Download Eaton ERA010 rack accessory
Transcript
Electrical Group Eaton Industries Pty Ltd ABN 66 103 014 571 10 Kent Road Mascot, NSW Australia 2020 www.eaton.com/powerquality 1300 UPS UPS (1300 877 877) Enclosure Baying Kit Use Baying Kit to join two or more Racks together. Features Bays two or more racks together Bays at front and rear frame Lines up the rack Improves rack stability RoHS compliant Conforms to ASTM D160-01 and ASTM B117 (500 hours salt spray test) Material / Finish High grade cold rolled steel 2.00 mm thickness Powder coat finish preceded by 5 stage iron phosphate pre-treatment Standard colour is low gloss black. Part List 1. Baying Bracket 2. Screws Part Number Part Description ERA010 Enclosure Baying Kit (set of 4) © 2013 Eaton, All Rights Reserved Enclosure Baying Kit Page 1 of 2 Dimensions (in mm.) Installation 1. Level racks so that baying bracket holes are aligned. 2. Using T-3 Torque wrench or screw driver, fit the screw as shown. 3. Repeat for all four brackets. Note: Torque 25-30 inch lbs © 2013 Eaton, All Rights Reserved Enclosure Baying Kit Page 2 of 2