, Pumped Rinse Pump
Heater, Rinse, 2.25 KW, 3 Phase
Thermostat
Heater Box Cover
Locknut, 8-32, SS
Washer, 5/16”, SS/Neobond
Bolt, 5/16-18 x 1”, HH, SS
Locknut, 5/16-18, SS
Gasket, Heater
Flange, Heater Sandwich (1 ½” Hole)
Washer, Float Switch Rod, ¾” OD x 1/8” ID, SS
39
268-1300 R-L
Heater & Water Level Control
ADC-66
American Dish Service
40
268-1300 R-L
Heater & Water Level Control
ADC-66
Ref.
No.
Part No.
No.
Req.
1
2
2A
2B
2C
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
N/S
N/S
285-6177
291-3014
291-3013
291-9109
291-9110
286-6246
285-6179
285-6148
286-6248
285-6176
286-6199
291-9007
285-6178
285-6149
286-6249
285-6162
291-9003
291-3012
286-6175
098-2201
098-2510
098-1516
098-2501
289-6613
286-6231
286-6241
1
2
Rep.
Rep.
Rep.
2
2
1
1
2
2
1
1
1
1
1
1
2
2
8
16
8
8
2
2
4
American Dish Service
Description
Float Box Weldment, LH
Float Switch w/Holder and Button
Float Switch Only
Float Switch Holder
Button, Float Switch Holder
Float Box Cover
Float Switch Flipper Weldment
Float Rod Tube Weldment, Wash, R-L
Float Rod, Wash
Float Weldment
Bracket, Float Retainer
Heater, Wash, 18 KW
Float Box Weldment, RH
Float Rod Tube Weldment, Rinse, R-L
Float Rod, Rinse
Filter Weldment, Pumped Rinse Pump
Heater, Rinse, 2.25 KW, 3 Phase
Thermostat
Heater Box Cover
Locknut, 8-32, SS
Washer, 5/16”, SS/Neobond
Bolt, 5/16-18 x 1”, HH, SS
Locknut, 5/16-18, SS
Gasket, Heater
Flange, Heater Sandwich (1 ½” Hole)
Washer, Float Switch Rod, ¾” OD x 1/8” ID, SS
41
266-0700 L-R
Drain System Assembly
ADC-66
American Dish Service
42
266-0700 L-R
Drain System Assembly
ADC-66
Ref.
No.
Part No.
No.
Req.
1
2
3
4
5
6
7
8
9
10
11
12
13
292-1029
285-6154
285-6157
292-1028
289-6606
289-6605
089-6601
285-6211
285-6207
285-6175
289-6612
285-6209
092-1084
3
1
1
3
1
1
1
1
1
2
2
1
1
American Dish Service
Description
No-Hub Connector, Fitting to Pipe
Intake Tube/Sump Weldment, Wash
Drain Socket Weldment, Wash
No-Hub Connector, Pipe to Pipe
Gasket, O-Ring, Drain Socket Flange
Gasket, Wash Pump Intake Flange
Gasket, Sump
2” Copper Drain Weldment, Rinse, L-R
2” Copper Drain Weldment, Wash, L-R
Rinse, Pre-Wash, Drain Socket Weldment
Gasket, Rinse, Pre-Wash Drain Socket Flange
2” Copper Drain Weldment, Pre-Wash, L-R
Plug, Pipe, 2”
43
266-0800 R-L
Drain System Assembly
ADC-66
American Dish Service
44
266-0800 R-L
Drain System Assembly
ADC-66
Ref.
No.
Part No.
No.
Req.
1
2
3
4
5
6
7
8
9
10
11
12
13
292-1029
285-6154
285-6157
292-1028
289-6606
289-6605
089-6601
285-6210
285-6206
285-6175
289-6612
285-6208
092-1084
3
1
1
3
1
1
1
1
1
2
2
1
1
American Dish Service
Description
No-Hub Connector, Fitting to Pipe
Intake Tube/Sump Weldment, Wash
Drain Socket Weldment, Wash
No-Hub Connector, Pipe to Pipe
Gasket, O-Ring, Drain Socket Flange
Gasket, Wash Pump Intake Flange
Gasket, Sump
2” Copper Drain Weldment, Rinse, R-L
2” Copper Drain Weldment, Wash, R-L
Rinse, Pre-Wash, Drain Socket Weldment
Gasket, Rinse, Pre-Wash Drain Socket Flange
2” Copper Drain Weldment, Pre-Wash, R-L
Plug, Pipe, 2”
45
American Dish Service
Manufacturer of low and high temperature
Commercial Dishwashers and Glasswashers
900 Blake Street
Edwardsville, Kansas 66111
Ph:(913) 422-3700
Fax:(913) 422-6630