Download Eaton ERA010 rack accessory

Electrical Group
Eaton Industries Pty Ltd
ABN 66 103 014 571
10 Kent Road
Mascot, NSW Australia 2020
www.eaton.com/powerquality
1300 UPS UPS (1300 877 877)
Enclosure Baying Kit
Use Baying Kit to join two or more Racks together.
Features

Bays two or more racks together

Bays at front and rear frame

Lines up the rack

Improves rack stability

RoHS compliant

Conforms to ASTM D160-01 and ASTM B117 (500 hours salt spray test)
Material / Finish

High grade cold rolled steel 2.00 mm thickness

Powder coat finish preceded by 5 stage iron phosphate pre-treatment

Standard colour is low gloss black.
Part List
1. Baying Bracket
2. Screws
Part Number
Part Description
ERA010
Enclosure Baying Kit (set of 4)
© 2013 Eaton, All Rights Reserved
Enclosure Baying Kit
Page 1 of 2
Dimensions (in mm.)
Installation
1. Level racks so that baying bracket holes are aligned.
2. Using T-3 Torque wrench or screw driver, fit the screw as shown.
3. Repeat for all four brackets.
Note: Torque 25-30 inch lbs
© 2013 Eaton, All Rights Reserved
Enclosure Baying Kit
Page 2 of 2