Download Alpine IVA-D900 User's Manual

Parking Brake Lead Connection
If necessary, use a pinch connector to connect the foot brake lead, parking brake lead, etc.
1
2
Vehicle Cable
Pliers
Pinch Connector
Monitor Cable
Stopper
Foot Brake Lead / Parking Brake Lead Connection
Foot brake lamp
FOOT BRAKE
IVA-D900
Tuner Box
(Yellow/Black)
Pinch
Connector
Foot brake lead
Foot brake switch
Chassis
PARKING BRAKE
Battery
Parking brake lamp
(Yellow/Blue)
Pinch
Connector
Parking brake lead
Parking brake switch
Connection Diagram of SPST Switch (Sold Separately)
(If the ACC power supply is not available)
SPST SW (Optional)
IGNITION
(Red)
BATTERY
IVA-D900
(Monitor and
Tuner Box)
(Yellow)
Battery
• If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately).
• If the switched power (ignition) lead of the IVA-D900 is connected directly to the positive (+) post of the vehicle‘s battery, the IVA-D900 draws
some current (several hundred milliamperes) even when its switch is placed in the OFF position and the battery may be discharged.
70-EN